The Gutentor WordPress plugin before 3.3.6 does not validate and escape some of its block options before outputting them back in a page/post where the block is embed, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks

A vulnerability was detected in Blossom up to 1.17.1. This vulnerability affects the function content of the file blossom-backend/backend/src/main/java/com/blossom/backend/server/article/draft/ArticleController.java of the component Article Title Handler. The manipulation results in cross site scripting. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Cross-site scripting (XSS) vulnerability in the WebVPN login page in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to inject arbitrary web script or HTML via an unspecified parameter, aka Bug ID CSCun19025.

WBCE CMS 1.5.2 is vulnerable to Cross Site Scripting (XSS) via \admin\pages\sections_save.php namesection2 parameters.

A vulnerability, which was classified as problematic, was found in Subscribe to Comments Plugin up to 2.0.7 on WordPress. This affects an unknown part of the file subscribe-to-comments.php. The manipulation leads to cross site scripting. It is possible to initiate the attack remotely. Upgrading to version 2.0.8 is able to address this issue. The identifier of the patch is 9683bdf462fcac2f32b33be98f0b96497fbd1bb6. It is recommended to upgrade the affected component. The identifier VDB-222321 was assigned to this vulnerability.

Stored cross-site scripting (XSS) vulnerability in the Site module's user membership administration page in Liferay Portal 7.0.1 through 7.4.1, and Liferay DXP 7.0 before fix pack 102, 7.1 before fix pack 26, 7.2 before fix pack 15, and 7.3 before service pack 3 allows remote attackers to inject arbitrary web script or HTML via the a user's name.

Stored Cross-Site Scripting (XSS) in Alkacon's OpenCms v18.0, which occurs when user input is not properly validated when sending a POST request to ‘/blog/new-article/org.opencms.ugc.CmsUgcEditService.gwt’ using the ‘text’ parameter.

A vulnerability, which was classified as problematic, was found in Elefant CMS 1.3.12-RC. This affects an unknown part of the component Blog Post Handler. The manipulation leads to basic cross site scripting (Persistent). It is possible to initiate the attack remotely. Upgrading to version 1.3.13 is able to address this issue. It is recommended to upgrade the affected component.

A spoofing vulnerability exists when Microsoft SharePoint Server does not properly sanitize a specially crafted web request to an affected SharePoint server, aka 'Microsoft SharePoint Spoofing Vulnerability'. This CVE ID is unique from CVE-2020-1104, CVE-2020-1107.

GFI MailEssentials AI versions prior to 22.4 contain a stored cross-site scripting vulnerability in the Attachment Filtering rule creation workflow. An authenticated user can supply HTML/JavaScript in the ctl00$ContentPlaceHolder1$pv1$TXB_RuleName parameter to /MailEssentials/pages/MailSecurity/attachmentchecking.aspx, which is stored and later rendered in the management interface, allowing script execution in the context of a logged-in user.

openITCOCKPIT before 3.7.3 has unnecessary files (such as Lodash files) under the web root, which leads to XSS.

FileRise is a self-hosted web file manager / WebDAV server. Prior to 3.3.0, an HTML Injection vulnerability allows an authenticated user to modify the DOM and add e.g. form elements that call certain endpoints or link elements that redirect the user on active interaction. This vulnerability is fixed in 3.3.0.

The Email Viewer in RainLoop through 1.6.0 allows XSS via a crafted email message.

In GLPI after 0.68.1 and before 9.4.6, multiple reflexive XSS occur in Dropdown endpoints due to an invalid Content-Type. This has been fixed in version 9.4.6.

The SVG Sanitizer extension for TYPO3 has a cross-site scripting vulnerability in versions before 1.0.3. Slightly invalid or incomplete SVG markup is not correctly processed and thus not sanitized at all. Albeit the markup is not valid it still is evaluated in browsers and leads to cross-site scripting. This is fixed in version 1.0.3.

LibreNMS is an auto-discovering PHP/MySQL/SNMP based network monitoring tool. Versions 24.10.0 through 26.1.1 are vulnerable to Stored XSS via the unit parameter in Custom OID. The Custom OID functionality lacks strip_tags() sanitization while other fields (name, oid, datatype) are sanitized. The unsanitized value is stored in the database and rendered without HTML escaping. This issue is fixed in version 26.2.0.

In TYPO3 CMS greater than or equal to 9.5.12 and less than 9.5.17, and greater than or equal to 10.2.0 and less than 10.4.2, it has been discovered that link tags generated by typolink functionality are vulnerable to cross-site scripting; properties being assigned as HTML attributes have not been parsed correctly. This has been fixed in 9.5.17 and 10.4.2.

SugarCRM v6.5.18 was discovered to contain a cross-site scripting (XSS) vulnerability in the Create Employee module. This vulnerability allows attackers to execute arbitrary web scripts or HTML via a crafted payload in the First Name or Last Name input fields.

ChurchCRM is an open-source church management system. In versions prior to 6.8.2, it was possible for an authenticated user with permission to edit groups to store a JavaScript payload that would execute when the group was viewed in the Group View. Version 6.8.2 fixes this issue.

An XSS vulnerability in the WP Lead Plus X plugin through 0.98 for WordPress allows logged-in users with minimal permissions to create or replace existing pages with a malicious page containing arbitrary JavaScript via the wp_ajax_core37_lp_save_page (aka core37_lp_save_page) AJAX action.

A cross-site-scripting (XSS) vulnerability exists when Microsoft SharePoint Server does not properly sanitize a specially crafted web request to an affected SharePoint server, aka 'Microsoft Office SharePoint XSS Vulnerability'. This CVE ID is unique from CVE-2020-1100, CVE-2020-1101, CVE-2020-1106.

Sourcecodester Online Market Place Site 1.0 is vulnerable to Cross Site Scripting (XSS), allowing attackers to register as a Seller then create new products containing XSS payloads in the 'Product Title' and 'Short Description' fields.

Jenkins Subversion Plugin 2.15.3 and earlier does not escape the name and description of List Subversion tags (and more) parameters on views displaying parameters, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission.

Wiki.js an open-source wiki app built on Node.js. Wiki.js before version 2.5.191 is vulnerable to stored cross-site scripting through mustache expressions in code blocks. This vulnerability exists due to mustache expressions being parsed by Vue during content injection even though it is contained within a `<pre>` element. By creating a crafted wiki page, a malicious Wiki.js user may stage a stored cross-site scripting attack. This allows the attacker to execute malicious JavaScript when the page is viewed by other users. For an example see referenced GitHub Security Advisory. Commit 5ffa189383dd716f12b56b8cae2ba0d075996cf1 fixes this vulnerability by adding the v-pre directive to all `<pre>` tags during the render.

A vulnerability was found in TrueConf Server 4.3.7. It has been classified as problematic. Affected is an unknown function of the file /admin/group/list/. The manipulation of the argument checked_group_id leads to basic cross site scripting (Reflected). It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Dell Wyse Management Suite 3.6.1 and below contains a Reflected Cross-Site Scripting Vulnerability in saveGroupConfigurations page. An authenticated attacker could potentially exploit this vulnerability, leading to the execution of malicious HTML or JavaScript code in a victim user's web browser in the context of the vulnerable web application. Exploitation may lead to information disclosure, session theft, or client-side request forgery.

Craft Commerce is an ecommerce platform for Craft CMS. In versions from 4.0.0-RC1 to 4.10.0 and from 5.0.0 to 5.5.1, a stored XSS vulnerability exists in Craft Commerce’s Order Status History Message. The message is rendered using the |md filter, which permits raw HTML, enabling malicious script execution. If a user has database backup utility permissions (which do not require an elevated session), an attacker can exfiltrate the entire database, including all user credentials, customer PII, order history, and 2FA recovery codes. This issue has been patched in versions 4.10.1 and 5.5.2.

In affected versions of WordPress, files with a specially crafted name when uploaded to the Media section can lead to script execution upon accessing the file. This requires an authenticated user with privileges to upload files. This has been patched in version 5.4.1, along with all the previously affected versions via a minor release (5.3.3, 5.2.6, 5.1.5, 5.0.9, 4.9.14, 4.8.13, 4.7.17, 4.6.18, 4.5.21, 4.4.22, 4.3.23, 4.2.27, 4.1.30, 4.0.30, 3.9.31, 3.8.33, 3.7.33).

A vulnerability has been found in Atahualpa Theme and classified as problematic. Affected by this vulnerability is an unknown functionality. The manipulation leads to basic cross site scripting. The attack can be launched remotely.

Jenkins promoted builds Plugin 873.v6149db_d64130 and earlier, except 3.10.1, does not validate the names of promotions defined in Job DSL, allowing attackers with Job/Configure permission to create a promotion with an unsafe name.

Vikunja is a todo-app to organize your life. Prior to 1.1.0, TaskGlanceTooltip.vue temporarily creates a div and sets the innerHtml to the description. Since there is no escaping on either the server or client side, a malicious user can share a project, create a malicious task, and cause an XSS on hover. This vulnerability is fixed in 1.1.0.

In LibreHealth EHR 2.0.0, lack of sanitization of the GET parameters formseq and formid in interface\orders\find_order_popup.php leads to multiple cross-site scripting (XSS) vulnerabilities.

Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to version 0.7.0, aanually modifying chat history allows setting the `html` property within document metadata. This causes the frontend to enter a code path that treats document contents as HTML, and render them in an iFrame when the citation is previewed. This allows stored XSS via a weaponized document payload in a chat. The payload also executes when the citation is viewed on a shared chat. Version 0.7.0 fixes the issue.

A spoofing vulnerability exists when Microsoft SharePoint Server does not properly sanitize a specially crafted web request to an affected SharePoint server, aka 'Microsoft SharePoint Spoofing Vulnerability'. This CVE ID is unique from CVE-2020-1289.

SCEditor is a lightweight WYSIWYG BBCode and XHTML editor. Prior to 3.2.1, if an attacker has the ability control configuration options passed to sceditor.create(), like emoticons, charset, etc. then it's possible for them to trigger an XSS attack due to lack of sanitisation of configuration options. This vulnerability is fixed in 3.2.1.

The Filemanager in CMS Made Simple 2.2.13 has stored XSS via a .pxd file, as demonstrated by m1_files[] to admin/moduleinterface.php.

A vulnerability classified as problematic was found in PHPList 3.2.6. This vulnerability affects unknown code of the file /lists/admin/ of the component List Name. The manipulation leads to cross site scripting (Persistent). The attack can be initiated remotely. Upgrading to version 3.3.1 is able to address this issue. It is recommended to upgrade the affected component.

In GLPI before version 9.4.6 there are multiple related stored XSS vulnerabilities. The package is vulnerable to Stored XSS in the comments of items in the Knowledge base. Adding a comment with content "<script>alert(1)</script>" reproduces the attack. This can be exploited by a user with administrator privileges in the User-Agent field. It can also be exploited by an outside party through the following steps: 1. Create a user with the surname `" onmouseover="alert(document.cookie)` and an empty first name. 2. With this user, create a ticket 3. As an administrator (or other privileged user) open the created ticket 4. On the "last update" field, put your mouse on the name of the user 5. The XSS fires This is fixed in version 9.4.6.

The Image Hover Effects Ultimate plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Video Link values that can be added to an Image Hover in versions up to, and including, 9.7.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. By default, the plugin only allows administrators access to edit Image Hovers, however, if a site admin makes the plugin's features available to lower privileged users through the 'Who Can Edit?' setting then this can be exploited by those users.

svelte performance oriented web framework. Prior to 5.51.5, when using <svelte:element this={tag}> in server-side rendering, the provided tag name is not validated or sanitized before being emitted into the HTML output. If the tag string contains unexpected characters, it can result in HTML injection in the SSR output. Client-side rendering is not affected. This vulnerability is fixed in 5.51.5.

svelte performance oriented web framework. From 5.39.3, <=5.51.4, in certain circumstances, the server-side rendering output of an <option> element does not properly escape its content, potentially allowing HTML injection in the SSR output. Client-side rendering is not affected. This vulnerability is fixed in 5.51.5.

Cross-site Scripting (XSS) - Stored in GitHub repository yetiforcecompany/yetiforcecrm prior to 6.4.0.

Solspace Freeform plugin for Craft CMS 5.x is a super flexible form-building tool. An authenticated, low-privilege user (able to create/edit forms) can inject arbitrary HTML/JS into the Craft Control Panel (CP) builder and integrations views. User-controlled form labels and integration metadata are rendered with dangerouslySetInnerHTML without sanitization, leading to stored XSS that executes when any admin views the builder/integration screens. This vulnerability is fixed in 5.14.7.

In BookStack greater than or equal to 0.18.0 and less than 0.29.2, there is an XSS vulnerability in comment creation. A user with permission to create comments could POST HTML directly to the system to be saved in a comment, which would then be executed/displayed to others users viewing the comment. Through this vulnerability custom JavaScript code could be injected and therefore ran on other user machines. This most impacts scenarios where not-trusted users are given permission to create comments. This has been fixed in 0.29.2.

Intrexx Portal Server before 12.0.2 allows XSS via a user-defined portlet.

In PrestaShop from version 1.5.3.0 and before version 1.7.6.6, there is a stored XSS when using the name of a quick access item. The problem is fixed in 1.7.6.6.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Visualmodo Borderless allows Cross-Site Scripting (XSS).This issue affects Borderless: from n/a through 1.5.8.

The WPCafe – Online Food Ordering, Restaurant Menu, Delivery, and Reservations for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Reservation Form shortcode in all versions up to, and including, 2.2.24 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The Photo Gallery by 10Web – Mobile-Friendly Image Gallery plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘svg’ parameter in all versions up to, and including, 1.8.23 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. By default, this can only be exploited by administrators, but the ability to use and configure Photo Gallery can be extended to contributors on pro versions of the plugin.