An issue was discovered in the fp_newsletter (aka Newsletter subscriber management) extension before 1.1.1, 1.2.0, 2.x before 2.1.2, 2.2.1 through 2.4.0, and 3.x before 3.2.6 for TYPO3. Data about subscribers may be obtained via unsubscribeAction operations.

An issue was discovered in the fp_newsletter (aka Newsletter subscriber management) extension before 1.1.1, 1.2.0, 2.x before 2.1.2, 2.2.1 through 2.4.0, and 3.x before 3.2.6 for TYPO3. Data about subscribers may be obtained via createAction operations.

An issue was discovered in the fp_newsletter (aka Newsletter subscriber management) extension before 1.1.1, 1.2.0, 2.x before 2.1.2, 2.2.1 through 2.4.0, and 3.x before 3.2.6 for TYPO3. Attackers can unsubscribe everyone via a series of modified subscription UIDs in deleteAction operations.

A vulnerability in the request authentication validation for the REST API of Cisco SD-WAN vManage software could allow an unauthenticated, remote attacker to gain read permissions or limited write permissions to the configuration of an affected Cisco SD-WAN vManage instance. This vulnerability is due to insufficient request validation when using the REST API feature. An attacker could exploit this vulnerability by sending a crafted API request to an affected vManage instance. A successful exploit could allow the attacker to retrieve information from and send information to the configuration of the affected Cisco vManage instance. This vulnerability only affects the REST API and does not affect the web-based management interface or the CLI.

Flask-AppBuilder is an application development framework, built on top of Flask. When Flask-AppBuilder is set to AUTH_TYPE AUTH_OID, it allows an attacker to forge an HTTP request, that could deceive the backend into using any requested OpenID service. This vulnerability could grant an attacker unauthorised privilege access if a custom OpenID service is deployed by the attacker and accessible by the backend. This vulnerability is only exploitable when the application is using the OpenID 2.0 authorization protocol. Upgrade to Flask-AppBuilder 4.3.11 to fix the vulnerability.

An authentication issue was addressed with improved state management. This issue is fixed in macOS Sonoma 14.4, iOS 17.4 and iPadOS 17.4. Photos in the Hidden Photos Album may be viewed without authentication.

A vulnerability has been identified in armeria-saml versions less than 1.27.2, allowing the use of malicious SAML messages to bypass authentication. All users who rely on armeria-saml older than version 1.27.2 must upgrade to 1.27.2 or later.

CryptPad is a collaboration suite. Prior to version 2025.3.0, enforcement of Two-Factor Authentication (2FA) in CryptPad can be trivially bypassed, due to weak implementation of access controls. An attacker that compromises a user's credentials can gain access to the victim's account, even if the victim has 2FA set up. This is due to 2FA not being enforced if the path parameter is not 44 characters long, which can be bypassed by simply URL encoding a single character in the path. This issue has been patched in version 2025.3.0.

Focus was incorrectly allowing internal links to utilize the app scheme used for deeplinking, which could result in links potentially circumventing some URL safety checks This vulnerability affects Focus for iOS < 132.

The vulnerability exists in ADiTaaS (Allied Digital Integrated Tool-as-a-Service) version 5.1 due to an improper authentication vulnerability in the ADiTaaS backend API. An unauthenticated remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable platform. Successful exploitation of this vulnerability could allow the attacker to gain full access to the customers’ data and completely compromise the targeted platform.

Auth0-PHP provides the PHP SDK for Auth0 Authentication and Management APIs. Starting in version 8.0.0-BETA1 and prior to version 8.14.0, session cookies of applications using the Auth0-PHP SDK configured with CookieStore have authentication tags that can be brute forced, which may result in unauthorized access. Certain pre-conditions are required to be vulnerable to this issue: Applications using the Auth0-PHP SDK, or the Auth0/symfony, Auth0/laravel-auth0, and Auth0/wordpress SDKs that rely on the Auth0-PHP SDK; and session storage configured with CookieStore. Upgrade Auth0/Auth0-PHP to v8.14.0 to receive a patch. As an additional precautionary measure, rotating cookie encryption keys is recommended. Note that once updated, any previous session cookies will be rejected.

An Improper Authentication vulnerability in Korenix JetNet TFTP allows abuse of this service. This issue affects JetNet devices older than firmware version 2024/01.

Zoho ManageEngine Desktop Central before build 10.0.647 allows a single authentication secret from multiple agents to communicate with the server.

octobercms in a CMS platform based on the Laravel PHP Framework. In affected versions of the october/system package an attacker can request an account password reset and then gain access to the account using a specially crafted request. The issue has been patched in Build 472 and v1.1.5.

An Incorrect Access Control vulnerability has been identified in Citrix XenMobile Server 10.8.0 before Rolling Patch 6 and 10.9.0 before Rolling Patch 3. An attacker can impersonate and take actions on behalf of any Mobile Application Management (MAM) enrolled device.

Improper Authentication vulnerability in Mitsubishi Electric Corporation MELSEC-F Series main modules allows a remote unauthenticated attacker to obtain sequence programs from the product or write malicious sequence programs or improper data in the product without authentication by sending illegitimate messages.

In VeridiumID before 3.5.0, the WebAuthn API allows an internal unauthenticated attacker (who can pass enrollment verifications and is allowed to enroll a FIDO key) to register their FIDO authenticator to a victim’s account and consequently take over the account.

Cryptographic issue while performing attach with a LTE network, a rogue base station can skip the authentication phase and immediately send the Security Mode Command.

Sensitive information disclosure and manipulation due to improper authentication. The following products are affected: Acronis Cyber Protect 15 (Linux, macOS, Windows) before build 35979.

Authentication bypass vulnerability in portal/account/register.php in versions of OpenEMR before 5.0.1.4 allows a remote attacker to access (1) portal/add_edit_event_user.php, (2) portal/find_appt_popup_user.php, (3) portal/get_allergies.php, (4) portal/get_amendments.php, (5) portal/get_lab_results.php, (6) portal/get_medications.php, (7) portal/get_patient_documents.php, (8) portal/get_problems.php, (9) portal/get_profile.php, (10) portal/portal_payment.php, (11) portal/messaging/messages.php, (12) portal/messaging/secure_chat.php, (13) portal/report/pat_ledger.php, (14) portal/report/portal_custom_report.php, or (15) portal/report/portal_patient_report.php without authenticating as a patient.

EmpowerID before 7.205.0.1 allows an attacker to bypass an MFA (multi factor authentication) requirement if the first factor (username and password) is known, because the first factor is sufficient to change an account's email address, and the product would then send MFA codes to the new email address (which may be attacker-controlled). NOTE: this is different from CVE-2023-4177, which claims to be about "some unknown processing of the component Multi-Factor Authentication Code Handler" and thus cannot be correlated with other vulnerability information.

An issue was discovered on the Forvia Hella HELLA Driving Recorder DR 820. Bypassing of Device Pairing can occur. The pairing mechanism relies solely on the connecting device's MAC address. By obtaining the MAC address through network scanning and spoofing it, an attacker can bypass the authentication process and gain full access to the dashcam's features without proper authorization.

A Two-Factor Authentication Bypass Vulnerability exists in BS-Client Private Client 2.4 and 2.5 via an XML request that neglects the use of ADPswID and AD parameters, which could let a malicious user access privileged function.

SPID.AspNetCore.Authentication is an AspNetCore Remote Authenticator for SPID. Authentication using Spid and CIE is based on the SAML2 standard which provides two entities: Identity Provider (IDP): the system that authenticates users and provides identity information (SAML affirmation) to the Service Provider, in essence, is responsible for the management of the credentials and identity of users; Service Provider (SP): the system that provides a service to the user and relies on the Identity Provider to authenticate the user, receives SAML assertions from the IdP to grant access to resources. The validation logic of the signature is central as it ensures that you cannot create a SAML response with arbitrary assertions and then impersonate other users. There is no guarantee that the first signature refers to the root object, it follows that if an attacker injects an item signed as the first element, all other signatures will not be verified. The only requirement is to have an XML element legitimately signed by the IdP, a condition that is easily met using the IdP's public metadata. An attacker could create an arbitrary SAML response that would be accepted by SPs using vulnerable SDKs, allowing him to impersonate any Spid and/or CIE user. This vulnerability has been addressed in version 3.4.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

CIE.AspNetCore.Authentication is an AspNetCore Remote Authenticator for CIE 3.0. Authentication using Spid and CIE is based on the SAML2 standard which provides two entities: 1. Identity Provider (IDP): the system that authenticates users and provides identity information (SAML affirmation) to the Service Provider, in essence, is responsible for the management of the credentials and identity of users; 2. Service Provider (SP): the system that provides a service to the user and relies on the Identity Provider to authenticate the user, receives SAML assertions from the IdP to grant access to resources. The library cie-aspnetcore refers to the second entity, the SP, and implements the validation logic of SAML assertions within SAML responses. In affected versions there is no guarantee that the first signature refers to the root object, it follows that if an attacker injects an item signed as the first element, all other signatures will not be verified. The only requirement is to have an XML element legitimately signed by the IdP, a condition that is easily met using the IdP's public metadata. An attacker could create an arbitrary SAML response that would be accepted by SPs using vulnerable SDKs, allowing him to impersonate any Spid and/or CIE user. This issue has been addressed in version 2.1.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Session fixation vulnerability in SpaceTag LacoodaST 2.1.3 and earlier allows remote attackers to hijack web sessions via unspecified vectors.

A Missing Authentication in Critical Function in Bosch IP cameras allows an unauthenticated remote attacker to extract sensitive information or change settings of the camera by sending crafted requests to the device. Only devices of the CPP6, CPP7 and CPP7.3 family with firmware 7.70, 7.72, and 7.80 prior to B128 are affected by this vulnerability. Versions 7.62 or lower and INTEOX cameras are not affected.

Sentry is a developer-first error tracking and performance monitoring tool. A critical vulnerability was discovered in the SAML SSO implementation of Sentry. It was reported to us via our private bug bounty program. The vulnerability allows an attacker to take over any user account by using a malicious SAML Identity Provider and another organization on the same Sentry instance. The victim email address must be known in order to exploit this vulnerability. The Sentry SaaS fix was deployed on Jan 14, 2025. For self hosted users; if only a single organization is allowed `(SENTRY_SINGLE_ORGANIZATION = True)`, then no action is needed. Otherwise, users should upgrade to version 25.1.0 or higher. There are no known workarounds for this vulnerability.

VMware Carbon Black Cloud Workload appliance 1.0.0 and 1.01 has an authentication bypass vulnerability that may allow a malicious actor with network access to the administrative interface of the VMware Carbon Black Cloud Workload appliance to obtain a valid authentication token. Successful exploitation of this issue would result in the attacker being able to view and alter administrative configuration settings.

PrestaShop is a fully scalable open source e-commerce solution. In PrestaShop before version 1.7.2 the soft logout system is not complete and an attacker is able to foreign request and executes customer commands. The problem is fixed in 1.7.7.2

WordPress Portable phpMyAdmin Plugin 1.4.1 has Multiple Security Bypass Vulnerabilities

Cryptographic issue occurs due to use of insecure connection method while downloading.

WordPress Portable phpMyAdmin Plugin has an authentication bypass vulnerability

An issue in OXHOO TP50 OXH1.50 allows unauthenticated attackers to access the administrative panel via browsing to the URL http://device_ip/index1.html.

PTZOptics PT30X-SDI/NDI-xx before firmware 6.3.40 is vulnerable to an insufficient authentication issue. The camera does not properly enforce authentication to /cgi-bin/param.cgi when requests are sent without an HTTP Authorization header. The result is a remote and unauthenticated attacker can leak sensitive data such as usernames, password hashes, and configurations details. Additionally, the attacker can update individual configuration values or overwrite the whole file.

Cryptographic issue in GPS HLOS Driver while downloading Qualcomm GNSS assistance data.

Improper Authentication vulnerability in Progress MOVEit Transfer (SFTP module) can lead to Authentication Bypass.This issue affects MOVEit Transfer: from 2023.0.0 before 2023.0.11, from 2023.1.0 before 2023.1.6, from 2024.0.0 before 2024.0.2.

Improper Authentication vulnerability in Progress MOVEit Gateway (SFTP modules) allows Authentication Bypass.This issue affects MOVEit Gateway: 2024.0.0.