D-Link DNR-322L contains a download of code without integrity check vulnerability that could allow an authenticated attacker to execute OS level commands on the device. The impacted products could be end-of-life (EoL) and/or end-of-service (EoS). Users should discontinue product utilization.
Apply mitigations per vendor instructions, follow applicable BOD 22-01 guidance for cloud services, or discontinue use of the product if mitigations are unavailable.
A vulnerability, which was classified as critical, has been found in D-Link DIR-619L B1 2.06. Affected by this issue is the function formSetLog of the file /goform/formSetLog. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability classified as critical was found in D-Link DIR-619L B1 2.06. This vulnerability affects the function formDeviceReboot of the file /goform/formDeviceReboot. The manipulation of the argument next_page leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in D-Link DIR-619L B1 2.06. It has been declared as critical. This vulnerability affects the function formEasySetupWWConfig of the file /goform/formEasySetupWWConfig. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability classified as critical has been found in D-Link DIR-605L 2.13B01 BETA. This affects the function formSetWAN_Wizard51/formSetWAN_Wizard52. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
In the "webupg" binary of D-Link DIR-825 G1, because of the lack of parameter verification, attackers can use "cmd" parameters to execute arbitrary system commands after obtaining authorization.
An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_move_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument photo_name leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this issue is the function cgi_get_fullscreen_photos of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument user leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
A vulnerability has been found in D-Link DIR-619L B1 2.06 and classified as critical. Affected by this vulnerability is the function formSetMuti of the file /goform/formSetMuti. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000 up to 20230922. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /log/decodmail.php. The manipulation of the argument file leads to deserialization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-270368. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
D-Link DSL-3782 v1.03 and below was discovered to contain a command injection vulnerability via the function byte_4C0160.
A vulnerability has been found in D-Link DIR-605L 2.13B01 BETA and classified as critical. This vulnerability affects the function formSetWanPPPoE of the file /goform/formSetWanPPPoE. The manipulation of the argument webpage leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in D-Link DIR-619L B1 2.06 and classified as critical. Affected by this issue is the function formEasySetTimezone of the file /goform/formEasySetTimezone. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This affects the function cgi_create_album of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument current_path leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.
prog.cgi on D-Link DIR-3060 devices before 1.11b04 HF2 allows remote authenticated users to inject arbitrary commands in an admin or root context because SetVirtualServerSettings calls CheckArpTables, which calls popen unsafely.
D-Link DIR-610 devices allow Remote Command Execution via the cmd parameter to command.php. NOTE: This vulnerability only affects products that are no longer supported by the maintainer
D-link DIR-816 A2_v1.10CNB04.img is vulnerable to Command injection via /goform/form2userconfig.cgi.
<p>A remote code execution vulnerability exists in Microsoft SharePoint where APIs aren't properly protected from unsafe data input. An attacker who successfully exploited the vulnerability could run arbitrary code in the context of the SharePoint application pool and the SharePoint server farm account.</p> <p>Exploitation of this vulnerability requires that a user access a susceptible API on an affected version of SharePoint with specially-formatted input.</p> <p>The security update addresses the vulnerability by correcting how SharePoint handles deserialization of untrusted data.</p>
<p>A remote code execution vulnerability exists in Microsoft SharePoint when the software fails to check the source markup of an application package. An attacker who successfully exploited the vulnerability could run arbitrary code in the context of the SharePoint application pool and the SharePoint server farm account.</p> <p>Exploitation of this vulnerability requires that a user uploads a specially crafted SharePoint application package to an affected version of SharePoint.</p> <p>The security update addresses the vulnerability by correcting how SharePoint checks the source markup of application packages.</p>
<p>A remote code execution vulnerability exists in Microsoft SharePoint when the software fails to check the source markup of an application package. An attacker who successfully exploited the vulnerability could run arbitrary code in the context of the SharePoint application pool and the SharePoint server farm account.</p> <p>Exploitation of this vulnerability requires that a user uploads a specially crafted SharePoint application package to an affected version of SharePoint.</p> <p>The security update addresses the vulnerability by correcting how SharePoint checks the source markup of application packages.</p>
A CWE-494: Download of Code Without Integrity Check vulnerability exists in PLC Simulator on EcoStruxureª Control Expert (now Unity Pro) (all versions) that could cause unauthorized command execution when sending specially crafted requests over Modbus.
The S. Siedle & Soehne SG 150-0 Smart Gateway before 1.2.4 allows remote code execution via the backup functionality in the web frontend. By using an exploit chain, an attacker with access to the network can get root access on the gateway.