In the Linux kernel, the following vulnerability has been resolved: net: phy: fix null-ptr-deref while probe() failed I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct().

In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid NULL pointer dereference if no valid extent tree [BUG] Syzbot reported a crash with the following call trace: BTRFS info (device loop0): scrub: started on devid 1 BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs] scrub_simple_mirror+0x175/0x260 [btrfs] scrub_stripe+0x5d4/0x6c0 [btrfs] scrub_chunk+0xbb/0x170 [btrfs] scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs] btrfs_scrub_dev+0x240/0x600 [btrfs] btrfs_ioctl+0x1dc8/0x2fa0 [btrfs] ? do_sys_openat2+0xa5/0xf0 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [CAUSE] The reproducer is using a corrupted image where extent tree root is corrupted, thus forcing to use "rescue=all,ro" mount option to mount the image. Then it triggered a scrub, but since scrub relies on extent tree to find where the data/metadata extents are, scrub_find_fill_first_stripe() relies on an non-empty extent root. But unfortunately scrub_find_fill_first_stripe() doesn't really expect an NULL pointer for extent root, it use extent_root to grab fs_info and triggered a NULL pointer dereference. [FIX] Add an extra check for a valid extent root at the beginning of scrub_find_fill_first_stripe(). The new error path is introduced by 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots"), but that's pretty old, and later commit b979547513ff ("btrfs: scrub: introduce helper to find and fill sector info for a scrub_stripe") changed how we do scrub. So for kernels older than 6.6, the fix will need manual backport.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci: fix NULL pointer issue on shared irq case The tcpci_irq() may meet below NULL pointer dereference issue: [ 2.641851] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 2.641951] status 0x1, 0x37f [ 2.650659] Mem abort info: [ 2.656490] ESR = 0x0000000096000004 [ 2.660230] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.665532] SET = 0, FnV = 0 [ 2.668579] EA = 0, S1PTW = 0 [ 2.671715] FSC = 0x04: level 0 translation fault [ 2.676584] Data abort info: [ 2.679459] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 2.684936] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 2.689980] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 2.695284] [0000000000000010] user address but active_mm is swapper [ 2.701632] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 2.707883] Modules linked in: [ 2.710936] CPU: 1 UID: 0 PID: 87 Comm: irq/111-2-0051 Not tainted 6.12.0-rc6-06316-g7f63786ad3d1-dirty #4 [ 2.720570] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 2.726040] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.732989] pc : tcpci_irq+0x38/0x318 [ 2.736647] lr : _tcpci_irq+0x14/0x20 [ 2.740295] sp : ffff80008324bd30 [ 2.743597] x29: ffff80008324bd70 x28: ffff800080107894 x27: ffff800082198f70 [ 2.750721] x26: ffff0000050e6680 x25: ffff000004d172ac x24: ffff0000050f0000 [ 2.757845] x23: ffff000004d17200 x22: 0000000000000001 x21: ffff0000050f0000 [ 2.764969] x20: ffff000004d17200 x19: 0000000000000000 x18: 0000000000000001 [ 2.772093] x17: 0000000000000000 x16: ffff80008183d8a0 x15: ffff00007fbab040 [ 2.779217] x14: ffff00007fb918c0 x13: 0000000000000000 x12: 000000000000017a [ 2.786341] x11: 0000000000000001 x10: 0000000000000a90 x9 : ffff80008324bd00 [ 2.793465] x8 : ffff0000050f0af0 x7 : ffff00007fbaa840 x6 : 0000000000000031 [ 2.800589] x5 : 000000000000017a x4 : 0000000000000002 x3 : 0000000000000002 [ 2.807713] x2 : ffff80008324bd3a x1 : 0000000000000010 x0 : 0000000000000000 [ 2.814838] Call trace: [ 2.817273] tcpci_irq+0x38/0x318 [ 2.820583] _tcpci_irq+0x14/0x20 [ 2.823885] irq_thread_fn+0x2c/0xa8 [ 2.827456] irq_thread+0x16c/0x2f4 [ 2.830940] kthread+0x110/0x114 [ 2.834164] ret_from_fork+0x10/0x20 [ 2.837738] Code: f9426420 f9001fe0 d2800000 52800201 (f9400a60) This may happen on shared irq case. Such as two Type-C ports share one irq. After the first port finished tcpci_register_port(), it may trigger interrupt. However, if the interrupt comes by chance the 2nd port finishes devm_request_threaded_irq(), the 2nd port interrupt handler will run at first. Then the above issue happens due to tcpci is still a NULL pointer in tcpci_irq() when dereference to regmap. devm_request_threaded_irq() <-- port1 irq comes disable_irq(client->irq); tcpci_register_port() This will restore the logic to the state before commit (77e85107a771 "usb: typec: tcpci: support edge irq"). However, moving tcpci_register_port() earlier creates a problem when use edge irq because tcpci_init() will be called before devm_request_threaded_irq(). The tcpci_init() writes the ALERT_MASK to the hardware to tell it to start generating interrupts but we're not ready to deal with them yet, then the ALERT events may be missed and ALERT line will not recover to high level forever. To avoid the issue, this will also set ALERT_MASK register after devm_request_threaded_irq() return.

In the Linux kernel, the following vulnerability has been resolved: mailbox: th1520: Fix a NULL vs IS_ERR() bug The devm_ioremap() function doesn't return error pointers, it returns NULL. Update the error checking to match.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: int3472: Check for adev == NULL Not all devices have an ACPI companion fwnode, so adev might be NULL. This can e.g. (theoretically) happen when a user manually binds one of the int3472 drivers to another i2c/platform device through sysfs. Add a check for adev not being set and return -ENODEV in that case to avoid a possible NULL pointer deref in skl_int3472_get_acpi_buffer().

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: tests: Fix potential NULL dereference in test_cfg80211_parse_colocated_ap() kunit_kzalloc() may return NULL, dereferencing it without NULL check may lead to NULL dereference. Add a NULL check for ies.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name() devm_kstrdup() can return a NULL pointer on failure,but this returned value in btbcm_get_board_name() is not checked. Add NULL check in btbcm_get_board_name(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: ubifs: skip dumping tnc tree when zroot is null Clearing slab cache will free all znode in memory and make c->zroot.znode = NULL, then dumping tnc tree will access c->zroot.znode which cause null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy() In split_large_buddy(), we might call pfn_to_page() on a PFN that might not exist. In corner cases, such as when freeing the highest pageblock in the last memory section, this could result with CONFIG_SPARSEMEM && !CONFIG_SPARSEMEM_EXTREME in __pfn_to_section() returning NULL and and __section_mem_map_addr() dereferencing that NULL pointer. Let's fix it, and avoid doing a pfn_to_page() call for the first iteration, where we already have the page. So far this was found by code inspection, but let's just CC stable as the fix is easy.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links In mt7925_change_vif_links() devm_kzalloc() may return NULL but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: gve: guard XSK operations on the existence of queues This patch predicates the enabling and disabling of XSK pools on the existence of queues. As it stands, if the interface is down, disabling or enabling XSK pools would result in a crash, as the RX queue pointer would be NULL. XSK pool registration will occur as part of the next interface up. Similarly, xsk_wakeup needs be guarded against queues disappearing while the function is executing, so a check against the GVE_PRIV_FLAGS_NAPI_ENABLED flag is added to synchronize with the disabling of the bit and the synchronize_net() in gve_turndown.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-mpmu: Fix a NULL vs IS_ERR() check The devm_kzalloc() function returns NULL on error, not error pointers. Update the check to match.

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Add NULL check in mt_input_configured devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt_input_configured() is not checked. Add NULL check in mt_input_configured(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1298: Add NULL check in ads1298_init devm_kasprintf() can return a NULL pointer on failure. A check on the return value of such a call in ads1298_init() is missing. Add it.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-apbcp: Fix a NULL vs IS_ERR() check The devm_kzalloc() function doesn't return error pointers, it returns NULL on error. Update the check to match.

In the Linux kernel, the following vulnerability has been resolved: phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PM In some cases, rk_hdptx_phy_runtime_resume() may be invoked before platform_set_drvdata() is executed in ->probe(), leading to a NULL pointer dereference when using the return of dev_get_drvdata(). Ensure platform_set_drvdata() is called before devm_pm_runtime_enable().

In the Linux kernel, the following vulnerability has been resolved: clk: mmp2: call pm_genpd_init() only after genpd.name is set Setting the genpd's struct device's name with dev_set_name() is happening within pm_genpd_init(). If it remains NULL, things can blow up later, such as when crafting the devfs hierarchy for the power domain: Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read ... Call trace: strlen from start_creating+0x90/0x138 start_creating from debugfs_create_dir+0x20/0x178 debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144 genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90 genpd_debug_init from do_one_initcall+0x5c/0x244 do_one_initcall from kernel_init_freeable+0x19c/0x1f4 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x28 Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name with dev_name(&genpd->dev) in genpd_debug_add.part().

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Set video drvdata before register video device The video drvdata should be set before the video device is registered, otherwise video_drvdata() may return NULL in the open() file ops, and led to oops.

In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU Commit 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU") adds functionality that architectures can use to optionally allocate and build cacheinfo early during boot. Commit 6539cffa9495 ("cacheinfo: Add arch specific early level initializer") lets secondary CPUs correct (and reallocate memory) cacheinfo data if needed. If the early build functionality is not used and cacheinfo does not need correction, memory for cacheinfo is never allocated. x86 does not use the early build functionality. Consequently, during the cacheinfo CPU hotplug callback, last_level_cache_is_valid() attempts to dereference a NULL pointer: BUG: kernel NULL pointer dereference, address: 0000000000000100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not present page PGD 0 P4D 0 Oops: 0000 [#1] PREEPMT SMP NOPTI CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1 RIP: 0010: last_level_cache_is_valid+0x95/0xe0a Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback if not done earlier. Moreover, before determining the validity of the last-level cache info, ensure that it has been allocated. Simply checking for non-zero cache_leaves() is not sufficient, as some architectures (e.g., Intel processors) have non-zero cache_leaves() before allocation. Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size(). This function iterates over all online CPUs. However, a CPU may have come online recently, but its cacheinfo may not have been allocated yet. While here, remove an unnecessary indentation in allocate_cache_info(). [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Dereference null return value In the function pqm_uninit there is a call-assignment of "pdd = kfd_get_process_device_data" which could be null, and this value was later dereferenced without checking.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio' If platform_get_resource_byname() fails and returns NULL because DT lacks an 'mmio' property for the MHI endpoint, dereferencing res->start will cause a NULL pointer access. Add a check to prevent it. [kwilczynski: error message update per the review feedback] [bhelgaas: commit log]

In the Linux kernel, the following vulnerability has been resolved: leds: class: Protect brightness_show() with led_cdev->led_access mutex There is NULL pointer issue observed if from Process A where hid device being added which results in adding a led_cdev addition and later a another call to access of led_cdev attribute from Process B can result in NULL pointer issue. Use mutex led_cdev->led_access to protect access to led->cdev and its attribute inside brightness_show() and max_brightness_show() and also update the comment for mutex that it should be used to protect the led class device fields. Process A Process B kthread+0x114 worker_thread+0x244 process_scheduled_works+0x248 uhid_device_add_worker+0x24 hid_add_device+0x120 device_add+0x268 bus_probe_device+0x94 device_initial_probe+0x14 __device_attach+0xfc bus_for_each_drv+0x10c __device_attach_driver+0x14c driver_probe_device+0x3c __driver_probe_device+0xa0 really_probe+0x190 hid_device_probe+0x130 ps_probe+0x990 ps_led_register+0x94 devm_led_classdev_register_ext+0x58 led_classdev_register_ext+0x1f8 device_create_with_groups+0x48 device_create_groups_vargs+0xc8 device_add+0x244 kobject_uevent+0x14 kobject_uevent_env[jt]+0x224 mutex_unlock[jt]+0xc4 __mutex_unlock_slowpath+0xd4 wake_up_q+0x70 try_to_wake_up[jt]+0x48c preempt_schedule_common+0x28 __schedule+0x628 __switch_to+0x174 el0t_64_sync+0x1a8/0x1ac el0t_64_sync_handler+0x68/0xbc el0_svc+0x38/0x68 do_el0_svc+0x1c/0x28 el0_svc_common+0x80/0xe0 invoke_syscall+0x58/0x114 __arm64_sys_read+0x1c/0x2c ksys_read+0x78/0xe8 vfs_read+0x1e0/0x2c8 kernfs_fop_read_iter+0x68/0x1b4 seq_read_iter+0x158/0x4ec kernfs_seq_show+0x44/0x54 sysfs_kf_seq_show+0xb4/0x130 dev_attr_show+0x38/0x74 brightness_show+0x20/0x4c dualshock4_led_get_brightness+0xc/0x74 [ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 3313.874301][ T4013] Mem abort info: [ 3313.874303][ T4013] ESR = 0x0000000096000006 [ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits [ 3313.874307][ T4013] SET = 0, FnV = 0 [ 3313.874309][ T4013] EA = 0, S1PTW = 0 [ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault [ 3313.874313][ T4013] Data abort info: [ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000 .. [ 3313.874332][ T4013] Dumping ftrace buffer: [ 3313.874334][ T4013] (ftrace buffer empty) .. .. [ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader [ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74 [ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60 [ 3313.874656][ T4013] sp : ffffffc0b910bbd0 .. .. [ 3313.874685][ T4013] Call trace: [ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74 [ 3313.874690][ T4013] brightness_show+0x20/0x4c [ 3313.874692][ T4013] dev_attr_show+0x38/0x74 [ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130 [ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54 [ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec [ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4 [ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8 [ 3313.874711][ T4013] ksys_read+0x78/0xe8 [ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c [ 3313.874718][ T4013] invoke_syscall+0x58/0x114 [ 3313.874721][ T4013] el0_svc_common+0x80/0xe0 [ 3313.874724][ T4013] do_el0_svc+0x1c/0x28 [ 3313.874727][ T4013] el0_svc+0x38/0x68 [ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc [ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix NULL pointer dereference in capture_engine When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d)

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: qcom: Only free platform MSIs when ESI is enabled Otherwise, it will result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: mutex_lock+0xc/0x54 platform_device_msi_free_irqs_all+0x14/0x20 ufs_qcom_remove+0x34/0x48 [ufs_qcom] platform_remove+0x28/0x44 device_remove+0x4c/0x80 device_release_driver_internal+0xd8/0x178 driver_detach+0x50/0x9c bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 ufs_qcom_pltform_exit+0x18/0xb94 [ufs_qcom] __arm64_sys_delete_module+0x180/0x260 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xdc el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL check may lead to NULL dereference. Add NULL checks for all the kunit_kzalloc() in sound_kunit.c

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix regression with module command in stack_trace_filter When executing the following command: # echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter The current mod command causes a null pointer dereference. While commit 0f17976568b3f ("ftrace: Fix regression with module command in stack_trace_filter") has addressed part of the issue, it left a corner case unhandled, which still results in a kernel crash.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory.

In the Linux kernel, the following vulnerability has been resolved: net: enetc: Do not configure preemptible TCs if SIs do not support Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs() to configure preemptible TCs. However, only PF is able to configure preemptible TCs. Because only PF has related registers, while VF does not have these registers. So for VF, its hw->port pointer is NULL. Therefore, VF will access an invalid pointer when accessing a non-existent register, which will cause a crash issue. The simplified log is as follows. root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \ mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1 [ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00 [ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400 [ 187.511140] Call trace: [ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.518918] enetc_setup_tc_mqprio+0x180/0x214 [ 187.523374] enetc_vf_setup_tc+0x1c/0x30 [ 187.527306] mqprio_enable_offload+0x144/0x178 [ 187.531766] mqprio_init+0x3ec/0x668 [ 187.535351] qdisc_create+0x15c/0x488 [ 187.539023] tc_modify_qdisc+0x398/0x73c [ 187.542958] rtnetlink_rcv_msg+0x128/0x378 [ 187.547064] netlink_rcv_skb+0x60/0x130 [ 187.550910] rtnetlink_rcv+0x18/0x24 [ 187.554492] netlink_unicast+0x300/0x36c [ 187.558425] netlink_sendmsg+0x1a8/0x420 [ 187.606759] ---[ end trace 0000000000000000 ]--- In addition, some PFs also do not support configuring preemptible TCs, such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs, but we should prevent these PFs from accessing these unimplemented registers.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the memory allocation issue in amdgpu_discovery_get_nps_info() Fix two issues with memory allocation in amdgpu_discovery_get_nps_info() for mem_ranges: - Add a check for allocation failure to avoid dereferencing a null pointer. - As suggested by Christophe, use kvcalloc() for memory allocation, which checks for multiplication overflow. Additionally, assign the output parameters nps_type and range_cnt after the kvcalloc() call to prevent modifying the output parameters in case of an error return.

In the Linux kernel, the following vulnerability has been resolved: media: wl128x: Fix atomicity violation in fmc_send_cmd() Atomicity violation occurs when the fmc_send_cmd() function is executed simultaneously with the modification of the fmdev->resp_skb value. Consider a scenario where, after passing the validity check within the function, a non-null fmdev->resp_skb variable is assigned a null value. This results in an invalid fmdev->resp_skb variable passing the validity check. As seen in the later part of the function, skb = fmdev->resp_skb; when the invalid fmdev->resp_skb passes the check, a null pointer dereference error may occur at line 478, evt_hdr = (void *)skb->data; To address this issue, it is recommended to include the validity check of fmdev->resp_skb within the locked section of the function. This modification ensures that the value of fmdev->resp_skb does not change during the validation process, thereby maintaining its validity. This possible bug is found by an experimental static analysis tool developed by our team. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, prevent potential error pointer dereference The dr_domain_add_vport_cap() function generally returns NULL on error but sometimes we want it to return ERR_PTR(-EBUSY) so the caller can retry. The problem here is that "ret" can be either -EBUSY or -ENOMEM and if it's and -ENOMEM then the error pointer is propogated back and eventually dereferenced in dr_ste_v0_build_src_gvmi_qpn_tag().

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix migrate_to_node() assuming there is at least one VMA in a MM We currently assume that there is at least one VMA in a MM, which isn't true. So we might end up having find_vma() return NULL, to then de-reference NULL. So properly handle find_vma() returning NULL. This fixes the report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline] RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194 Code: ... RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000 RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044 RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1 R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003 R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8 FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> kernel_migrate_pages+0x5b2/0x750 mm/mempolicy.c:1709 __do_sys_migrate_pages mm/mempolicy.c:1727 [inline] __se_sys_migrate_pages mm/mempolicy.c:1723 [inline] __x64_sys_migrate_pages+0x96/0x100 mm/mempolicy.c:1723 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [akpm@linux-foundation.org: add unlikely()]

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix when get product name maybe null pointer Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes. This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard. Kernel logs: [ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]: [ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: avoid NULL pointer error during sdio remove When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON is set to yes, kernel panic will happen: Call trace: destroy_workqueue+0x1c/0x258 ath10k_sdio_remove+0x84/0x94 sdio_bus_remove+0x50/0x16c device_release_driver_internal+0x188/0x25c device_driver_detach+0x20/0x2c This is because during 'rmmod ath10k', ath10k_sdio_remove() will call ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release() will finally be called in ath10k_core_destroy(). This function will free struct cfg80211_registered_device *rdev and all its members, including wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON. After device release, destroy_workqueue() will use NULL pointer then the kernel panic happen. Call trace: ath10k_sdio_remove ->ath10k_core_unregister …… ->ath10k_core_stop ->ath10k_hif_stop ->ath10k_sdio_irq_disable ->ath10k_hif_power_down ->del_timer_sync(&ar_sdio->sleep_timer) ->ath10k_core_destroy ->ath10k_mac_destroy ->ieee80211_free_hw ->wiphy_free …… ->wiphy_dev_release ->destroy_workqueue Need to call destroy_workqueue() before ath10k_core_destroy(), free the work queue buffer first and then free pointer of work queue by ath10k_core_destroy(). This order matches the error path order in ath10k_sdio_probe(). No work will be queued on sdio workqueue between it is destroyed and ath10k_core_destroy() is called. Based on the call_stack above, the reason is: Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and ath10k_sdio_irq_disable() will queue work on sdio workqueue. Sleep timer will be deleted before ath10k_core_destroy() in ath10k_hif_power_down(). ath10k_sdio_irq_disable() only be called in ath10k_hif_stop(). ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif bus, so ath10k_sdio_hif_tx_sg() won't be called anymore. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is fully initialized, we can hit the panic below: hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_utils ... BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1 RIP: 0010:hv_pkt_iter_first+0x12/0xd0 Call Trace: ... vmbus_recvpacket hv_kvp_onchannelcallback vmbus_on_event tasklet_action_common tasklet_action handle_softirqs irq_exit_rcu sysvec_hyperv_stimer0 </IRQ> <TASK> asm_sysvec_hyperv_stimer0 ... kvp_register_done hvt_op_read vfs_read ksys_read __x64_sys_read This can happen because the KVP/VSS channel callback can be invoked even before the channel is fully opened: 1) as soon as hv_kvp_init() -> hvutil_transport_init() creates /dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and register itself to the driver by writing a message KVP_OP_REGISTER1 to the file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and reading the file for the driver's response, which is handled by hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done(). 2) the problem with kvp_register_done() is that it can cause the channel callback to be called even before the channel is fully opened, and when the channel callback is starting to run, util_probe()-> vmbus_open() may have not initialized the ringbuffer yet, so the callback can hit the panic of NULL pointer dereference. To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in __vmbus_open(), just before the first hv_ringbuffer_init(), and then we unload and reload the driver hv_utils, and run the daemon manually within the 10 seconds. Fix the panic by reordering the steps in util_probe() so the char dev entry used by the KVP or VSS daemon is not created until after vmbus_open() has completed. This reordering prevents the race condition from happening.

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: vop: Fix a dereferenced before check warning The 'state' can't be NULL, we should check crtc_state. Fix warning: drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096 vop_plane_atomic_async_check() warn: variable dereferenced before check 'state' (see line 1077)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in dcn20_program_pipe This commit addresses a null pointer dereference issue in dcn20_program_pipe(). Previously, commit 8e4ed3cf1642 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe") partially fixed the null pointer dereference issue. However, in dcn20_update_dchubp_dpp(), the variable pipe_ctx is passed in, and plane_state is accessed again through pipe_ctx. Multiple if statements directly call attributes of plane_state, leading to potential null pointer dereference issues. This patch adds necessary null checks to ensure stability.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT: Fix null-ptr-deref in add rule err flow In error flow of mlx5_tc_ct_entry_add_rule(), in case ct_rule_add() callback returns error, zone_rule->attr is used uninitiated. Fix it to use attr which has the needed pointer value. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000110 RIP: 0010:mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core] … Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x140 ? asm_exc_page_fault+0x22/0x30 ? mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core] ? mlx5_tc_ct_entry_add_rule+0x1d5/0x2f0 [mlx5_core] mlx5_tc_ct_block_flow_offload+0xc6a/0xf90 [mlx5_core] ? nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table] nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table] flow_offload_work_handler+0x142/0x320 [nf_flow_table] ? finish_task_switch.isra.0+0x15b/0x2b0 process_one_work+0x16c/0x320 worker_thread+0x28c/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xb8/0xf0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: fix a NULL-pointer dereference Some SCM calls can be invoked with __scm being NULL (the driver may not have been and will not be probed as there's no SCM entry in device-tree). Make sure we don't dereference a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null-ptr-deref in f2fs_submit_page_bio() There's issue as follows when concurrently installing the f2fs.ko module and mounting the f2fs file system: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:__bio_alloc+0x2fb/0x6c0 [f2fs] Call Trace: <TASK> f2fs_submit_page_bio+0x126/0x8b0 [f2fs] __get_meta_page+0x1d4/0x920 [f2fs] get_checkpoint_version.constprop.0+0x2b/0x3c0 [f2fs] validate_checkpoint+0xac/0x290 [f2fs] f2fs_get_valid_checkpoint+0x207/0x950 [f2fs] f2fs_fill_super+0x1007/0x39b0 [f2fs] mount_bdev+0x183/0x250 legacy_get_tree+0xf4/0x1e0 vfs_get_tree+0x88/0x340 do_new_mount+0x283/0x5e0 path_mount+0x2b2/0x15b0 __x64_sys_mount+0x1fe/0x270 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Above issue happens as the biset of the f2fs file system is not initialized before register "f2fs_fs_type". To address above issue just register "f2fs_fs_type" at the last in init_f2fs_fs(). Ensure that all f2fs file system resources are initialized.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Add sanity NULL check for the default mmap fault handler A driver might allow the mmap access before initializing its runtime->dma_area properly. Add a proper NULL check before passing to virt_to_page() for avoiding a panic.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix file-backed mounts over FUSE syzbot reported a null-ptr-deref in fuse_read_args_fill: fuse_read_folio+0xb0/0x100 fs/fuse/file.c:905 filemap_read_folio+0xc6/0x2a0 mm/filemap.c:2367 do_read_cache_folio+0x263/0x5c0 mm/filemap.c:3825 read_mapping_folio include/linux/pagemap.h:1011 [inline] erofs_bread+0x34d/0x7e0 fs/erofs/data.c:41 erofs_read_superblock fs/erofs/super.c:281 [inline] erofs_fc_fill_super+0x2b9/0x2500 fs/erofs/super.c:625 Unlike most filesystems, some network filesystems and FUSE need unavoidable valid `file` pointers for their read I/Os [1]. Anyway, those use cases need to be supported too. [1] https://docs.kernel.org/filesystems/vfs.html

In the Linux kernel, the following vulnerability has been resolved: nfs/blocklayout: Don't attempt unregister for invalid block device Since commit d869da91cccb ("nfs/blocklayout: Fix premature PR key unregistration") an unmount of a pNFS SCSI layout-enabled NFS may dereference a NULL block_device in: bl_unregister_scsi+0x16/0xe0 [blocklayoutdriver] bl_free_device+0x70/0x80 [blocklayoutdriver] bl_free_deviceid_node+0x12/0x30 [blocklayoutdriver] nfs4_put_deviceid_node+0x60/0xc0 [nfsv4] nfs4_deviceid_purge_client+0x132/0x190 [nfsv4] unset_pnfs_layoutdriver+0x59/0x60 [nfsv4] nfs4_destroy_server+0x36/0x70 [nfsv4] nfs_free_server+0x23/0xe0 [nfs] deactivate_locked_super+0x30/0xb0 cleanup_mnt+0xba/0x150 task_work_run+0x59/0x90 syscall_exit_to_user_mode+0x217/0x220 do_syscall_64+0x8e/0x160 This happens because even though we were able to create the nfs4_deviceid_node, the lookup for the device was unable to attach the block device to the pnfs_block_dev. If we never found a block device to register, we can avoid this case with the PNFS_BDEV_REGISTERED flag. Move the deref behind the test for the flag.

In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-audmix: Add NULL check in imx_audmix_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in imx_audmix_probe() is not checked. Add NULL check in imx_audmix_probe(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: Add encoder check in hdcp2_get_capability Add encoder check in intel_hdcp2_get_capability to avoid null pointer error.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy() In mtk_crtc_create(), if the call to mbox_request_channel() fails then we set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation, we do not call cmdq_pkt_create(). During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan" is NULL first before calling cmdq_pkt_destroy(). Calling cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and it will result in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: mm: fix NULL pointer dereference in alloc_pages_bulk_noprof We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in alloc_pages_bulk_noprof() when the task is migrated between cpusets. When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be &current->mems_allowed. when first_zones_zonelist() is called to find preferred_zoneref, the ac->nodemask may be modified concurrently if the task is migrated between different cpusets. Assuming we have 2 NUMA Node, when traversing Node1 in ac->zonelist, the nodemask is 2, and when traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the ac->preferred_zoneref points to NULL zone. In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading to NULL pointer dereference. __alloc_pages_noprof() fixes this issue by checking NULL pointer in commit ea57485af8f4 ("mm, page_alloc: fix check for NULL preferred_zone") and commit df76cee6bbeb ("mm, page_alloc: remove redundant checks from alloc fastpath"). To fix it, check NULL pointer for preferred_zoneref->zone.

In the Linux kernel, the following vulnerability has been resolved: phy: realtek: usb: fix NULL deref in rtk_usb3phy_probe In rtk_usb3phy_probe() devm_kzalloc() may return NULL but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint Patch series "nilfs2: fix null-ptr-deref bugs on block tracepoints". This series fixes null pointer dereference bugs that occur when using nilfs2 and two block-related tracepoints. This patch (of 2): It has been reported that when using "block:block_touch_buffer" tracepoint, touch_buffer() called from __nilfs_get_folio_block() causes a NULL pointer dereference, or a general protection fault when KASAN is enabled. This happens because since the tracepoint was added in touch_buffer(), it references the dev_t member bh->b_bdev->bd_dev regardless of whether the buffer head has a pointer to a block_device structure. In the current implementation, the block_device structure is set after the function returns to the caller. Here, touch_buffer() is used to mark the folio/page that owns the buffer head as accessed, but the common search helper for folio/page used by the caller function was optimized to mark the folio/page as accessed when it was reimplemented a long time ago, eliminating the need to call touch_buffer() here in the first place. So this solves the issue by eliminating the touch_buffer() call itself.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid null_ptr_deref in vmw_framebuffer_surface_create_handle The 'vmw_user_object_buffer' function may return NULL with incorrect inputs. To avoid possible null pointer dereference, add a check whether the 'bo' is NULL in the vmw_framebuffer_surface_create_handle.