In MB connect line mymbCONNECT24, mbCONNECT24 in versions <= 2.8.0 an unauthenticated user can enumerate valid users by checking what kind of response the server sends.

The Change WP Admin Login WordPress plugin before 1.1.4 discloses the URL of the hidden login page when accessing a crafted URL, bypassing the protection offered.

User enumeration is found in in PHPJabbers Appointment Scheduler 3.0. This issue occurs during password recovery, where a difference in messages could allow an attacker to determine if the user is valid or not, enabling a brute force attack with valid users.

An issue was discovered in Ujcms v6.0.2 allows attackers to gain sensitive information via the dir parameter to /api/backend/core/web-file-html/download-zip.

IBM GSKit-Crypto could allow a remote attacker to obtain sensitive information, caused by a timing-based side channel in the RSA Decryption implementation. By sending an overly large number of trial messages for decryption, an attacker could exploit this vulnerability to obtain sensitive information.

SENAYAN Library Management System (SLiMS) Bulian v9.5.2 does not strip exif data from uploaded images. This allows attackers to obtain information such as the user's geolocation and device information.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the NetWorker Client execution service (nsrexecd) irrespective of any auth used.

Certain HP Enterprise LaserJet and HP LaserJet Managed Printers are potentially vulnerable to information disclosure when IPsec is enabled with FutureSmart version 5.6.

In mymbCONNECT24, mbCONNECT24 <= 2.9.0 an unauthenticated user can enumerate valid backend users by checking what kind of response the server sends for crafted invalid login attempts.

H3C SSL VPN contains a user enumeration vulnerability that allows attackers to identify valid usernames through the 'txtUsrName' POST parameter. Attackers can submit different usernames to the login_submit.cgi endpoint and analyze response messages to distinguish between existing and non-existing accounts.

Allowing RTT frames to be linked with non randomized MAC address by comparing the sequence numbers can lead to information disclosure. in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking

wolfSSL 4.3.0 has mulmod code in wc_ecc_mulmod_ex in ecc.c that does not properly resist timing side-channel attacks.

Observable timing discrepancy issue exists in IPCOM EX2 Series V01L02NF0001 to V01L06NF0401, V01L20NF0001 to V01L20NF0401, V02L20NF0001 to V02L21NF0301, and IPCOM VE2 Series V01L04NF0001 to V01L06NF0112. If this vulnerability is exploited, some of the encrypted communication may be decrypted by an attacker who can obtain the contents of the communication.

An issue in Sourcebans++ before v.1.8.0 allows a remote attacker to obtain sensitive information via a crafted XAJAX call to the Forgot Password function.

An issue was discovered in zzcms 8.2. It allows PHP code injection via the siteurl parameter to install/index.php, as demonstrated by injecting a phpinfo() call into /inc/config.php.

IBM Storage Defender - Resiliency Service 2.0.0 through 2.0.4 agent username and password error response discrepancy exposes product to brute force enumeration. IBM X-Force ID: 294869.

Matrix Tafnit v8 - CWE-204: Observable Response Discrepancy

The Extensive VC Addons for WPBakery page builder WordPress plugin before 1.9.1 does not validate a parameter passed to the php extract function when loading templates, allowing an unauthenticated attacker to override the template path to read arbitrary files from the hosts file system. This may be escalated to RCE using PHP filter chains.

The Kyber reference implementation before 9b8d306, when compiled by LLVM Clang through 18.x with some common optimization options, has a timing side channel that allows attackers to recover an ML-KEM 512 secret key in minutes. This occurs because poly_frommsg in poly.c does not prevent Clang from emitting a vulnerable secret-dependent branch.

ECDSA/EC/Point.pm in Crypt::Perl before 0.33 does not properly consider timing attacks against the EC point multiplication algorithm.

A vulnerability was reported in the Lenovo Browser Mobile and Lenovo Browser HD Apps for Android that could allow an attacker to craft a payload that could result in the disclosure of sensitive information.

RSA BSAFE Crypto-C Micro Edition, versions prior to 4.0.5.3 (in 4.0.x) and versions prior to 4.1.3.3 (in 4.1.x), and RSA Micro Edition Suite, versions prior to 4.0.11 (in 4.0.x) versions prior to 4.1.6.1 (in 4.1.x) and versions prior to 4.3.3 (4.2.x and 4.3.x) are vulnerable to an Information Exposure Through Timing Discrepancy. A malicious remote user could potentially exploit this vulnerability to extract information leaving data at risk of exposure.

A flaw was found in m2crypto. This issue may allow a remote attacker to decrypt captured messages in TLS servers that use RSA key exchanges, which may lead to exposure of confidential or sensitive data.

A Server Side Template Injection (SSTI) was discovered in the SEOmatic plugin before 3.1.4 for Craft CMS, because requests that don't match any elements incorrectly generate the canonicalUrl, and can lead to execution of Twig code.

Before Go 1.20, the RSA based TLS key exchanges used the math/big library, which is not constant time. RSA blinding was applied to prevent timing attacks, but analysis shows this may not have been fully effective. In particular it appears as if the removal of PKCS#1 padding may leak timing information, which in turn could be used to recover session key bits. In Go 1.20, the crypto/tls library switched to a fully constant time RSA implementation, which we do not believe exhibits any timing side channels.

A vulnerability classified as problematic was found in Ziftr primecoin up to 0.8.4rc1. Affected by this vulnerability is the function HTTPAuthorized of the file src/bitcoinrpc.cpp. The manipulation of the argument strUserPass/strRPCUserColonPass leads to observable timing discrepancy. The complexity of an attack is rather high. The exploitation appears to be difficult. Upgrading to version 0.8.4rc2 is able to address this issue. The patch is named cdb3441b5cd2c1bae49fae671dc4a496f7c96322. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-217171.

A vulnerability classified as problematic has been found in Rotem Dynamics Rotem CRM up to 20230729. This affects an unknown part of the file /LandingPages/api/otp/send?id=[ID][ampersand]method=sms of the component OTP URI Interface. The manipulation leads to information exposure through discrepancy. It is possible to initiate the attack remotely. The identifier VDB-233253 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Macrovideo v380pro v1.4.97 shares the device id and password when sharing the device.

IBM GSKit could allow a remote attacker to obtain sensitive information, caused by a timing-based side channel in the RSA Decryption implementation. By sending an overly large number of trial messages for decryption, an attacker could exploit this vulnerability to obtain sensitive information. IBM X-Force ID: 255828.

The sensitive information exposure vulnerability in the CGI “Export_Log” and the binary “zcmd” in Zyxel DX5401-B0 firmware versions prior to V5.17(ABYO.1)C0 could allow a remote unauthenticated attacker to read the system files and to retrieve the password of the supervisor from the encrypted file.

TrevorC2 v1.1/v1.2 fails to prevent fingerprinting primarily via a discrepancy between response headers when responding to different HTTP methods, also via predictible responses when accessing and interacting with the "SITE_PATH_QUERY".

Draytek devices Vigor 165/166 prior to v4.2.6 , Vigor 2620/LTE200 prior to v3.9.8.8, Vigor 2860/2925 prior to v3.9.7, Vigor 2862/2926 prior to v3.9.9.4, Vigor 2133/2762/2832 prior to v3.9.8, Vigor 2135/2765/2766 prior to v4.4.5.1, Vigor 2865/2866/2927 prior to v4.4.5.3, Vigor 2962/3910 prior to v4.3.2.7, Vigor 3912 prior to v4.3.5.2, and Vigor 2925 up to v3.9.6 were discovered to utilize insecure versions of the functions strcmp and memcmp, allowing attackers to possibly obtain sensitive information via timing attacks.

IBM Spectrum Virtualize 8.5, under certain circumstances, could disclose sensitive credential information while a download from Fix Central is in progress. IBM X-Force ID: 249518.

An issue was discovered in MCUBO ICT through 10.12.4 (aka 6.0.2). An Observable Response Discrepancy can occur under the login web page. In particular, the web application provides different responses to incoming requests in a way that reveals internal state information to an unauthorized actor. That allow an unauthorized actor to perform User Enumeration attacks.

io.finnet tss-lib before 2.0.0 can leak the lambda value of a private key via a timing side-channel attack because it relies on Go big.Int, which is not constant time for Cmp, modular exponentiation, or modular inverse. An example leak is in crypto/paillier/paillier.go. (bnb-chain/tss-lib and thorchain/tss are also affected.)

An issue in MyPrestaModules ordersexport v.6.0.2 and before allows a remote attacker to execute arbitrary code via the download.php component.

oauth2-server (aka node-oauth2-server) through 3.1.1 implements OAuth 2.0 without PKCE. It does not prevent authorization code injection. This is similar to CVE-2020-7692. NOTE: the vendor states 'As RFC7636 is an extension, I think the claim in the Readme of "RFC 6749 compliant" is valid and not misleading and I also therefore wouldn't describe this as a "vulnerability" with the library per se.

CasaOS-UserService provides user management functionalities to CasaOS. Starting in version 0.4.4.3 and prior to version 0.4.7, the Casa OS Login page disclosed the username enumeration vulnerability in the login page. An attacker can enumerate the CasaOS username using the application response. If the username is incorrect application gives the error `**User does not exist**`. If the password is incorrect application gives the error `**Invalid password**`. Version 0.4.7 fixes this issue.

An issue in Teamwire Windows desktop client v.2.0.1 through v.2.4.0 allows a remote attacker to obtain sensitive information via a crafted payload to the message function.

This High severity Remote Code Execution (RCE) vulnerability was introduced in version 7.13.0 of Confluence Data Center and Server. Remote Code Execution (RCE) vulnerability, with a CVSS Score of 8.6 and a CVSS Vector of CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:N allows an unauthenticated attacker to expose assets in your environment susceptible to exploitation which has high impact to confidentiality, no impact to integrity, no impact to availability, and does not require user interaction. Atlassian recommends that Confluence Data Center and Server customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: * Confluence Data Center and Server 7.19: Upgrade to a release 7.19.18, or any higher 7.19.x release * Confluence Data Center and Server 8.5: Upgrade to a release 8.5.5 or any higher 8.5.x release * Confluence Data Center and Server 8.7: Upgrade to a release 8.7.2 or any higher release See the release notes (https://confluence.atlassian.com/doc/confluence-release-notes-327.html ). You can download the latest version of Confluence Data Center and Server from the download center (https://www.atlassian.com/software/confluence/download-archives ).

TP-Link routers, Archer C5 and WR710N-V1, using the latest software, the strcmp function used for checking credentials in httpd, is susceptible to a side-channel attack. By measuring the response time of the httpd process, an attacker could guess each byte of the username and password.

The Clerk WordPress plugin before 4.0.0 is affected by time-based attacks in the validation function for all API requests due to the usage of comparison operators to verify API keys against the ones stored in the site options.

@fastify/bearer-auth is a Fastify plugin to require bearer Authorization headers. @fastify/bearer-auth prior to versions 7.0.2 and 8.0.1 does not securely use crypto.timingSafeEqual. A malicious attacker could estimate the length of one valid bearer token. According to the corresponding RFC 6750, the bearer token has only base64 valid characters, reducing the range of characters for a brute force attack. Version 7.0.2 and 8.0.1 of @fastify/bearer-auth contain a patch. There are currently no known workarounds. The package fastify-bearer-auth, which covers versions 6.0.3 and prior, is also vulnerable starting at version 5.0.1. Users of fastify-bearer-auth should upgrade to a patched version of @fastify/bearer-auth.