In the Linux kernel, the following vulnerability has been resolved: s390/dasd: protect device queue against concurrent access In dasd_profile_start() the amount of requests on the device queue are counted. The access to the device queue is unprotected against concurrent access. With a lot of parallel I/O, especially with alias devices enabled, the device queue can change while dasd_profile_start() is accessing the queue. In the worst case this leads to a kernel panic due to incorrect pointer accesses. Fix this by taking the device lock before accessing the queue and counting the requests. Additionally the check for a valid profile data pointer can be done earlier to avoid unnecessary locking in a hot path.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix NULL pointer dereference in zone registration error path If device_register() in thermal_zone_device_register_with_trips() returns an error, the tz variable is set to NULL and subsequently dereferenced in kfree(tz->tzp). Commit adc8749b150c ("thermal/drivers/core: Use put_device() if device_register() fails") added the tz = NULL assignment in question to avoid a possible double-free after dropping the reference to the zone device. However, after commit 4649620d9404 ("thermal: core: Make thermal_zone_device_unregister() return after freeing the zone"), that assignment has become redundant, because dropping the reference to the zone device does not cause the zone object to be freed any more. Drop it to address the NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length If the host sends an H2CData command with an invalid DATAL, the kernel may crash in nvmet_tcp_build_pdu_iovec(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp] Call trace: process_one_work+0x174/0x3c8 worker_thread+0x2d0/0x3e8 kthread+0x104/0x110 Fix the bug by raising a fatal error if DATAL isn't coherent with the packet size. Also, the PDU length should never exceed the MAXH2CDATA parameter which has been communicated to the host in nvmet_tcp_handle_icreq().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference at hibernate During hibernate sequence the source context might not have a clk_mgr. So don't use it to look for DML2 support.

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_port: Check IRQ data before use In case the leaf driver wants to use IRQ polling (irq = 0) and IIR register shows that an interrupt happened in the 8250 hardware the IRQ data can be NULL. In such a case we need to skip the wake event as we came to this path from the timer interrupt and quite likely system is already awake. Without this fix we have got an Oops: serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A ... BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:serial8250_handle_irq+0x7c/0x240 Call Trace: ? serial8250_handle_irq+0x7c/0x240 ? __pfx_serial8250_timeout+0x10/0x10

In the Linux kernel, the following vulnerability has been resolved: usb: hub: Guard against accesses to uninitialized BOS descriptors Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: another fix for the headless Adreno GPU Fix another oops reproducible when rebooting the board with the Adreno GPU working in the headless mode (e.g. iMX platforms). Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=74936831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM CPU: 0 PID: 51 Comm: reboot Not tainted 6.2.0-rc1-dirty #11 Hardware name: Freescale i.MX53 (Device Tree Support) PC is at msm_atomic_commit_tail+0x50/0x970 LR is at commit_tail+0x9c/0x188 pc : [<c06aa430>] lr : [<c067a214>] psr: 600e0013 sp : e0851d30 ip : ee4eb7eb fp : 00090acc r10: 00000058 r9 : c2193014 r8 : c4310000 r7 : c4759380 r6 : 07bef61d r5 : 00000000 r4 : 00000000 r3 : c44cc440 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 74910019 DAC: 00000051 Register r0 information: NULL pointer Register r1 information: NULL pointer Register r2 information: NULL pointer Register r3 information: slab kmalloc-1k start c44cc400 pointer offset 64 size 1024 Register r4 information: NULL pointer Register r5 information: NULL pointer Register r6 information: non-paged memory Register r7 information: slab kmalloc-128 start c4759380 pointer offset 0 size 128 Register r8 information: slab kmalloc-2k start c4310000 pointer offset 0 size 2048 Register r9 information: non-slab/vmalloc memory Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: non-paged memory Process reboot (pid: 51, stack limit = 0xc80046d9) Stack: (0xe0851d30 to 0xe0852000) 1d20: c4759380 fbd77200 000005ff 002b9c70 1d40: c4759380 c4759380 00000000 07bef61d 00000600 c0d6fe7c c2193014 00000058 1d60: 00090acc c067a214 00000000 c4759380 c4310000 00000000 c44cc854 c067a89c 1d80: 00000000 00000000 00000000 c4310468 00000000 c4759380 c4310000 c4310468 1da0: c4310470 c0643258 c4759380 00000000 00000000 c0c4ee24 00000000 c44cc810 1dc0: 00000000 c0c4ee24 00000000 c44cc810 00000000 0347d2a8 e0851e00 e0851e00 1de0: c4759380 c067ad20 c4310000 00000000 c44cc810 c27f8718 c44cc854 c067adb8 1e00: c4933000 00000002 00000001 00000000 00000000 c2130850 00000000 c2130854 1e20: c25fc488 00000000 c0ff162c 00000000 00000001 00000002 00000000 00000000 1e40: c43102c0 c43102c0 00000000 0347d2a8 c44cc810 c44cc814 c2133da8 c06d1a60 1e60: 00000000 00000000 00079028 c2012f24 fee1dead c4933000 00000058 c01431e4 1e80: 01234567 c0143a20 00000000 00000000 00000000 00000000 00000000 00000000 1ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f80: 00000000 00000000 00000000 0347d2a8 00000002 00000004 00000078 00000058 1fa0: c010028c c0100060 00000002 00000004 fee1dead 28121969 01234567 00079028 1fc0: 00000002 00000004 00000078 00000058 0002fdc5 00000000 00000000 00090acc 1fe0: 00000058 becc9c64 b6e97e05 b6e0e5f6 600e0030 fee1dead 00000000 00000000 msm_atomic_commit_tail from commit_tail+0x9c/0x188 commit_tail from drm_atomic_helper_commit+0x160/0x188 drm_atomic_helper_commit from drm_atomic_commit+0xac/0xe0 drm_atomic_commit from drm_atomic_helper_disable_all+0x1b0/0x1c0 drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x88/0x140 drm_atomic_helper_shutdown from device_shutdown+0x16c/0x240 device_shutdown from kernel_restart+0x38/0x90 kernel_restart from __do_sys_reboot+0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: cxl/mem: Fix shutdown order Ira reports that removing cxl_mock_mem causes a crash with the following trace: BUG: kernel NULL pointer dereference, address: 0000000000000044 [..] RIP: 0010:cxl_region_decode_reset+0x7f/0x180 [cxl_core] [..] Call Trace: <TASK> cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x29/0x40 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 bus_remove_device+0xd7/0x150 device_del+0x155/0x3e0 device_unregister+0x13/0x60 devm_release_action+0x4d/0x90 ? __pfx_unregister_port+0x10/0x10 [cxl_core] delete_endpoint+0x121/0x130 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 bus_remove_device+0xd7/0x150 device_del+0x155/0x3e0 ? lock_release+0x142/0x290 cdev_device_del+0x15/0x50 cxl_memdev_unregister+0x54/0x70 [cxl_core] This crash is due to the clearing out the cxl_memdev's driver context (@cxlds) before the subsystem is done with it. This is ultimately due to the region(s), that this memdev is a member, being torn down and expecting to be able to de-reference @cxlds, like here: static int cxl_region_decode_reset(struct cxl_region *cxlr, int count) ... if (cxlds->rcd) goto endpoint_reset; ... Fix it by keeping the driver context valid until memdev-device unregistration, and subsequently the entire stack of related dependencies, unwinds.

In the Linux kernel, the following vulnerability has been resolved: bpf: support non-r10 register spill/fill to/from stack in precision tracking Use instruction (jump) history to record instructions that performed register spill/fill to/from stack, regardless if this was done through read-only r10 register, or any other register after copying r10 into it *and* potentially adjusting offset. To make this work reliably, we push extra per-instruction flags into instruction history, encoding stack slot index (spi) and stack frame number in extra 10 bit flags we take away from prev_idx in instruction history. We don't touch idx field for maximum performance, as it's checked most frequently during backtracking. This change removes basically the last remaining practical limitation of precision backtracking logic in BPF verifier. It fixes known deficiencies, but also opens up new opportunities to reduce number of verified states, explored in the subsequent patches. There are only three differences in selftests' BPF object files according to veristat, all in the positive direction (less states). File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) -------------------------------------- ------------- --------- --------- ------------- ---------- ---------- ------------- test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%) xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%) xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%) Note, I avoided renaming jmp_history to more generic insn_hist to minimize number of lines changed and potential merge conflicts between bpf and bpf-next trees. Notice also cur_hist_entry pointer reset to NULL at the beginning of instruction verification loop. This pointer avoids the problem of relying on last jump history entry's insn_idx to determine whether we already have entry for current instruction or not. It can happen that we added jump history entry because current instruction is_jmp_point(), but also we need to add instruction flags for stack access. In this case, we don't want to entries, so we need to reuse last added entry, if it is present. Relying on insn_idx comparison has the same ambiguity problem as the one that was fixed recently in [0], so we avoid that. [0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/

In the Linux kernel, the following vulnerability has been resolved: mm: migrate: fix getting incorrect page mapping during page migration When running stress-ng testing, we found below kernel crash after a few hours: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... After analyzing the vmcore, I found this issue is caused by page migration. The scenario is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. There are seveval ways to fix this issue: (1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving 'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target page has not built mappings yet. (2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing the system, however, there are still some PFN walkers that call page_mapping() without holding the page lock, such as compaction. (3) Using target page->private field to save the 'anon_vma' pointer and 2 bits page state, just as page->mapping records an anonymous page, which can remove the page_mapping() impact for PFN walkers and also seems a simple way. So I choose option 3 to fix this issue, and this can also fix other potential issues for PFN walkers, such as compaction.

In the Linux kernel, the following vulnerability has been resolved: mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath() As commit 18365225f044 ("hwpoison, memcg: forcibly uncharge LRU pages"), hwpoison will forcibly uncharg a LRU hwpoisoned page, the folio_memcg could be NULl, then, mem_cgroup_track_foreign_dirty_slowpath() could occurs a NULL pointer dereference, let's do not record the foreign writebacks for folio memcg is null in mem_cgroup_track_foreign_dirty() to fix it.

In the Linux kernel, the following vulnerability has been resolved: hid: cp2112: Fix duplicate workqueue initialization Previously the cp2112 driver called INIT_DELAYED_WORK within cp2112_gpio_irq_startup, resulting in duplicate initilizations of the workqueue on subsequent IRQ startups following an initial request. This resulted in a warning in set_work_data in workqueue.c, as well as a rare NULL dereference within process_one_work in workqueue.c. Initialize the workqueue within _probe instead.

In the Linux kernel, the following vulnerability has been resolved: acpi: Fix suspend with Xen PV Commit f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest") missed one code path accessing real_mode_header, leading to dereferencing NULL when suspending the system under Xen: [ 348.284004] PM: suspend entry (deep) [ 348.289532] Filesystems sync: 0.005 seconds [ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 348.292457] OOM killer disabled. [ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done. [ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug) [ 348.749228] PM: suspend devices took 0.352 seconds [ 348.769713] ACPI: EC: interrupt blocked [ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 348.816080] #PF: supervisor read access in kernel mode [ 348.816081] #PF: error_code(0x0000) - not-present page [ 348.816083] PGD 0 P4D 0 [ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1 [ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022 [ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20 Fix that by adding an optional acpi callback allowing to skip setting the wakeup address, as in the Xen PV case this will be handled by the hypervisor anyway.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() It is possible that typec_register_partner() returns ERR_PTR on failure. When port->partner is an error, a NULL pointer dereference may occur as shown below. [91222.095236][ T319] typec port0: failed to register partner (-17) ... [91225.061491][ T319] Unable to handle kernel NULL pointer dereference at virtual address 000000000000039f [91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc [91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc [91225.308067][ T319] Call trace: [91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc [91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8 [91225.355900][ T319] kthread_worker_fn+0x178/0x58c [91225.355902][ T319] kthread+0x150/0x200 [91225.355905][ T319] ret_from_fork+0x10/0x30 Add a check for port->partner to avoid dereferencing a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: net: rds: Fix possible NULL-pointer dereference In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists before dereferencing it as rdma_set_service_type() argument Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a debugfs null pointer error [WHY & HOW] Check whether get_subvp_en() callback exists before calling it.

In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Check whether crossbar pad is non-NULL before access When translating source to sink streams in the crossbar subdev, the driver tries to locate the remote subdev connected to the sink pad. The remote pad may be NULL, if userspace tries to enable a stream that ends at an unconnected crossbar sink. When that occurs, the driver dereferences the NULL pad, leading to a crash. Prevent the crash by checking if the pad is NULL before using it, and return an error if it is.

In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap() Since 'ieee80211_beacon_get()' can return NULL, 'wfx_set_mfp_ap()' should check the return value before examining skb data. So convert the latter to return an appropriate error code and propagate it to return from 'wfx_start_ap()' as well. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: pstore/platform: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: crypto: rsa - add a check for allocation failure Static checkers insist that the mpi_alloc() allocation can fail so add a check to prevent a NULL dereference. Small allocations like this can't actually fail in current kernels, but adding a check is very simple and makes the static checkers happy.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump Syzkaller has reported a NULL pointer dereference when accessing rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in gfs2_rgrp_dump() to prevent that.

In the Linux kernel, the following vulnerability has been resolved: tty: vcc: Add check for kstrdup() in vcc_probe() Add check for the return value of kstrdup() and return the error, if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix duplicated list deletion The list deletion call dropped here is already called from the helper function in the line before. Having a second list_del() call results in either a warning (with CONFIG_DEBUG_LIST=y): list_del corruption, c46c8198->next is LIST_POISON1 (00000100) If CONFIG_DEBUG_LIST is disabled the operation results in a kernel error due to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue(): spin_lock_irqsave(&hsotg->lock, flags); ... if (!urb->hcpriv) { dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); goto out; } rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv ... out: spin_unlock_irqrestore(&hsotg->lock, flags); When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are concurrently executed, the NULL check of "urb->hcpriv" can be executed before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL pointer dereference. This possible bug is found by an experimental static analysis tool developed by myself. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported, when my tool analyzes the source code of Linux 6.5. To fix this possible bug, "urb->hcpriv = NULL" should be executed with holding the lock "hsotg->lock". After using this patch, my tool never reports the possible bug, with the kernelconfiguration allyesconfig for x86_64. Because I have no associated hardware, I cannot test the patch in runtime testing, and just verify it according to the code logic.

In the Linux kernel, the following vulnerability has been resolved: media: hantro: Check whether reset op is defined before use The i.MX8MM/N/P does not define the .reset op since reset of the VPU is done by genpd. Check whether the .reset op is defined before calling it to avoid NULL pointer dereference. Note that the Fixes tag is set to the commit which removed the reset op from i.MX8M Hantro G2 implementation, this is because before this commit all the implementations did define the .reset op.

In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid NULL pointer dereference if no valid csum tree [BUG] When trying read-only scrub on a btrfs with rescue=idatacsums mount option, it will crash with the following call trace: BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs] scrub_simple_mirror+0x175/0x290 [btrfs] scrub_stripe+0x5f7/0x6f0 [btrfs] scrub_chunk+0x9a/0x150 [btrfs] scrub_enumerate_chunks+0x333/0x660 [btrfs] btrfs_scrub_dev+0x23e/0x600 [btrfs] btrfs_ioctl+0x1dcf/0x2f80 [btrfs] __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e [CAUSE] Mount option "rescue=idatacsums" will completely skip loading the csum tree, so that any data read will not find any data csum thus we will ignore data checksum verification. Normally call sites utilizing csum tree will check the fs state flag NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all. This results in scrub to call btrfs_search_slot() on a NULL pointer and triggered above crash. [FIX] Check both extent and csum tree root before doing any tree search.

In the Linux kernel, the following vulnerability has been resolved: regulator: dummy: force synchronous probing Sometimes I get a NULL pointer dereference at boot time in kobject_get() with the following call stack: anatop_regulator_probe() devm_regulator_register() regulator_register() regulator_resolve_supply() kobject_get() By placing some extra BUG_ON() statements I could verify that this is raised because probing of the 'dummy' regulator driver is not completed ('dummy_regulator_rdev' is still NULL). In the JTAG debugger I can see that dummy_regulator_probe() and anatop_regulator_probe() can be run by different kernel threads (kworker/u4:*). I haven't further investigated whether this can be changed or if there are other possibilities to force synchronization between these two probe routines. On the other hand I don't expect much boot time penalty by probing the 'dummy' regulator synchronously.

In the Linux kernel, the following vulnerability has been resolved: HID: appleir: Fix potential NULL dereference at raw event handle Syzkaller reports a NULL pointer dereference issue in input_event(). BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline] BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395 Read of size 8 at addr 0000000000000028 by task syz-executor199/2949 CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 kasan_report+0xd9/0x110 mm/kasan/report.c:602 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] is_event_supported drivers/input/input.c:67 [inline] input_event+0x42/0xa0 drivers/input/input.c:395 input_report_key include/linux/input.h:439 [inline] key_down drivers/hid/hid-appleir.c:159 [inline] appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232 __hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111 hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484 __usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734 dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993 __run_hrtimer kernel/time/hrtimer.c:1739 [inline] __hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803 hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820 handle_softirqs+0x206/0x8d0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 __mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185 add_timer+0x62/0x90 kernel/time/timer.c:1295 schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98 usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645 usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784 hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This happens due to the malformed report items sent by the emulated device which results in a report, that has no fields, being added to the report list. Due to this appleir_input_configured() is never called, hidinput_connect() fails which results in the HID_CLAIMED_INPUT flag is not being set. However, it does not make appleir_probe() fail and lets the event callback to be called without the associated input device. Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook early if the driver didn't claim any input_dev for some reason. Moreover, some other hid drivers accessing input_dev in their event callbacks do have similar checks, too. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: drop redundant sched job cleanup when cs is aborted Once command submission failed due to userptr invalidation in amdgpu_cs_submit, legacy code will perform cleanup of scheduler job. However, it's not needed at all, as former commit has integrated job cleanup stuff into amdgpu_job_free. Otherwise, because of double free, a NULL pointer dereference will occur in such scenario. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL dereference on XCOPY completion CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? set_kthread_struct+0x40/0x40 [12622.970884] ret_from_fork+0x22/0x30 [12622.974875] </TASK> [12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_w ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues efx->xdp_tx_queue_count is initially initialized to num_possible_cpus() and is later used to allocate and traverse efx->xdp_tx_queues lookup array. However, we may end up not initializing all the array slots with real queues during probing. This results, for example, in a NULL pointer dereference, when running "# ethtool -S <iface>", similar to below [2570283.664955][T4126959] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [2570283.681283][T4126959] #PF: supervisor read access in kernel mode [2570283.695678][T4126959] #PF: error_code(0x0000) - not-present page [2570283.710013][T4126959] PGD 0 P4D 0 [2570283.721649][T4126959] Oops: 0000 [#1] SMP PTI [2570283.734108][T4126959] CPU: 23 PID: 4126959 Comm: ethtool Tainted: G O 5.10.20-cloudflare-2021.3.1 #1 [2570283.752641][T4126959] Hardware name: <redacted> [2570283.781408][T4126959] RIP: 0010:efx_ethtool_get_stats+0x2ca/0x330 [sfc] [2570283.796073][T4126959] Code: 00 85 c0 74 39 48 8b 95 a8 0f 00 00 48 85 d2 74 2d 31 c0 eb 07 48 8b 95 a8 0f 00 00 48 63 c8 49 83 c4 08 83 c0 01 48 8b 14 ca <48> 8b 92 f8 00 00 00 49 89 54 24 f8 39 85 a0 0f 00 00 77 d7 48 8b [2570283.831259][T4126959] RSP: 0018:ffffb79a77657ce8 EFLAGS: 00010202 [2570283.845121][T4126959] RAX: 0000000000000019 RBX: ffffb799cd0c9280 RCX: 0000000000000018 [2570283.860872][T4126959] RDX: 0000000000000000 RSI: ffff96dd970ce000 RDI: 0000000000000005 [2570283.876525][T4126959] RBP: ffff96dd86f0a000 R08: ffff96dd970ce480 R09: 000000000000005f [2570283.892014][T4126959] R10: ffffb799cd0c9fff R11: ffffb799cd0c9000 R12: ffffb799cd0c94f8 [2570283.907406][T4126959] R13: ffffffffc11b1090 R14: ffff96dd970ce000 R15: ffffffffc11cd66c [2570283.922705][T4126959] FS: 00007fa7723f8740(0000) GS:ffff96f51fac0000(0000) knlGS:0000000000000000 [2570283.938848][T4126959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2570283.952524][T4126959] CR2: 00000000000000f8 CR3: 0000001a73e6e006 CR4: 00000000007706e0 [2570283.967529][T4126959] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2570283.982400][T4126959] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2570283.997308][T4126959] PKRU: 55555554 [2570284.007649][T4126959] Call Trace: [2570284.017598][T4126959] dev_ethtool+0x1832/0x2830 Fix this by adjusting efx->xdp_tx_queue_count after probing to reflect the true value of initialized slots in efx->xdp_tx_queues.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: ideapad-laptop: fix a NULL pointer dereference The third parameter of dytc_cql_command should not be NULL since it will be dereferenced immediately.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work

In the Linux kernel, the following vulnerability has been resolved: usb: host: ohci-tmio: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf In commit 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only") a check for CEA modes was added to function mtk_hdmi_bridge_mode_valid() in order to address possible issues on MT8167; moreover, with commit c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock") another similar check was introduced. Unfortunately though, at the time of writing, MT8173 does not provide any mtk_hdmi_conf structure and this is crashing the kernel with NULL pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as soon as a HDMI cable gets plugged in. To fix this regression, add a NULL pointer check for hdmi->conf in the said function, restoring HDMI functionality and avoiding NULL pointer kernel panics.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check")

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reserve extra IRQ vectors Commit a6dcfe08487e ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs. That breaks vector allocation assumptions in qla83xx_iospace_config(), qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions computes maximum number of qpairs as: ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default response queue) - 1 (ATIO, in dual or pure target mode) max_qpairs is set to zero in case of two CPUs and initiator mode. The number is then used to allocate ha->queue_pair_map inside qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is left NULL but the driver thinks there are queue pairs available. qla2xxx_queuecommand() tries to find a qpair in the map and crashes: if (ha->mqenable) { uint32_t tag; uint16_t hwq; struct qla_qpair *qpair = NULL; tag = blk_mq_unique_tag(cmd->request); hwq = blk_mq_unique_tag_to_hwq(tag); qpair = ha->queue_pair_map[hwq]; # <- HERE if (qpair) return qla2xxx_mqueuecommand(host, cmd, qpair); } BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc] RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx] Call Trace: scsi_queue_rq+0x58c/0xa60 blk_mq_dispatch_rq_list+0x2b7/0x6f0 ? __sbitmap_get_word+0x2a/0x80 __blk_mq_sched_dispatch_requests+0xb8/0x170 blk_mq_sched_dispatch_requests+0x2b/0x50 __blk_mq_run_hw_queue+0x49/0xb0 __blk_mq_delay_run_hw_queue+0xfb/0x150 blk_mq_sched_insert_request+0xbe/0x110 blk_execute_rq+0x45/0x70 __scsi_execute+0x10e/0x250 scsi_probe_and_add_lun+0x228/0xda0 __scsi_scan_target+0xf4/0x620 ? __pm_runtime_resume+0x4f/0x70 scsi_scan_target+0x100/0x110 fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc] process_one_work+0x1ea/0x3b0 worker_thread+0x28/0x3b0 ? process_one_work+0x3b0/0x3b0 kthread+0x112/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 The driver should allocate enough vectors to provide every CPU it's own HW queue and still handle reserved (MB, RSP, ATIO) interrupts. The change fixes the crash on dual core VM and prevents unbalanced QP allocation where nr_hw_queues is two less than the number of CPUs.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Make sure GHCB is mapped before updating Access to the GHCB is mainly in the VMGEXIT path and it is known that the GHCB will be mapped. But there are two paths where it is possible the GHCB might not be mapped. The sev_vcpu_deliver_sipi_vector() routine will update the GHCB to inform the caller of the AP Reset Hold NAE event that a SIPI has been delivered. However, if a SIPI is performed without a corresponding AP Reset Hold, then the GHCB might not be mapped (depending on the previous VMEXIT), which will result in a NULL pointer dereference. The svm_complete_emulated_msr() routine will update the GHCB to inform the caller of a RDMSR/WRMSR operation about any errors. While it is likely that the GHCB will be mapped in this situation, add a safe guard in this path to be certain a NULL pointer dereference is not encountered.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix NULL dereference in nfs3svc_encode_getaclres In error cases the dentry may be NULL. Before 20798dfe249a, the encoder also checked dentry and d_really_is_positive(dentry), but that looks like overkill to me--zero status should be enough to guarantee a positive dentry. This isn't the first time we've seen an error-case NULL dereference hidden in the initialization of a local variable in an xdr encoder. But I went back through the other recent rewrites and didn't spot any similar bugs.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix potential null dereference on pointer status There are calls to idxd_cmd_exec that pass a null status pointer however a recent commit has added an assignment to *status that can end up with a null pointer dereference. The function expects a null status pointer sometimes as there is a later assignment to *status where status is first null checked. Fix the issue by null checking status before making the assignment. Addresses-Coverity: ("Explicit null dereferenced")

In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multipline alignment]

In the Linux kernel, the following vulnerability has been resolved: media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com On the case tmp_dcim=1, the index of buffer is miscalculated. This generate a NULL pointer dereference later. So let's fix the calcul and add a check to prevent this to reappear.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null pointer dereference in svc_rqst_free() When alloc_pages_node() returns null in svc_rqst_alloc(), the null rq_scratch_page pointer will be dereferenced when calling put_page() in svc_rqst_free(). Fix it by adding a null check. Addresses-Coverity: ("Dereference after null check")

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: fix NULL-deref on disconnect Commit 9d7b18668956 ("HID: magicmouse: add support for Apple Magic Trackpad 2") added a sanity check for an Apple trackpad but returned success instead of -ENODEV when the check failed. This means that the remove callback will dereference the never-initialised driver data pointer when the driver is later unbound (e.g. on USB disconnect).

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent NULL deref in cifs_compose_mount_options() The optional @ref parameter might contain an NULL node_name, so prevent dereferencing it in cifs_compose_mount_options(). Addresses-Coverity: 1476408 ("Explicit null dereferenced")

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Protect driver from buggy firmware When processing port up/down events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not the CPU port (local port 0), which exists, but lacks a netdev. This can result in a NULL pointer dereference when calling netif_carrier_{on,off}(). Fix this by bailing early when processing an event reported for the CPU port. Problem was only observed when running on top of a buggy emulator.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled When only PHY1 is used (for example on Odroid-HC4), the regmap init code uses the usb2 ports when doesn't initialize the PHY1 regmap entry. This fixes: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... pc : regmap_update_bits_base+0x40/0xa0 lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 ... Call trace: regmap_update_bits_base+0x40/0xa0 dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 dwc3_meson_g12a_usb2_init+0x7c/0xc8 dwc3_meson_g12a_usb_init+0x28/0x48 dwc3_meson_g12a_probe+0x298/0x540 platform_probe+0x70/0xe0 really_probe+0xf0/0x4d8 driver_probe_device+0xfc/0x168 ...

In the Linux kernel, the following vulnerability has been resolved: seg6: fix the iif in the IPv6 socket control block When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving interface index into the IPv4 socket control block (v5.16-rc4, net/ipv4/ip_input.c line 510): IPCB(skb)->iif = skb->skb_iif; If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH header, the seg6_do_srh_encap(...) performs the required encapsulation. In this case, the seg6_do_srh_encap function clears the IPv6 socket control block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163): memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29). Since the IPv6 socket control block and the IPv4 socket control block share the same memory area (skb->cb), the receiving interface index info is lost (IP6CB(skb)->iif is set to zero). As a side effect, that condition triggers a NULL pointer dereference if commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") is applied. To fix that issue, we set the IP6CB(skb)->iif with the index of the receiving interface once again.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix possible null pointer dereference. This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c"