IBM WebSphere Automation for IBM Cloud Pak for Watson AIOps 1.4.2 could provide a weaker than expected security. A local attacker can create an outbound network connection to another system. IBM X-Force ID: 240827.
Session fixation vulnerability in IBM InfoSphere Master Data Management - Collaborative Edition 10.x before 10.1 IF5 and 11.0 before IF1 and InfoSphere Master Data Management Server for Product Information Management 9.x before 9.1 IF11 allows remote authenticated users to hijack web sessions via unspecified vectors.
The Risk Based Access functionality in IBM Tivoli Federated Identity Manager (TFIM) 6.2.2 before FP9 and Tivoli Federated Identity Manager Business Gateway (TFIMBG) 6.2.2 before FP9 does not prevent reuse of One Time Password (OTP) tokens, which makes it easier for remote authenticated users to complete transactions by leveraging access to an already-used token.
In Enterprise Networking Operating System (ENOS) in Lenovo and IBM RackSwitch and BladeCenter products, an authentication bypass known as "HP Backdoor" was discovered during a Lenovo security audit in the serial console, Telnet, SSH, and Web interfaces. This bypass mechanism can be accessed when performing local authentication under specific circumstances. If exploited, admin-level access to the switch is granted.
Session fixation vulnerability in IBM Cognos Command Center before 10.2 allows remote attackers to hijack web sessions via an authorization cookie.
An unprivileged write to the file handler flaw in the Linux kernel's control groups and namespaces subsystem was found in the way users have access to some less privileged process that are controlled by cgroups and have higher privileged parent process. It is actually both for cgroup2 and cgroup1 versions of control groups. A local user could use this flaw to crash the system or escalate their privileges on the system.
IBM Rational Policy Tester 8.5 before 8.5.0.5 does not properly check authorization for changes to the set of authentication hosts, which allows remote authenticated users to perform spoofing attacks involving an HTTP redirect via unspecified vectors.
IBM Cognos Analytics 11.0 could allow a local user to change parameters set from the Cognos Analytics menus without proper authentication. IBM X-Force ID: 136857.
The Meeting Server in IBM Sametime 8.x through 8.5.2.1 and 9.x through 9.0.0.1 allows remote attackers to determine which meeting rooms are owned by a user by leveraging knowledge of valid user names.
IBM Rational Requirements Composer before 4.0.4 does not properly perform authentication, which has unspecified impact and remote attack vectors.
The login page in the Console in IBM InfoSphere Optim Data Growth for Oracle E-Business Suite 6.x, 7.x, and 9.x before 9.1.0.3 does not limit the number of incorrect authentication attempts, which makes it easier for remote attackers to obtain access via a brute-force attack.
An exploitable denial-of-service vulnerability exists in the Linux kernel prior to mainline 5.3. An attacker could exploit this vulnerability by triggering AP to send IAPP location updates for stations before the required authentication process has completed. This could lead to different denial-of-service scenarios, either by causing CAM table attacks, or by leading to traffic flapping if faking already existing clients in other nearby APs of the same wireless infrastructure. An attacker can forge Authentication and Association Request packets to trigger this vulnerability.
The Meeting Server in IBM Sametime 8.x through 8.5.2.1 and 9.x through 9.0.0.1 does not send the HSTS Strict-Transport-Security header, which makes it easier for man-in-the-middle attackers to hijack sessions or obtain sensitive information by leveraging the presence of HTTP requests.
IBM WebSphere Commerce 6.x through 6.0.0.11 and 7.x through 7.0.0.7 does not properly perform authentication for unspecified web services, which allows remote attackers to issue requests in the context of an arbitrary user's active session via unknown vectors.
IBM WebSphere Message Broker 6.1 before 6.1.0.12, 7.0 before 7.0.0.6, and 8.0 before 8.0.0.2 does not validate Basic Authentication credentials before proceeding to WS-Addressing and WS-Security operations, which allows remote attackers to trigger transmission of unauthenticated messages via unspecified vectors.
The IBM WebSphere DataPower XC10 Appliance 2.0.0.0 through 2.0.0.3 and 2.1.0.0 through 2.1.0.2 does not require authentication for an unspecified interface, which allows remote attackers to cause a denial of service (process exit) via unknown vectors.
The management GUI on the IBM SAN Volume Controller and Storwize V7000 6.x before 6.4.1.3 allows remote attackers to bypass authentication and obtain superuser access via IP packets.
IBM Spectrum Copy Data Management 2.2.13 and earlier has weak authentication and password rules and incorrectly handles default credentials for the Spectrum Copy Data Management Admin console. IBM X-Force ID: 214957.
servlet/traveler in IBM Lotus Notes Traveler through 8.5.3.3 Interim Fix 1 does not properly restrict invalid authentication attempts, which makes it easier for remote attackers to obtain access via a brute-force attack.
The Collaboration Server in IBM InfoSphere Master Data Management Server for Product Information Management 9.x through 9.1 and InfoSphere Master Data Management - Collaborative Edition 10.x through 10.1, 11.0 before FP7, and 11.3 and 11.4 before 11.4 FP1 allows remote authenticated users to modify the administrator's credentials and consequently gain privileges via unspecified vectors.
The Netlink implementation in the Linux kernel before 3.2.30 does not properly handle messages that lack SCM_CREDENTIALS data, which might allow local users to spoof Netlink communication via a crafted message, as demonstrated by a message to (1) Avahi or (2) NetworkManager.
The Java servlets in the management console in IBM Tivoli Federated Identity Manager (TFIM) through 6.2.2 and Tivoli Federated Identity Manager Business Gateway (TFIMBG) before 6.2.2 do not require authentication for all resource downloads, which allows remote attackers to bypass intended J2EE security constraints, and obtain sensitive information related to (1) federation metadata or (2) a web plugin configuration template, via a crafted request.
IBM FlashSystem 5300 USB ports may be usable even if the port has been disabled by the administrator. A user with physical access to the system could use the USB port to cause loss of access to data. IBM X-Force ID: 295935.
Information Services Framework (ISF) in IBM InfoSphere Information Server 8.1, 8.5 before FP3, and 8.7 does not properly determine authorization, which allows remote authenticated users to gain privileges via unspecified vectors.
The default installation of Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, does not require authentication, which allows remote attackers to gain administrator privileges by connecting to TCP port 14247.
The LDAP login feature in bos.rte.security 6.1.6.4 in IBM AIX 6.1, when ldap_auth is enabled in ldap.cfg, allows remote attackers to bypass authentication via a login attempt with an arbitrary password.
The remote console in the Server Controller in IBM Lotus Domino 7.x and 8.x verifies credentials against a file located at a UNC share pathname specified by the client, which allows remote attackers to bypass authentication, and consequently execute arbitrary code, by placing this pathname in the COOKIEFILE field. NOTE: this might overlap CVE-2011-0920.
IBM DS8900F HMC 89.21.19.0, 89.21.31.0, 89.30.68.0, 89.32.40.0, and 89.33.48.0 could allow a remote attacker to bypass authentication restrictions for authorized user. IBM X-Force ID: 269409.
The default configuration of the server console in IBM Lotus Domino does not require a password (aka Server_Console_Password), which allows physically proximate attackers to perform administrative changes or obtain sensitive information via a (1) Load, (2) Tell, or (3) Set Configuration command.
The server in IBM Tivoli Storage Manager (TSM) 5.1.x, 5.2.x before 5.2.1.2, and 6.x before 6.1 does not require credentials to observe the server console in some circumstances, which allows remote authenticated administrators to monitor server operations by establishing a console mode session, related to "session exposure."
The Web User Interface on the IBM TS3100 and TS3200 tape libraries with firmware before A.60 allows remote attackers to bypass authentication and obtain administrative access via unspecified vectors.
The Remote Console in IBM Lotus Domino, when a certain unsupported configuration involving UNC share pathnames is used, allows remote attackers to bypass authentication and execute arbitrary code via unspecified vectors, aka SPR PRAD89WGRS.
The TCP-to-ODBC gateway in IBM Tivoli Provisioning Manager for OS Deployment 7.1.1.3 does not require authentication for SQL statements, which allows remote attackers to modify, create, or read database records via a session on TCP port 2020. NOTE: the vendor disputes this issue, stating that the "default Microsoft Access database is not password protected because it is intended to be used for evaluation purposes only.
The Connection Manager in IBM Lotus Mobile Connect (LMC) before 6.1.4, when HTTP Access Services (HTTP-AS) is enabled, does not delete LTPA tokens in response to use of the iNotes Logoff button, which might allow physically proximate attackers to obtain access via an unattended client, related to a cookie domain mismatch.
The audit facility in the Security component in IBM DB2 UDB 9.5 before FP6a uses instance-level audit settings to capture connection (aka CONNECT and AUTHENTICATION) events in certain circumstances in which database-level audit settings were intended, which might make it easier for remote attackers to connect without discovery.
The ESSearchApplication directory tree in IBM OmniFind Enterprise Edition 8.x and 9.x does not require authentication, which allows remote attackers to modify the server configuration via a request to palette.do.
A local authentication bypass vulnerability in HPE System Management Homepage for Windows and Linux version prior to v7.6.1 was found.
The slapi_printmessage function in IBM Tivoli Directory Server (ITDS) before 6.0.0.8-TIV-ITDS-IF0006 allows remote attackers to cause a denial of service (daemon crash) via multiple incomplete DIGEST-MD5 connection attempts.
Session fixation vulnerability in the Workplace (aka WP) component in IBM FileNet P8 Application Engine (P8AE) 4.0.2.x before 4.0.2.7-P8AE-FP007 allows remote attackers to hijack web sessions via unspecified vectors.
There is a difficult to exploit improper authentication issue in the Home application for Esri Portal for ArcGIS versions 11.2 and below on Windows and Linux, and ArcGIS Enterprise 11.1 and below on Kubernetes which, under unique circumstances, could potentially allow a remote, unauthenticated attacker to compromise the confidentiality, integrity, and availability of the software.
IBM Tivoli Federated Identity Manager (TFIM) 6.2.0 before 6.2.0.2, when configured as an OpenID relying party, does not perform the expected login rejection upon receiving an OP-Identifier from an OpenID provider, which allows remote attackers to bypass authentication via unspecified vectors.
IBM Security Guardium 10.0 does not prove or insufficiently proves that the actors identity is correct which can lead to exposure of resources or functionality to unintended actors. IBM X-Force ID: 124739.
IBM Security Guardium 10.0 and 10.1 does not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas. IBM X-Force ID: 124685
The SSH USERAUTH CHANGE REQUEST feature in SSH Tectia Server 6.0.4 through 6.0.20, 6.1.0 through 6.1.12, 6.2.0 through 6.2.5, and 6.3.0 through 6.3.2 on UNIX and Linux, when old-style password authentication is enabled, allows remote attackers to bypass authentication via a crafted session involving entry of blank passwords, as demonstrated by a root login session from a modified OpenSSH client with an added input_userauth_passwd_changereq call in sshconnect2.c.
IBM Tivoli Endpoint Manager (IBM BigFix Platform 9.2 and 9.5) does not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas. IBM X-Force ID: 123862.
The lookup_cb_cred function in fs/nfsd/nfs4callback.c in the nfsd4 subsystem in the Linux kernel before 2.6.31.2 attempts to access a credentials cache even when a client specifies the AUTH_NULL authentication flavor, which allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via an NFSv4 mount request.
Unspecified vulnerability in IBM WebSphere MQ 6.0.x before 6.0.2.2 and 5.3 before Fix Pack 14 allows attackers to bypass access restrictions for a queue manager via a SVRCONN (MQ client) channel.
sctp in Linux kernel before 2.6.25.18 allows remote attackers to cause a denial of service (OOPS) via an INIT-ACK that states the peer does not support AUTH, which causes the sctp_process_init function to clean up active transports and triggers the OOPS when the T1-Init timer expires.
The Web Services Security component in IBM WebSphere Application Server 7.0 before Fix Pack 1 (7.0.0.1), 6.1 before Fix Pack 23 (6.1.0.23),and 6.0.2 before Fix Pack 33 (6.0.2.33) does not properly enforce (1) nonce and (2) timestamp expiration values in WS-Security bindings as stored in the com.ibm.wsspi.wssecurity.core custom property, which allows remote authenticated users to conduct session hijacking attacks.
The Servlet Engine/Web Container component in IBM WebSphere Application Server (WAS) 6.1 before 6.1.0.25 and 7.0 before 7.0.0.5, when SPNEGO Single Sign-on (SSO) and disableSecurityPreInvokeOnFilters are configured, allows remote attackers to bypass authentication via a request for a "secure URL," related to a certain invokefilterscompatibility property.