Multiple vulnerabilities in Cisco Firepower Management Center (FMC) Software and Cisco Firepower User Agent Software could allow an attacker to access a sensitive part of an affected system with a high-privileged account. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Telnet service of Cisco Small Business RV110W Wireless-N VPN Firewall Routers could allow an unauthenticated, remote attacker to take full control of the device with a high-privileged account. The vulnerability exists because a system account has a default and static password. An attacker could exploit this vulnerability by using this default account to connect to the affected system. A successful exploit could allow the attacker to gain full control of an affected device.

A vulnerability in Cisco Virtual Wide Area Application Services (vWAAS) with Cisco Enterprise NFV Infrastructure Software (NFVIS)-bundled images for Cisco ENCS 5400-W Series and CSP 5000-W Series appliances could allow an unauthenticated, remote attacker to log into the NFVIS CLI of an affected device by using accounts that have a default, static password. The vulnerability exists because the affected software has user accounts with default, static passwords. An attacker with access to the NFVIS CLI of an affected device could exploit this vulnerability by logging into the CLI. A successful exploit could allow the attacker to access the NFVIS CLI with administrator privileges.

A vulnerability in the implementation of Border Gateway Protocol (BGP) Message Digest 5 (MD5) authentication in Cisco NX-OS Software could allow an unauthenticated, remote attacker to bypass MD5 authentication and establish a BGP connection with the device. The vulnerability occurs because the BGP MD5 authentication is bypassed if the peer does not have MD5 authentication configured, the NX-OS device does have BGP MD5 authentication configured, and the NX-OS BGP virtual routing and forwarding (VRF) name is configured to be greater than 19 characters. An attacker could exploit this vulnerability by attempting to establish a BGP session with the NX-OS peer. A successful exploit could allow the attacker to establish a BGP session with the NX-OS device without MD5 authentication. The Cisco implementation of the BGP protocol accepts incoming BGP traffic only from explicitly configured peers. To exploit this vulnerability, an attacker must send the malicious packets over a TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the affected system’s trusted network.

A vulnerability in Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to log in to the CLI of an affected system by using the SCP User account (scpuser), which has default user credentials. The vulnerability is due to the presence of a documented default account with an undocumented default password and incorrect permission settings for that account. Changing the default password for this account is not enforced during the installation of the product. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the scpuser account. This includes full read and write access to the system's database.

A vulnerability in the Cisco FindIT Network Management Software virtual machine (VM) images could allow an unauthenticated, local attacker who has access to the VM console to log in to the device with a static account that has root privileges. The vulnerability is due to the presence of an account with static credentials in the underlying Linux operating system. An attacker could exploit this vulnerability by logging in to the command line of the affected VM with the static account. A successful exploit could allow the attacker to log in with root-level privileges. This vulnerability affects only Cisco FindIT Network Manager and Cisco FindIT Network Probe Release 1.1.4 if these products are using Cisco-supplied VM images. No other releases or deployment models are known to be vulnerable.

A vulnerability in the management web interface of Cisco Network Assurance Engine (NAE) could allow an unauthenticated, local attacker to gain unauthorized access or cause a Denial of Service (DoS) condition on the server. The vulnerability is due to a fault in the password management system of NAE. An attacker could exploit this vulnerability by authenticating with the default administrator password via the CLI of an affected server. A successful exploit could allow the attacker to view potentially sensitive information or bring the server down, causing a DoS condition. This vulnerability affects Cisco Network Assurance Engine (NAE) Release 3.0(1). The default password condition only affects new installations of Release 3.0(1).

A vulnerability in motherboard console ports of line cards for Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to access an affected device's operating system. The vulnerability exists because an engineering console port is available on the motherboard of the affected line cards. An attacker could exploit this vulnerability by physically connecting to the console port on the line card. A successful exploit could allow the attacker to gain full access to the affected device's operating system. This vulnerability affects only Cisco ASR 1000 Series Routers that have removable line cards and Cisco cBR-8 Converged Broadband Routers, if they are running certain Cisco IOS XE 3.16 through 16.5 releases. Cisco Bug IDs: CSCvc65866, CSCve77132.

The Cisco AMP For Endpoints application allows an authenticated, local attacker to access a static key value stored in the local application software. The vulnerability is due to the use of a static key value stored in the application used to encrypt the connector protection password. An attacker could exploit this vulnerability by gaining local, administrative access to a Windows host and stopping the Cisco AMP for Endpoints service. Cisco Bug IDs: CSCvg42904.

A vulnerability in Cisco Umbrella Insights Virtual Appliances 2.1.0 and earlier could allow an authenticated, local attacker to log in to an affected virtual appliance with root privileges. The vulnerability is due to the presence of default, static user credentials for an affected virtual appliance. An attacker could exploit this vulnerability by using the hypervisor console to connect locally to an affected system and then using the static credentials to log in to an affected virtual appliance. A successful exploit could allow the attacker to log in to the affected appliance with root privileges. Cisco Bug IDs: CSCvg31220.

A vulnerability in authentication mechanism of Cisco Software-Defined Application Visibility and Control (SD-AVC) on Cisco vManage could allow an unauthenticated, remote attacker to access the GUI of Cisco SD-AVC using a default static username and password combination. This vulnerability exists because the GUI is accessible on self-managed cloud installations or local server installations of Cisco vManage. An attacker could exploit this vulnerability by accessing the exposed GUI of Cisco SD-AVC. A successful exploit could allow the attacker to view managed device names, SD-AVC logs, and SD-AVC DNS server IP addresses.

A vulnerability in the key-based SSH authentication mechanism of Cisco Policy Suite could allow an unauthenticated, remote attacker to log in to an affected system as the root user. This vulnerability is due to the re-use of static SSH keys across installations. An attacker could exploit this vulnerability by extracting a key from a system under their control. A successful exploit could allow the attacker to log in to an affected system as the root user.

A vulnerability in the Cisco Common Services Platform Collector (CSPC) could allow an unauthenticated, remote attacker to access an affected device by using an account that has a default, static password. This account does not have administrator privileges. The vulnerability exists because the affected software has a user account with a default, static password. An attacker could exploit this vulnerability by remotely connecting to the affected system using this account. A successful exploit could allow the attacker to log in to the CSPC using the default account. For Cisco CSPC 2.7.x, Cisco fixed this vulnerability in Release 2.7.4.6. For Cisco CSPC 2.8.x, Cisco fixed this vulnerability in Release 2.8.1.2.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper session management on affected DCNM software. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

KNX ETS5 through 5.7.6 uses the hard-coded password ETS5Password, with a salt value of Ivan Medvedev, allowing local users to read project information. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

A hardcoded key in Ivanti Workspace Control before version 10.19.0.0 allows a local authenticated attacker to decrypt stored SQL credentials.

Azure Stack HCI Elevation of Privilege Vulnerability

The GalaxyClientService component of GOG Galaxy runs with elevated SYSTEM privileges in a Windows environment. Due to the software shipping with embedded, static RSA private key, an attacker with this key material and local user permissions can effectively send any operating system command to the service for execution in this elevated context. The service listens for such commands on a locally-bound network port, localhost:9978. A Metasploit module has been published which exploits this vulnerability. This issue affects the 2.0.x branch of the software (2.0.12 and earlier) as well as the 1.2.x branch (1.2.64 and earlier). A fix was issued for the 2.0.x branch of the affected software.

A hardcoded key in Ivanti Workspace Control before version 10.19.10.0 allows a local authenticated attacker to decrypt stored SQL credentials.

A Use of Hardcoded Credentials vulnerability exists in AquaView versions 1.60, 7.x, and 8.x that could allow an authenticated local attacker to manipulate users and system settings.