IBM Robotic Process Automation 21.0.0, 21.0.1, and 21.0.2 is vulnerable to insufficiently protected credentials for users created via a bulk upload. IBM X-Force ID: 228888.

A vulnerability in the configuration archive functionality of Cisco DNA Center could allow any privilege-level authenticated, remote attacker to obtain the full unmasked running configuration of managed devices. The vulnerability is due to the configuration archives files being stored in clear text, which can be retrieved by various API calls. An attacker could exploit this vulnerability by authenticating to the device and executing a series of API calls. A successful exploit could allow the attacker to retrieve the full unmasked running configurations of managed devices.

A vulnerability in the disaster recovery feature of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to gain unauthorized access to user credentials. This vulnerability exists because access to API endpoints is not properly restricted. An attacker could exploit this vulnerability by sending a request to an API endpoint. A successful exploit could allow the attacker to gain unauthorized access to administrative credentials that could be used in further attacks.

Browsing the path: http://ip/wifi_ap_pata_get.cmd, will show in the name of the existing access point on the component, and a password in clear text.

Dell Wyse Management Suite 3.6.1 and below contains a Sensitive Data Exposure vulnerability. A low privileged malicious user could potentially exploit this vulnerability in order to obtain credentials. The attacker may be able to use the exposed credentials to access the target device and perform unauthorized actions.

Grafana is an open source observability and data visualization platform. Versions of Grafana for endpoints prior to 9.1.8 and 8.5.14 could leak authentication tokens to some destination plugins under some conditions. The vulnerability impacts data source and plugin proxy endpoints with authentication tokens. The destination plugin could receive a user's Grafana authentication token. Versions 9.1.8 and 8.5.14 contain a patch for this issue. As a workaround, do not use API keys, JWT authentication, or any HTTP Header based authentication.

Prosys OPC UA Simulation Server version prior to v5.3.0-64 and UA Modbus Server versions 1.4.18-5 and prior do not sufficiently protect credentials, which could allow an attacker to obtain user credentials and gain access to system data.

In Omron CS series, CJ series, and CP series PLCs through 2022-05-18, the password for access to the Web UI is stored in memory area D1449...D1452 and can be read out using the Omron FINS protocol without any further authentication.

Konica Minolta bizhub MFP devices before 2022-04-14 use cleartext password storage for the /var/log/nginx/html/ADMINPASS and /etc/shadow files.

A vulnerability, which was classified as problematic, was found in SourceCodester Guest Management System. Affected is an unknown function. The manipulation leads to cleartext storage of passwords in the database. The identifier of this vulnerability is VDB-206400.

Insufficiently Protected Credentials: An authenticated user with debug privileges can retrieve stored Nessus policy credentials from the “nessusd” process in cleartext via process dumping. The affected products are all versions of Nessus Essentials and Professional. The vulnerability allows an attacker to access credentials stored in Nessus scanners, potentially compromising its customers’ network of assets.

A flaw was found in ovirt-engine, which leads to the logging of plaintext passwords in the log file when using otapi-style. This flaw allows an attacker with sufficient privileges to read the log file, leading to confidentiality loss.

Jenkins instant-messaging Plugin 1.41 and earlier stores passwords for group chats unencrypted in the global configuration file of plugins based on Jenkins instant-messaging Plugin on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

HCL VersionVault Express exposes administrator credentials.

Jenkins Proxmox Plugin 0.5.0 and earlier stores the Proxmox Datacenter password unencrypted in the global config.xml file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

Jenkins Harvest SCM Plugin 0.5.1 and earlier stores passwords unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

The BestWebSoft's Like & Share WordPress plugin before 2.74 discloses the content of password protected posts to unauthenticated users via a meta tag

The App Settings (/admin/app) page in GROWI versions prior to v6.0.6 stores sensitive information in cleartext form. As a result, the Secret access key for external service may be obtained by an attacker who can access the App Settings page.

Jenkins Jira Plugin 3.11 and earlier does not set the appropriate context for credentials lookup, allowing attackers with Item/Configure permission to access and capture credentials they are not entitled to.

BigFix Web Reports authorized users may see SMTP credentials in clear text.

Aquaforest TIFF Server 4.0 allows Unauthenticated SMB Hash Capture via UNC.

During installation or upgrade to Software House C•CURE 9000 v2.70 and American Dynamics victor Video Management System v5.2, the credentials of the user used to perform the installation or upgrade are logged in a file. The install log file persists after the installation.

Jenkins GitLab Authentication Plugin 1.13 and earlier stores the GitLab client secret unencrypted in the global config.xml file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

The Motorola MOSCAD Toolbox software through 2022-05-02 relies on a cleartext password. It utilizes an MDLC driver to communicate with MOSCAD/ACE RTUs for engineering purposes. Access to these communications is protected by a password stored in cleartext in the wmdlcdrv.ini driver configuration file. In addition, this password is used for access control to MOSCAD/STS projects protected with the Legacy Password feature. In this case, an insecure CRC of the password is present in the project file: this CRC is validated against the password in the driver configuration file.

Jenkins Pipeline SCM API for Blue Ocean Plugin 1.25.3 and earlier allows attackers with Job/Configure permission to access credentials with attacker-specified IDs stored in the private per-user credentials stores of any attacker-specified user in Jenkins.

Insufficiently protected credentials in the Intel(R) Datacenter Group Event iOS application, all versions, may allow an unauthenticated user to potentially enable information disclosure via network access.

A logic error in Nextcloud Server 19.0.0 caused a plaintext storage of the share password when it was given on the initial create API call.

Veritas System Recovery (VSR) 18 and 21 stores a network destination password in the Windows registry during configuration of the backup configuration. This could allow a Windows user (who has sufficient privileges) to access a network file system that they were not authorized to access.

Jenkins Vmware vRealize CodeStream Plugin 1.2 and earlier stores passwords unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Extended Read permission, or access to the Jenkins controller file system.

The Archer RSS feed integration for Archer 6.x through 6.9 SP1 (6.9.1.0) is affected by an insecure credential storage vulnerability. A malicious attacker may obtain access to credential information to use it in further attacks.

Jenkins dbCharts Plugin 0.5.2 and earlier stores JDBC connection passwords unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

A CWE-312: Cleartext Storage of Sensitive Information vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow an attacker to intercept traffic and read configuration data.

An issue was discovered in Newland Nquire 1000 Interactive Kiosk version NQ1000-II_G_V1.00.011, allows remote attackers to obtain sensitive information via cleartext credential storage in backup.htm component.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC3600 up to 1.0.22. This affects the function geteasycfg of the file /cgi-bin/lighttpd.cgi of the component Web Management Interface. The manipulation of the argument Password leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

register.ghp in EFS Software Easy Chat Server versions 2.0 to 3.1 allows remote attackers to discover passwords by sending the username parameter in conjunction with an empty password parameter, and reading the HTML source code of the response.

Cleartext Storage of Sensitive Information vulnerability in Mitsubishi Electric GX Works3 versions from 1.000A to 1.095Z and Mitsubishi Electric MX OPC UA Module Configurator-R versions 1.08J and prior allows a remote unauthenticated attacker to disclose sensitive information. As a result, unauthenticated attackers can gain unauthorized access to the MELSEC CPU module and the MELSEC OPC UA server module.

The HPE BlueData EPIC Software Platform version 4.0 and HPE Ezmeral Container Platform 5.0 use an insecure method of handling sensitive Kerberos passwords that is susceptible to unauthorized interception and/or retrieval. Specifically, they display the kdc_admin_password in the source file of the url "/bdswebui/assignusers/".

SepCity Classified Ads stores the admin password in cleartext in data/classifieds.mdb, which allows context-dependent attackers to obtain sensitive information.

The debug interface of Goldshell ASIC Miners v2.2.1 and below was discovered to be exposed publicly on the web interface, allowing attackers to access passwords and other sensitive information in plaintext.

Smb4K before 1.1.1 allows remote attackers to obtain credentials via vectors related to the cuid option in the "Additional options" line edit.

Since version 5.2.0, when using deferrable mode with the path of a Kubernetes configuration file for authentication, the Airflow worker serializes this configuration file as a dictionary and sends it to the triggerer by storing it in metadata without any encryption. Additionally, if used with an Airflow version between 2.3.0 and 2.6.0, the configuration dictionary will be logged as plain text in the triggerer service without masking. This allows anyone with access to the metadata or triggerer log to obtain the configuration file and use it to access the Kubernetes cluster. This behavior was changed in version 7.0.0, which stopped serializing the file contents and started providing the file path instead to read the contents into the trigger. Users are recommended to upgrade to version 7.0.0, which fixes this issue.

Brocade SANnav before Brocade SANvav v. 2.2.0.2 and Brocade SANanv v.2.1.1.8 logs the Brocade Fabric OS switch password in plain text in asyncjobscheduler-manager.log

A cleartext storage of sensitive information vulnerability in FortiOS command line interface in versions 6.2.4 and earlier and FortiProxy 2.0.0, 1.2.9 and earlier may allow an authenticated attacker to obtain sensitive information such as users passwords by connecting to FortiGate CLI and executing the "diag sys ha checksum show" command.

CodeIgniter Shield is an authentication and authorization provider for CodeIgniter 4. The `secretKey` value is an important key for HMAC SHA256 authentication and in affected versions was stored in the database in cleartext form. If a malicious person somehow had access to the data in the database, they could use the key and secretKey for HMAC SHA256 authentication to send requests impersonating that corresponding user. This issue has been addressed in version 1.0.0-beta.8. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Missing Password Field Masking vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Agent component).This issue affects Hitachi Device Manager: before 8.8.5-04.

The Nautobot Device Onboarding plugin uses the netmiko and NAPALM libraries to simplify the onboarding process of a new device into Nautobot down to, in many cases, an IP Address and a Location. Starting in version 2.0.0 and prior to version 3.0.0, credentials provided to onboarding task are visible via Job Results from an execution of an Onboarding Task. Version 3.0.0 fixes this issue; no known workarounds are available. Mitigation recommendations include deleting all Job Results for any onboarding task to remove clear text credentials from database entries that were run while on v2.0.X, upgrading to v3.0.0, and rotating any exposed credentials.

IBM CICS Transaction Gateway for Multiplatforms 9.2 and 9.3 transmits or stores authentication credentials, but it uses an insecure method that is susceptible to unauthorized interception and/or retrieval.

IBM Spectrum Protect Plus 10.1.0 through 10.1.6 may include sensitive information in its URLs increasing the risk of such information being caputured by an attacker. IBM X-Force ID: 193654.

Implemented protections on AWS credentials that were not properly protected.

Jenkins Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows attackers able to control agent processes to retrieve all username/password credentials stored on the Jenkins controller.