XStream serializes Java objects to XML and back again. Versions prior to 1.4.20 may allow a remote attacker to terminate the application with a stack overflow error, resulting in a denial of service only via manipulation the processed input stream. The attack uses the hash code implementation for collections and maps to force recursive hash calculation causing a stack overflow. This issue is patched in version 1.4.20 which handles the stack overflow and raises an InputManipulationException instead. A potential workaround for users who only use HashMap or HashSet and whose XML refers these only as default map or set, is to change the default implementation of java.util.Map and java.util per the code example in the referenced advisory. However, this implies that your application does not care about the implementation of the map and all elements are comparable.

Those using Woodstox to parse XML data may be vulnerable to Denial of Service attacks (DOS) if DTD support is enabled. If the parser is running on user supplied input, an attacker may supply content that causes the parser to crash by stackoverflow. This effect may support a denial of service attack.

XStream through 1.4.9, when a certain denyTypes workaround is not used, mishandles attempts to create an instance of the primitive type 'void' during unmarshalling, leading to a remote application crash, as demonstrated by an xstream.fromXML("<void/>") call.

XStream is an open source java library to serialize objects to XML and back again. Versions prior to 1.4.19 may allow a remote attacker to allocate 100% CPU time on the target system depending on CPU type or parallel execution of such a payload resulting in a denial of service only by manipulating the processed input stream. XStream 1.4.19 monitors and accumulates the time it takes to add elements to collections and throws an exception if a set threshold is exceeded. Users are advised to upgrade as soon as possible. Users unable to upgrade may set the NO_REFERENCE mode to prevent recursion. See GHSA-rmr5-cpv2-vgjf for further details on a workaround if an upgrade is not possible.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to allocate 100% CPU time on the target system depending on CPU type or parallel execution of such a payload resulting in a denial of service only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to occupy a thread that consumes maximum CPU time and will never return. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is vulnerability which may allow a remote attacker to allocate 100% CPU time on the target system depending on CPU type or parallel execution of such a payload resulting in a denial of service only by manipulating the processed input stream. No user is affected who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.11.0, a STUN packet whose declared attribute length is shorter than the structure the parser casts to causes the parser to read and write past the end of the attribute, producing an out-of-bounds memory access on the per-leg media buffer. This issue has been patched in version 1.11.0.

ipmi-oem in FreeIPMI before 1.6.18 has exploitable buffer overflows on response messages. The Intelligent Platform Management Interface (IPMI) specification defines a set of interfaces for platform management. It is implemented by a large number of hardware manufacturers to support system management. It is most commonly used for sensor reading (e.g., CPU temperatures through the ipmi-sensors command within FreeIPMI) and remote power control (the ipmipower command). The ipmi-oem client command implements a set of a IPMI OEM commands for specific hardware vendors. If a user has supported hardware, they may wish to use the ipmi-oem command to send a request to a server to retrieve specific information. Two subcommands "ipmi-oem dell get-active-directory-config" and "ipmi-oem fujitsu get-sel-entry-long-text" were found to have exploitable buffer overflows on response messages.

Tenda AC15 v15.03.05.19_multi_TD01 has a stack overflow via the list parameter in the fromSetIpMacBind function.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

IBM Security Identity Manager (IBM Security Verify Password Synchronization Plug-in for Windows AD 10.x) is vulnerable to a denial of service, caused by a heap-based buffer overflow in the Password Synch Plug-in. An authenticated attacker could exploit this vulnerability to cause a denial of service. IBM X-Force ID: 217369.

When a classification profile is configured on a virtual server without an HTTP or HTTP/2 profile, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Transient DOS due to buffer over-read in WLAN while parsing WLAN CSA action frames.

IBM Security Identity Manager (IBM Security Verify Password Synchronization Plug-in for Windows AD 10.x) is vulnerable to a denial of service, caused by a heap-based buffer overflow in the Password Synch Plug-in. An authenticated attacker could exploit this vulnerability to cause a denial of service. IBM X-Force ID: 218379.

A Stack-based Buffer Overflow vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on MX Series and SRX series allows an unauthenticated networked attacker to cause a flowd crash and thereby a Denial of Service (DoS). Continued receipt of these specific packets will cause a sustained Denial of Service condition. This issue can be triggered by a specific Session Initiation Protocol (SIP) invite packet if the SIP ALG is enabled. Due to this, the PIC will be rebooted and all traffic that traverses the PIC will be dropped. This issue affects: Juniper Networks Junos OS 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R2; 21.3 versions prior to 21.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1.

Tenda M3 V1.0.0.12(4856) was discovered to contain a heap buffer overflow vulnerability in the function formEmailTest. This vulnerability allows attackers to cause a Denial of Service (DoS) via the mailpwd parameter.

Tenda M3 V1.0.0.12 was discovered to contain a stack overflow via the function formGetPassengerAnalyseData.

TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the desc parameter in the function FUN_00412ef4.

A vulnerability exists in the HCI Modbus TCP function included in the product versions listed above. If the HCI Modbus TCP is enabled and configured, an attacker could exploit the vulnerability by sending a specially crafted message to the RTU500 in a high rate, causing the targeted RTU500 CMU to reboot. The vulnerability is caused by a lack of flood control which eventually if exploited causes an internal stack overflow in the HCI Modbus TCP function.

A buffer overflow in the vobsub_get_subpic_duration() function of GPAC v2.4.0 allows attackers to cause a Denial of Service (DoS) via a crafted packet.

striso-control-firmware 54c9722 is vulnerable to Buffer Overflow in function AuxJack.

Tenda AC21 V 16.03.08.15 is vulnerable to Buffer Overflow via /bin/httpd, setSchedWifi.

Tenda M3 V1.0.0.12 was discovered to contain a stack overflow via the items parameter in the function formdelMasteraclist.

TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the desc parameter in the function FUN_00413be4.

TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the cloneMac parameter in the function FUN_0041af40.

Tenda M3 V1.0.0.12 was discovered to contain multiple stack overflow vulnerabilities via the ssidList, storeName, and trademark parameters in the function formSetStoreWeb.

MOXA NPort 5110: Firmware Versions 2.10 is vulnerable to an out-of-bounds write that can cause the device to become unresponsive.

Pyramid Solutions' affected products, the Developer and DLL kits for EtherNet/IP Adapter and EtherNet/IP Scanner, are vulnerable to an out-of-bounds write, which may allow an unauthorized attacker to send a specially crafted packet that may result in a denial-of-service condition.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the pskSecret parameter at /userRpm/WlanSecurityRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A call stack overflow bug in the SAML login feature in Mattermost server in versions up to and including 6.3.2 allows an attacker to crash the server via submitting a maliciously crafted POST body.

A denial of service vulnerability when rendering RDoc files in GitLab CE/EE versions 10 to 14.7.7, 14.8.0 to 14.8.5, and 14.9.0 to 14.9.2 allows an attacker to crash the GitLab web application with a maliciously crafted RDoc file

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the name parameter in the /usb_paswd.asp endpoint.

A buffer overflow vulnerability exists in libsndfile version 1.2.2 and potentially earlier versions when processing malformed IRCAM audio files. The vulnerability occurs in the ircam_read_header function at src/ircam.c:164 during sample rate processing, leading to memory corruption and potential code execution.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11, triggered by the dnsserver1 and dnsserver2 parameters at /userRpm/WanSlaacCfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the 'ip' parameter at /userRpm/WanStaticIpV6CfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A stack overflow bug in the document extractor in Mattermost Server in versions up to and including 6.3.2 allows an attacker to crash the server via submitting a maliciously crafted Apple Pages document.

Tenda AC Series Router AC18_V15.03.05.19(6318) was discovered to contain a stack-based buffer overflow in the httpd module when handling /goform/WifiExtraSet request.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of parameters in the /user_group.asp endpoint. The attacker can exploit this vulnerability by sending a crafted HTTP GET request with parameters name, mem, pri, and attr.

A Stack-based Buffer Overflow issue was discovered in Emerson Process Management ControlWave Micro Process Automation Controller: ControlWave Micro [ProConOS v.4.01.280] firmware: CWM v.05.78.00 and prior. A stack-based buffer overflow vulnerability caused by sending crafted packets on Port 20547 could force the PLC to change its state into halt mode.

Tenda M3 V1.0.0.12(4856) was discovered to contain a stack overflow in the function formDelPushedAd. This vulnerability allows attackers to cause a Denial of Service (DoS) via the adPushUID parameter.

An issue was discovered in NAS in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, 990, 850, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 2400, W920, W930, W1000, Modem 5123, Modem 5300, Modem 5400. The lack of a length check leads to out-of-bounds writes.

A heap corruption in WhatsApp can be caused by a malformed RTP packet being sent after a call is established. The vulnerability can be used to cause denial of service. It affects WhatsApp for Android prior to v2.18.293, WhatsApp for iOS prior to v2.18.93, and WhatsApp for Windows Phone prior to v2.18.172.

Tenda M3 V1.0.0.12(4856) was discovered to contain a heap buffer overflow vulnerability in the function formEmailTest. This vulnerability allows attackers to cause a Denial of Service (DoS) via the mailname parameter.

Multiple Denial-of-Service vulnerabilities was discovered in the F-Secure Atlant and in certain WithSecure products while scanning fuzzed PE32-bit files cause memory corruption and heap buffer overflow which eventually can crash the scanning engine. The exploit can be triggered remotely by an attacker.

A heap buffer overflow in vax_opfunction in radare2 5.4.2 and 5.4.0.