A vulnerability in the web-based management interface of ClearPass Policy Manager could allow a remote attacker authenticated with low privileges to access sensitive information. A successful exploit allows an attacker to retrieve information which could be used to potentially gain further access to network services supported by ClearPass Policy Manager.

A vulnerability exists in the Aruba AirWave Management Platform 8.x prior to 8.2 in the management interface of an underlying system component called RabbitMQ, which could let a malicious user obtain sensitive information. This interface listens on TCP port 15672 and 55672

A Remote Authentication bypass in Aruba ClearPass Policy Manager leads to complete cluster compromise. An authentication flaw in all versions of ClearPass could allow an attacker to compromise the entire cluster through a specially crafted API call. Network access to the administrative web interface is required to exploit this vulnerability. Resolution: Fixed in 6.7.6 and 6.6.10-hotfix.

HPE Cray Parallel Application Launch Service (PALS) is subject to an authentication bypass.

A remote authentication restriction bypass vulnerability was discovered in Aruba AirWave Management Platform version(s) prior to 8.2.12.1. Aruba has released patches for AirWave Management Platform that address this security vulnerability.

Vulnerabilities in the web-based management interface of Aruba EdgeConnect Enterprise Orchestrator could allow an unauthenticated remote attacker to bypass authentication. Successful exploitation of these vulnerabilities could allow an attacker to gain administrative privileges leading to a complete compromise of the Aruba EdgeConnect Enterprise Orchestrator with versions 9.1.2.40051 and below, 9.0.7.40108 and below, 8.10.23.40009 and below, and any older branches of Orchestrator not specifically mentioned.

An authentication bypass vulnerability exists in HPE StoreOnce Software.

In Aruba AirWave Glass before 1.3.3, there is a Server-Side Request Forgery vulnerability through an unauthenticated endpoint that if successfully exploited can result in disclosure of sensitive information. This can be used to perform an authentication bypass and ultimately gain administrative access on the web administrative interface.

A local authentication bypass vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.4.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x: 6.5.4.15 and below; Aruba Instant 8.3.x: 8.3.0.11 and below; Aruba Instant 8.4.x: 8.4.0.5 and below; Aruba Instant 8.5.x: 8.5.0.6 and below; Aruba Instant 8.6.x: 8.6.0.2 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

The vulnerability could be remotely exploited to bypass authentication.

Vulnerabilities in the web-based management interface of Aruba EdgeConnect Enterprise Orchestrator could allow an unauthenticated remote attacker to bypass authentication. Successful exploitation of these vulnerabilities could allow an attacker to gain administrative privileges leading to a complete compromise of the Aruba EdgeConnect Enterprise Orchestrator with versions 9.1.2.40051 and below, 9.0.7.40108 and below, 8.10.23.40009 and below, and any older branches of Orchestrator not specifically mentioned.

An issue was discovered in Mattermost Server before 3.0.2. The purposes of a session ID and a Session Token were mishandled.

An improper authentication vulnerability has been reported to affect QNAP NAS running Kazoo Server. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Kazoo Server: Kazoo Server 4.11.22 and later

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Developers can use the REST API to signup users and also allow users to login anonymously. Prior to version 4.5.1, when an anonymous user is first signed up using REST, the server creates session incorrectly. Particularly, the `authProvider` field in `_Session` class under `createdWith` shows the user logged in creating a password. If a developer later depends on the `createdWith` field to provide a different level of access between a password user and anonymous user, the server incorrectly classified the session type as being created with a `password`. The server does not currently use `createdWith` to make decisions about internal functions, so if a developer is not using `createdWith` directly, they are not affected. The vulnerability only affects users who depend on `createdWith` by using it directly. The issue is patched in Parse Server version 4.5.1. As a workaround, do not use the `createdWith` Session field to make decisions if one allows anonymous login.

Directus is a real-time API and App dashboard for managing SQL database content. Starting in version 9.12.0 and prior to version 11.9.0, Directus Flows with a manual trigger are not validating whether the user triggering the Flow has permissions to the items provided as payload to the Flow. Depending on what the Flow is set up to do this can lead to the Flow executing potential tasks on the attacker's behalf without authenticating. Bad actors could execute the manual trigger Flows without authentication, or access rights to the said collection(s) or item(s). Users with manual trigger Flows configured are impacted as these endpoints do not currently validate if the user has read access to `directus_flows` or to the relevant collection/items. The manual trigger Flows should have tighter security requirements as compared to webhook Flows where users are expected to perform do their own checks. Version 11.9.0 fixes the issue. As a workaround, implement permission checks for read access to Flows and read access to relevant collection/items.

Improper authentication in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network.

Improper authentication in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network.

Authentication bypass in vector-admin allows a user to register to a vector-admin server while “domain restriction” is active, even when not owning an authorized email address.

Netwrix Directory Manager (formerly Imanami GroupID) v.11.0.0.0 and before, as well as after v.11.1.25134.03 lacks Authentication for a Critical Function.

Improper access controls in the web management portal of the Tenda RX2 Pro 16.03.30.14 allows an unauthenticated remote attacker to enable telnet access to the router's OS by sending a /goform/telnet web request.

Bypass vulnerability in the network search instruction authentication module Impact: Successful exploitation of this vulnerability can bypass authentication and enable access to some network search functions.

Improper access controls in the web management portal of the Tenda RX2 Pro 16.03.30.14 allows an unauthenticated remote attacker to enable 'ate' (a remote system management binary) by sending a /goform/ate web request.

If you enable Basic Authentication in Pekko Management using the Java DSL, the authenticator may not be properly applied. Users that rely on authentication instead of making sure the Management API ports are only available to trusted users are recommended to upgrade to version 1.1.1, which fixes this issue. Akka was affected by the same issue and has released the fix in version 1.6.1.

The CTS Web transaction system related to authentication management is implemented incorrectly. After login, remote attackers can manipulate cookies to access other accounts and trade in the stock market with spoofed identity.

A vulnerability in Juniper Networks SRX Series device configured as a Junos OS Enforcer device may allow a user to access network resources that are not permitted by a UAC policy. This issue might occur when the IP address range configured in the Infranet Controller (IC) is configured as an IP address range instead of an IP address/netmask. See the Workaround section for more detail. The Junos OS Enforcer CLI settings are disabled by default. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D100; 15.1X49 versions prior to 15.1X49-D210; 17.3 versions prior to 17.3R2-S5, 17.3R3-S8; 17.4 versions prior to 17.4R2-S9, 17.4R3-S1; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R3-S2; 18.4 versions prior to 18.4R1-S6, 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R1-S4, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S3, 19.2R2; 19.3 versions prior to 19.3R2-S1, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2.

Mitake smart stock selection system contains a broken authentication vulnerability. By manipulating the parameters in the URL, remote attackers can gain the privileged permissions to access transaction record, and fraudulent trading without login.

WebAuthn4J Spring Security provides Web Authentication specification support for Spring applications. Affected versions are subject to improper signature counter value handling. A flaw was found in webauthn4j-spring-security-core. When an authneticator returns an incremented signature counter value during authentication, webauthn4j-spring-security-core does not properly persist the value, which means cloned authenticator detection does not work. An attacker who cloned valid authenticator in some way can use the cloned authenticator without being detected. This issue has been addressed in version `0.9.1.RELEASE`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

IBM Cloud Pak Foundational Services Identity Provider (idP) API (IBM Cloud Pak for Automation 18.0.0, 18.0.1, 18.0.2, 19.0.1, 19.0.2, 19.0.3, 20.0.1, 20.0.2, 20.0.3, 21.0.1, 21.0.2, 21.0.3, 22.0.1, and 22.0.2) allows CRUD Operations with an invalid token. This could allow an unauthenticated attacker to view, update, delete or create an IdP configuration. IBM X-Force ID: 261130.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, an unauthenticated user can use the "local port forwarding" and "dynamic port forwarding" (SOCKS proxy) functionalities. Remote attackers without credentials can exploit this bug to access local services or forward traffic through the device if SSH is enabled in the system settings.

Navidrome is an open source web-based music collection server and streamer. Starting in version 0.52.0 and prior to version 0.54.5, in certain Subsonic API endpoints, a flaw in the authentication check process allows an attacker to specify any arbitrary username that does not exist on the system, along with a salted hash of an empty password. Under these conditions, Navidrome treats the request as authenticated, granting access to various Subsonic endpoints without requiring valid credentials. An attacker can use any non-existent username to bypass the authentication system and gain access to various read-only data in Navidrome, such as user playlists. However, any attempt to modify data fails with a "permission denied" error due to insufficient permissions, limiting the impact to unauthorized viewing of information. Version 0.54.5 contains a patch for this issue.

An issue in the /usr/local/bin/jncs.sh script of Gefen WebFWC (In AV over IP products) v1.85h, v1.86v, and v1.70 allows attackers with network access to connect to the device over TCP port 4444 without authentication and execute arbitrary commands with root privileges.

Mattermost fails to invalidate previously generated password reset tokens when a new reset token was created.

Windows 7 is vulnerable to a full blind TCP/IP hijacking attack. The vulnerability exists in Windows 7 (any Windows until Windows 8) and in any implementation of TCP/IP, which is vulnerable to the Idle scan attack (including many IoT devices). NOTE: The vendor considers this a low severity issue.

Knowage is an open source analytics and business intelligence suite. Starting in version 6.0.0 and prior to version 8.1.8, an attacker can register and activate their account without having to click on the link included in the email, allowing them access to the application as a normal user. This issue has been patched in version 8.1.8.

There is an insufficient authentication vulnerability in some Huawei band products. Successful exploit could allow the attacker to spoof then connect to the band.

A vulnerability was found in Quay, which allows successful authentication even when a truncated password version is provided. This flaw affects the authentication mechanism, reducing the overall security of password enforcement.  While the risk is relatively low due to the typical length of the passwords used (73 characters), this vulnerability can still be exploited to reduce the complexity of brute-force or password-guessing attacks. The truncation of passwords weakens the overall authentication process, thereby reducing the effectiveness of password policies and potentially increasing the risk of unauthorized access in the future.

The PixelYourSite – Your smart PIXEL (TAG) & API Manager and the PixelYourSite PRO plugins for WordPress are vulnerable to Sensitive Information Exposure in all versions up to, and including, 9.7.1 and 10.4.2, respectively, through publicly exposed log files. This makes it possible for unauthenticated attackers to view potentially sensitive information contained in the exposed log files, and to delete log files.

Host name validation for TLS certificates is bypassed when the installed OpenEdge default certificates are used to perform the TLS handshake for a networked connection.  This has been corrected so that default certificates are no longer capable of overriding host name validation and will need to be replaced where full TLS certificate validation is needed for network security.  The existing certificates should be replaced with CA-signed certificates from a recognized certificate authority that contain the necessary information to support host name validation.

This vulnerability allows unauthenticated remote attackers to bypass authentication and gain partial data access to the vulnerable Trellix IPS Manager with garbage data in response mostly

Versions of the package asyncua before 0.9.96 are vulnerable to Improper Authentication such that it is possible to access Address Space without encryption and authentication. **Note:** This issue is a result of missing checks for services that require an active session.

Vert.x STOMP is a vert.x implementation of the STOMP specification that provides a STOMP server and client. From versions 3.1.0 until 3.9.16 and 4.0.0 until 4.4.2, a Vert.x STOMP server processes client STOMP frames without checking that the client send an initial CONNECT frame replied with a successful CONNECTED frame. The client can subscribe to a destination or publish message without prior authentication. Any Vert.x STOMP server configured with an authentication handler is impacted. The issue is patched in Vert.x 3.9.16 and 4.4.2. There are no trivial workarounds.

Improper access control in Citrix ADC and Citrix Gateway versions before 13.0-58.30, 12.1-57.18, 12.0-63.21, 11.1-64.14 and 10.5-70.18 and Citrix SDWAN WAN-OP versions before 11.1.1a, 11.0.3d and 10.2.7 allows unauthenticated access to certain URL endpoints.

An improper authorization vulnerability exists in Rocket.Chat <6.0 that could allow a hacker to manipulate the rid parameter and change the updateMessage method that only checks whether the user is allowed to edit message in the target room.

Ghost is a Node.js content management system. Improper authentication on some endpoints used for member actions would allow an attacker to perform member-only actions, and read member information. This security vulnerability is present in Ghost v4.46.0-v5.89.4. v5.89.5 contains a fix for this issue.

The authfile directive in the booth config file is ignored, preventing use of authentication in communications from node to node. As a result, nodes that do not have the correct authentication key are not prevented from communicating with other nodes in the cluster.

The logic in place to facilitate the update process via the user interface lacks access control to verify if permission exists to perform the tasks. Prior to this patch being applied it might be possible for an attacker to access the Mautic version number or to execute parts of the upgrade process without permission. As upgrading in the user interface is deprecated, this functionality is no longer required.

An Improper Authentication vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause an impact on confidentiality or integrity. A vulnerability in the processing of TCP-AO will allow a BGP or LDP peer not configured with authentication to establish a session even if the peer is locally configured to use authentication. This could lead to untrusted or unauthorized sessions being established. This issue affects Juniper Networks Junos OS: 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R2-S2, 21.3R3; 21.4 versions prior to 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R1-S1, 22.1R2. This issue does not affect Juniper Networks Junos OS Evolved.

A vulnerability classified as critical was found in Telecommunication Software SAMwin Contact Center Suite 5.1. This vulnerability affects the function passwordScramble in the library SAMwinLIBVB.dll of the component Password Handler. Incorrect implementation of a hashing function leads to predictable authentication possibilities. Upgrading to version 6.2 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability was found in libssh, where the authentication check of the connecting client can be bypassed in the`pki_verify_data_signature` function in memory allocation problems. This issue may happen if there is insufficient memory or the memory usage is limited. The problem is caused by the return value `rc,` which is initialized to SSH_ERROR and later rewritten to save the return value of the function call `pki_key_check_hash_compatible.` The value of the variable is not changed between this point and the cryptographic verification. Therefore any error between them calls `goto error` returning SSH_OK.

PaperCut NG allows for unauthenticated XMLRPC commands to be run by default. Versions 22.0.12 and below are confirmed to be affected, but later versions may also be affected due to lack of a vendor supplied patch.