A flaw was found in libXpm. This issue occurs when parsing a file with a comment not closed; the end-of-file condition will not be detected, leading to an infinite loop and resulting in a Denial of Service in the application linked to the library.

A vulnerability was found in libX11. The security flaw occurs because the functions in src/InitExt.c in libX11 do not check that the values provided for the Request, Event, or Error IDs are within the bounds of the arrays that those functions write to, using those IDs as array indexes. They trust that they were called with values provided by an Xserver adhering to the bounds specified in the X11 protocol, as all X servers provided by X.Org do. As the protocol only specifies a single byte for these values, an out-of-bounds value provided by a malicious server (or a malicious proxy-in-the-middle) can only overwrite other portions of the Display structure and not write outside the bounds of the Display structure itself, possibly causing the client to crash with this memory corruption.

Format string vulnerability in the LogVHdrMessageVerb function in os/log.c in X.Org X11 1.11 allows attackers to cause a denial of service or possibly execute arbitrary code via format string specifiers in an input device name.

Multiple buffer overflows in the (1) XvQueryAdaptors and (2) XvQueryEncodings functions in X.org libXrender before 0.9.10 allow remote X servers to trigger out-of-bounds write operations via vectors involving length fields.

xorg-x11-server before 1.19.5 was missing length validation in RENDER extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 was missing length validation in XFIXES extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 was missing length validation in XINERAMA extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 was missing length validation in X-Resource extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 was missing length validation in XFree86 DRI extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 was missing length validation in XFree86 DGA extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 had wrong extra length check in ProcXIChangeHierarchy function allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 was missing extra length validation in ProcEstablishConnection function allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

X.org libXtst before 1.2.3 allows remote X servers to cause a denial of service (infinite loop) via a reply in the (1) XRecordStartOfData, (2) XRecordEndOfData, or (3) XRecordClientDied category without a client sequence and with attached data.

The GLX extension in X.Org xserver 1.7.7 allows remote authenticated users to cause a denial of service (server crash) and possibly execute arbitrary code via (1) a crafted request that triggers a client swap in glx/glxcmdsswap.c; or (2) a crafted length or (3) a negative value in the screen field in a request to glx/glxcmds.c.

An issue was discovered in XListExtensions in ListExt.c in libX11 through 1.6.5. A malicious server can send a reply in which the first string overflows, causing a variable to be set to NULL that will be freed later on, leading to DoS (segmentation fault).

xorg-x11-server before 1.19.5 was missing length validation in XFree86 VidModeExtension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 was missing length validation in MIT-SCREEN-SAVER extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

A vulnerability was found in libX11 due to an infinite loop within the PutSubImage() function. This flaw allows a local user to consume all available system resources and cause a denial of service condition.

An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.

An issue was discovered in the /api/connector endpoint handler in Yubico yubihsm-connector before 3.0.1 (in YubiHSM SDK before 2021.04). The handler did not validate the length of the request, which can lead to a state where yubihsm-connector becomes stuck in a loop waiting for the YubiHSM to send it data, preventing any further operations until the yubihsm-connector is restarted. An attacker can send 0, 1, or 2 bytes to trigger this.

Pion DTLS is a Go implementation of Datagram Transport Layer Security. Prior to version 2.1.4, an attacker can send packets that sends Pion DTLS into an infinite loop when processing. Version 2.1.4 contains a patch for this issue. There are currently no known workarounds available.

Transient DOS in Modem after RRC Setup message is received.

Oryx Embedded CycloneTCP 1.7.6 to 2.0.0, fixed in 2.0.2, is affected by incorrect input validation, which may cause a denial of service (DoS). To exploit the vulnerability, an attacker needs to have TCP connectivity to the target system. Receiving a maliciously crafted TCP packet from an unauthenticated endpoint is sufficient to trigger the bug.

node-jose is a JavaScript implementation of the JSON Object Signing and Encryption (JOSE) for web browsers and node.js-based servers. Prior to version 2.2.0, when using the non-default "fallback" crypto back-end, ECC operations in `node-jose` can trigger a Denial-of-Service (DoS) condition, due to a possible infinite loop in an internal calculation. For some ECC operations, this condition is triggered randomly; for others, it can be triggered by malicious input. The issue has been patched in version 2.2.0. Since this issue is only present in the "fallback" crypto implementation, it can be avoided by ensuring that either WebCrypto or the Node `crypto` module is available in the JS environment where `node-jose` is being run.

The web server in InterNiche NicheStack through 4.0.1 allows remote attackers to cause a denial of service (infinite loop and networking outage) via an unexpected valid HTTP request such as OPTIONS. This occurs because the HTTP request handler enters a miscoded wbs_loop() debugger hook.

Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. Versions from 0.9.0 to 0.12.0 (including) did not properly fail blocking read operations on TLS connections when the transport hit timeouts. Instead it entered an endless loop retrying the read operation, consuming CPU resources. This could be exploited for denial of service attacks. If trace level logging was enabled, it would also produce an excessive amount of log output during the loop, consuming disk space. The problem has been fixed in commit d7eec4e598158ab6a98bf505354e84352f9715ec, please update to version 0.12.1. There are no workarounds, users who cannot update should apply the errno fix detailed in the security advisory.

CVE-2024-7515 IMPACT A denial-of-service vulnerability exists in the affected products. A malformed PTP management packet can cause a major nonrecoverable fault in the controller.

The odbc_bindcols function in ext/odbc/php_odbc.c in PHP before 5.6.12 mishandles driver behavior for SQL_WVARCHAR columns, which allows remote attackers to cause a denial of service (application crash) in opportunistic circumstances by leveraging use of the odbc_fetch_array function to access a certain type of Microsoft SQL Server table.

Stack consumption vulnerability in Zend/zend_exceptions.c in PHP before 5.4.44, 5.5.x before 5.5.28, and 5.6.x before 5.6.12 allows remote attackers to cause a denial of service (segmentation fault) via recursive method calls.

A Denial-of-Service (DoS) vulnerability was discovered in F-Secure & WithSecure products whereby the aegen.dll will go into an infinite loop when unpacking PE files. This eventually leads to scanning engine crash. The exploit can be triggered remotely by an attacker.

Improper Input Validation vulnerability in Hitachi ABB Power Grids Relion 670 Series, Relion 670/650 Series, Relion 670/650/SAM600-IO, Relion 650, REB500, RTU500 Series, FOX615 (TEGO1), MSM, GMS600, PWC600 allows an attacker with access to the IEC 61850 network with knowledge of how to reproduce the attack, as well as the IP addresses of the different IEC 61850 access points (of IEDs/products), to force the device to reboot, which renders the device inoperable for approximately 60 seconds. This vulnerability affects only products with IEC 61850 interfaces. This issue affects: Hitachi ABB Power Grids Relion 670 Series 1.1; 1.2.3 versions prior to 1.2.3.20; 2.0 versions prior to 2.0.0.13; 2.1; 2.2.2 versions prior to 2.2.2.3; 2.2.3 versions prior to 2.2.3.2. Hitachi ABB Power Grids Relion 670/650 Series 2.2.0 versions prior to 2.2.0.13. Hitachi ABB Power Grids Relion 670/650/SAM600-IO 2.2.1 versions prior to 2.2.1.6. Hitachi ABB Power Grids Relion 650 1.1; 1.2; 1.3 versions prior to 1.3.0.7. Hitachi ABB Power Grids REB500 7.3; 7.4; 7.5; 7.6; 8.2; 8.3. Hitachi ABB Power Grids RTU500 Series 7.x version 7.x and prior versions; 8.x version 8.x and prior versions; 9.x version 9.x and prior versions; 10.x version 10.x and prior versions; 11.x version 11.x and prior versions; 12.x version 12.x and prior versions. Hitachi ABB Power Grids FOX615 (TEGO1) R1D02 version R1D02 and prior versions. Hitachi ABB Power Grids MSM 2.1.0 versions prior to 2.1.0. Hitachi ABB Power Grids GMS600 1.3.0 version 1.3.0 and prior versions. Hitachi ABB Power Grids PWC600 1.0 versions prior to 1.0.1.4; 1.1 versions prior to 1.1.0.1.

ansi2html is vulnerable to regular expression denial of service (ReDoS) when certain types of user input is passed in.

Netty, an asynchronous, event-driven network application framework, has a vulnerability starting in version 4.1.91.Final and prior to version 4.1.118.Final. When a special crafted packet is received via SslHandler it doesn't correctly handle validation of such a packet in all cases which can lead to a native crash. Version 4.1.118.Final contains a patch. As workaround its possible to either disable the usage of the native SSLEngine or change the code manually.

On BIG-IP Advanced WAF and BIG-IP ASM version 16.x before 16.1.0x, 15.1.x before 15.1.3.1, 14.1.x before 14.1.4.3, 13.1.x before 13.1.4.1, and all versions of 12.1.x, when a WebSocket profile is configured on a virtual server, undisclosed requests can cause bd to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CVE 2021-22681 https://www.rockwellautomation.com/en-us/trust-center/security-advisories/advisory.PN1550.html  and send a specially crafted CIP message to the device. If exploited, a threat actor could help prevent access to the legitimate user and end connections to connected devices including the workstation. To recover the controllers, a download is required which ends any process that the controller is running.

A lack of replay attack protection in Security Mode Command process prior to SMR Oct-2021 Release 1 can lead to denial of service on mobile network connection and battery depletion.

In goform/setSysTools on Tenda N301 wireless routers, attackers can trigger a device crash via a zero wanMTU value. (Prohibition of this zero value is only enforced within the GUI.)

ASQ in Stormshield Network Security (SNS) 4.3.15 before 4.3.16 and 4.6.x before 4.6.3 allows a crash when analysing a crafted SIP packet.

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus ReadyStart V4 (All versions < V4.1.0), Nucleus Source Code (All versions including affected IPv6 stack). The function that processes the Hop-by-Hop extension header in IPv6 packets and its options lacks any checks against the length field of the header, allowing attackers to put the function into an infinite loop by supplying arbitrary length values.

The Stars Rating WordPress plugin before 3.5.1 does not validate the submitted rating, allowing submission of long integer, causing a Denial of Service in the comments section, or pending comment dashboard depending if the user sent it as unauthenticated or authenticated.

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus ReadyStart V4 (All versions < V4.1.0), Nucleus Source Code (All versions including affected IPv6 stack). The function that processes IPv6 headers does not check the lengths of extension header options, allowing attackers to put this function into an infinite loop with crafted length values.

An issue was discovered in Joomla! 2.5.0 through 3.9.27. Missing validation of input could lead to a broken usergroups table.

Yandex Browser Lite for Android prior to version 21.1.0 allows remote attackers to cause a denial of service.

An issue was discovered on Xiaomi DGNWG03LM, ZNCZ03LM, MCCGQ01LM, WSDCGQ01LM, RTCGQ01LM devices. Attackers can use the ZigBee trust center rejoin procedure to perform mutiple denial of service attacks.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A malicious actor can send a IEEE 802.15.4 packet with spoofed length byte and optionally spoofed FCS, which eventually results into an endless loop on a CC2538 as receiver. Before PR #20998, the receiver would check for the location of the CRC bit using the packet length byte by considering all 8 bits, instead of discarding bit 7, which is what the radio does. This then results into reading outside of the RX FIFO. Although it prints an error when attempting to read outside of the RX FIFO, it will continue doing this. This may lead to a discrepancy in the CRC check according to the firmware and the radio. If the CPU judges the CRC as correct and the radio is set to `AUTO_ACK`, when the packet requests and acknowledgment the CPU will go into the state `CC2538_STATE_TX_ACK`. However, if the radio judged the CRC as incorrect, it will not send an acknowledgment, and thus the `TXACKDONE` event will not fire. It will then never return to the state `CC2538_STATE_READY` since the baseband processing is still disabled. Then the CPU will be in an endless loop. Since setting to idle is not forced, it won't do it if the radio's state is not `CC2538_STATE_READY`. A fix has not yet been made.

Ericsson Packet Core Controller (PCC) contains a vulnerability where an attacker sending a large volume of specially crafted messages may cause service degradation

RIOT is an operating system for internet of things (IoT) devices. In version 2024.04 and prior, the function `_parse_advertise`, located in `/sys/net/application_layer/dhcpv6/client.c`, has no minimum header length check for `dhcpv6_opt_t` after processing `dhcpv6_msg_t`. This omission could lead to an out-of-bound read, causing system inconsistency. Additionally, the same lack of a header length check is present in the function `_preparse_advertise`, which is called by `_parse_advertise` before handling the request. As of time of publication, no known patched version exists.

The package jpeg-js before 0.4.4 are vulnerable to Denial of Service (DoS) where a particular piece of input will cause to enter an infinite loop and never return.