PowerCMS XMLRPC API of PowerCMS 5.19 and earlier, PowerCMS 4.49 and earlier, PowerCMS 3.295 and earlier, and PowerCMS 2 Series (End-of-Life, EOL) allows a remote attacker to execute an arbitrary OS command via unspecified vectors.

TOTOLINK N600R V4.3.0cu.7647_B20210106 was discovered to contain a command injection vulnerability via the pin parameter in the setWiFiWpsConfig function.

The application login page in AKIPS Network Monitor 15.37 through 16.5 allows a remote unauthenticated attacker to execute arbitrary OS commands via shell metacharacters in the username parameter (a failed login attempt returns the command-injection output to a limited login failure field). This is fixed in 16.6.

An OS command injection vulnerability exists in Russound MBX-PRE-D67F firmware version 3.1.6, allowing unauthenticated attackers to execute arbitrary commands as root via crafted input to the hostname parameter in network configuration requests. This vulnerability stems from improper neutralization of special elements used in an OS command within the network configuration handler, enabling remote code execution with the highest privileges.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

AutoGPT, a component of significant-gravitas/autogpt, is vulnerable to an improper neutralization of special elements used in an OS command ('OS Command Injection') due to a flaw in its shell command validation function. Specifically, the vulnerability exists in versions v0.5.0 up to but not including 5.1.0. The issue arises from the application's method of validating shell commands against an allowlist or denylist, where it only checks the first word of the command. This allows an attacker to bypass the intended restrictions by crafting commands that are executed despite not being on the allowlist or by including malicious commands not present in the denylist. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary shell commands.

The npm module "shell-quote" 1.6.0 and earlier cannot correctly escape ">" and "<" operator used for redirection in shell. Applications that depend on shell-quote may also be vulnerable. A malicious user could perform code injection.

Loomio version 2.22.0 allows executing arbitrary commands on the server. This is possible because the application is vulnerable to OS Command Injection.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

WeGIA is a web manager for charitable institutions. Prior to version 3.4.2, an OS Command Injection vulnerability was identified in the /html/configuracao/debug_info.php endpoint. The branch parameter is not properly sanitized before being concatenated and executed in a shell command on the server's operating system. This flaw allows an unauthenticated attacker to execute arbitrary commands on the server with the privileges of the web server user (www-data). This issue has been patched in version 3.4.2.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Unauthenticated remote attackers can access the system through the LoadMaster management interface, enabling arbitrary system command execution.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability was found in openBI up to 1.0.8 and classified as critical. This issue affects the function dlfile of the file /application/websocket/controller/Setting.php. The manipulation of the argument phpPath leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252473 was assigned to this vulnerability.

A vulnerability has been found in didi Super-Jacoco 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /cov/triggerUnitCover. The manipulation of the argument uuid leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

Netwrix Password Secure 9.2.0.32454 allows OS command injection.

A vulnerability in ESM 11.6.10 allows unauthenticated access to the internal Snowservice API and enables remote code execution through command injection, executed as the root user.

An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted goform/setUsbUnload request. This occurs because the "formsetUsbUnload" function executes a dosystemCmd function with untrusted input.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

The wireless router WRTM326 from SECOM does not properly validate a specific parameter. An unauthenticated remote attacker could execute arbitrary system commands by sending crafted requests.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.

A vulnerability was found in Issabel PBX 4.0.0. It has been rated as critical. This issue affects some unknown processing of the file /index.php?menu=asterisk_cli of the component Asterisk-Cli. The manipulation of the argument Command leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252251. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the PING field of the resource ping.cmd. The NTP-2 device is also affected.

Multiple ZyXEL network-attached storage (NAS) devices running firmware version 5.21 contain a pre-authentication command injection vulnerability, which may allow a remote, unauthenticated attacker to execute arbitrary code on a vulnerable device. ZyXEL NAS devices achieve authentication by using the weblogin.cgi CGI executable. This program fails to properly sanitize the username parameter that is passed to it. If the username parameter contains certain characters, it can allow command injection with the privileges of the web server that runs on the ZyXEL device. Although the web server does not run as the root user, ZyXEL devices include a setuid utility that can be leveraged to run any command with root privileges. As such, it should be assumed that exploitation of this vulnerability can lead to remote code execution with root privileges. By sending a specially-crafted HTTP POST or GET request to a vulnerable ZyXEL device, a remote, unauthenticated attacker may be able to execute arbitrary code on the device. This may happen by directly connecting to a device if it is directly exposed to an attacker. However, there are ways to trigger such crafted requests even if an attacker does not have direct connectivity to a vulnerable devices. For example, simply visiting a website can result in the compromise of any ZyXEL device that is reachable from the client system. Affected products include: NAS326 before firmware V5.21(AAZF.7)C0 NAS520 before firmware V5.21(AASZ.3)C0 NAS540 before firmware V5.21(AATB.4)C0 NAS542 before firmware V5.21(ABAG.4)C0 ZyXEL has made firmware updates available for NAS326, NAS520, NAS540, and NAS542 devices. Affected models that are end-of-support: NSA210, NSA220, NSA220+, NSA221, NSA310, NSA310S, NSA320, NSA320S, NSA325 and NSA325v2

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the TRACE field of the resource ping.cmd. The NTP-2 device is also affected.

TimeTools SC7105 1.0.007, SC9205 1.0.007, SC9705 1.0.007, SR7110 1.0.007, SR9210 1.0.007, SR9750 1.0.007, SR9850 1.0.007, T100 1.0.003, T300 1.0.003, and T550 1.0.003 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the t3.cgi srmodel or srtime parameter.

A command injection vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2, with the improved password hashing method enabled, could allow an unauthenticated attacker to execute certain commands by providing a manipulated password.

DrayTek Vigor2960 1.3.1_Beta, Vigor3900 1.4.4_Beta, and Vigor300B 1.3.3_Beta, 1.4.2.1_Beta, and 1.4.4_Beta devices allow remote code execution as root (without authentication) via shell metacharacters to the cgi-bin/mainfunction.cgi URI. This issue has been fixed in Vigor3900/2960/300B v1.5.1.

Post Oak AWAM Bluetooth Field Device 7400v2.08.21.2018, 7800SD.2015.1.16, 2011.3, 7400v2.02.01.2019, and 7800SD.2012.12.5 is vulnerable to injections of operating system commands through timeconfig.py via shell metacharacters in the htmlNtpServer parameter.

Iteris Vantage Velocity Field Unit 2.3.1, 2.4.2, and 3.0 devices allow the injection of OS commands into cgi-bin/timeconfig.py via shell metacharacters in the NTP Server field.

This affects all versions of package ts-process-promises. The injection point is located in line 45 in main entry of package in lib/process-promises.js. The vulnerability is demonstrated with the following PoC:

HP nagios plugin for iLO (nagios-plugins-hpilo v1.50 and earlier) has a php code injection vulnerability.

install-package through 0.4.0 is vulnerable to Command Injection. It allows execution of arbitrary commands via the options argument.

gulp-styledocco through 0.0.3 allows execution of arbitrary commands. The argument 'options' of the exports function in 'index.js' can be controlled by users without any sanitization.

node-prompt-here through 1.0.1 allows execution of arbitrary commands. The "runCommand()" is called by "getDevices()" function in file "linux/manager.js", which is required by the "index. process.env.NM_CLI" in the file "linux/manager.js". This function is used to construct the argument of function "execSync()", which can be controlled by users without any sanitization.

get-git-data through 1.3.1 is vulnerable to Command Injection. It is possible to inject arbitrary commands as part of the arguments provided to get-git-data.

apiconnect-cli-plugins through 6.0.1 is vulnerable to Command Injection.It allows execution of arbitrary commands via the pluginUri argument.

All versions of chrome-launcher allow execution of arbitrary commands, by controlling the $HOME environment variable in Linux operating systems.

pomelo-monitor through 0.3.7 is vulnerable to Command Injection.It allows injection of arbitrary commands as part of 'pomelo-monitor' params.

This affects the package connection-tester before 0.2.1. The injection point is located in line 15 in index.js. The following PoC demonstrates the vulnerability:

effect through 1.0.4 is vulnerable to Command Injection. It allows execution of arbitrary command via the options argument.

diskusage-ng through 0.2.4 is vulnerable to Command Injection.It allows execution of arbitrary commands via the path argument.

pixl-class prior to 1.0.3 allows execution of arbitrary commands. The members argument of the create function can be controlled by users without any sanitization.