An issue was discovered in Zimbra Collaboration (ZCS) 9.0 and 10.0. The zmmailboxdmgr binary, a component of ZCS, is intended to be executed by the zimbra user with root privileges for specific mailbox operations. However, an attacker can escalate privileges from the zimbra user to root, because of improper handling of input arguments. An attacker can execute arbitrary commands with elevated privileges, leading to local privilege escalation.

An issue was discovered in Zimbra Collaboration (ZCS) 8.8.x and 9.x (e.g., 8.8.15). The Sudo configuration permits the zimbra user to execute the NGINX binary as root with arbitrary parameters. As part of its intended functionality, NGINX can load a user-defined configuration file, which includes plugins in the form of .so files, which also execute as root.

Zimbra's sudo configuration permits the zimbra user to execute the zmslapd binary as root with arbitrary parameters. As part of its intended functionality, zmslapd can load a user-defined configuration file, which includes plugins in the form of .so files, which also execute as root.

Multiple vulnerabilities in the restricted shell of Cisco Evolved Programmable Network Manager (EPNM), Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure could allow an authenticated, local attacker to escape the restricted shell and gain root privileges on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Exim 4.72 and earlier allows local users to gain privileges by leveraging the ability of the exim user account to specify an alternate configuration file with a directive that contains arbitrary commands, as demonstrated by the spool_directory directive.

A vulnerability classified as critical has been found in Eluktronics Control Center 5.23.51.41. Affected is an unknown function of the file \AiStoneService\MyControlCenter\Command of the component Powershell Script Handler. The manipulation leads to command injection. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in the firmware_update command, in the device's restricted telnet interface, allows an authenticated attacker to execute arbitrary commands as root.

Terminology 0.7.0 allows remote attackers to execute arbitrary commands via escape sequences that modify the window title and then are written to the terminal, a similar issue to CVE-2003-0063.

KiTTY versions 0.76.1.13 and before is vulnerable to command injection via the filename variable, occurs due to insufficient input sanitization and validation, failure to escape special characters, and insecure system calls (at lines 2369-2390). This allows an attacker to add inputs inside the filename variable, leading to arbitrary code execution.

Pymatgen (Python Materials Genomics) is an open-source Python library for materials analysis. A critical security vulnerability exists in the `JonesFaithfulTransformation.from_transformation_str()` method within the `pymatgen` library prior to version 2024.2.20. This method insecurely utilizes `eval()` for processing input, enabling execution of arbitrary code when parsing untrusted input. Version 2024.2.20 fixes this issue.

Roo Code is an AI-powered autonomous coding agent that lives in users' editors. In versions 3.23.18 and below, RooCode does not validate line breaks (\n) in its command input, allowing potential bypass of the allow-list mechanism. The project appears to lack parsing or validation logic to prevent multi-line command injection. When commands are evaluated for execution, only the first line or token may be considered, enabling attackers to smuggle additional commands in subsequent lines. This is fixed in version 3.23.19.

uploadsm in ChargePoint Home Flex 5.5.4.13 does not validate a user-controlled string for bz2 decompression, which allows command execution as the nobody user.

A vulnerability in the ConfD CLI and the Cisco Crosswork Network Services Orchestrator CLI could allow an authenticated, low-privileged, local attacker to read and write arbitrary files as root on the underlying operating system. This vulnerability is due to improper authorization enforcement when specific CLI commands are used. An attacker could exploit this vulnerability by executing an affected CLI command with crafted arguments. A successful exploit could allow the attacker to read or write arbitrary files on the underlying operating system with the privileges of the root user.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in WatchGuard AuthPoint Password Manager on MacOS allows an a adversary with local access to execute code under the context of the AuthPoint Password Manager application. This issue affects AuthPoint Password Manager for MacOS versions before 1.0.6.

In Helix Sync versions prior to 2024.1, a local command injection was identified. Reported by Bryan Riggins.  

Command injection in IrGraph.draw in paddlepaddle/paddle 2.6.0

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before executing GPINT commands [Why] DMCUB can be in idle when we attempt to interface with the HW through the GPINT mailbox resulting in a system hang. [How] Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep sequence. If the GPINT executes successfully then DMCUB will be put back into sleep after the optional response is returned. It functions similar to the inbox command interface.

Shell Injection vulnerability GL.iNet A1300 v4.4.6, AX1800 v4.4.6, AXT1800 v4.4.6, MT3000 v4.4.6, MT2500 v4.4.6, MT6000 v4.5.0, MT1300 v4.3.7, MT300N-V2 v4.3.7, AR750S v4.3.7, AR750 v4.3.7, AR300M v4.3.7, and B1300 v4.3.7., allows local attackers to execute arbitrary code via the get_system_log and get_crash_log functions of the logread module, as well as the upgrade_online function of the upgrade module.

HPE OneView may allow command injection with local privilege escalation.

A command injection vulnerability in command processing on Juniper Networks Junos OS Evolved allows an attacker with authenticated CLI access to be able to bypass configured access protections to execute arbitrary shell commands within the context of the current user. The vulnerability allows an attacker to bypass command authorization restrictions assigned to their specific user account and execute commands that are available to the privilege level for which the user is assigned. For example, a user that is in the super-user login class, but restricted to executing specific CLI commands could exploit the vulnerability to execute any other command available to an unrestricted admin user. This vulnerability does not increase the privilege level of the user, but rather bypasses any CLI command restrictions by allowing full access to the shell. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S1-EVO; All versions of 21.1-EVO and 21.2-EVO.

A vulnerability, which was classified as critical, was found in kylin-system-updater up to 1.4.20kord on Ubuntu Kylin. Affected is the function InstallSnap of the component Update Handler. The manipulation leads to command injection. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-222600.

BPF JIT compilers in the Linux kernel through 5.11.12 have incorrect computation of branch displacements, allowing them to execute arbitrary code within the kernel context. This affects arch/x86/net/bpf_jit_comp.c and arch/x86/net/bpf_jit_comp32.c.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.

The issue was addressed with improved memory handling. This issue is fixed in iOS 17 and iPadOS 17, macOS Sonoma 14, watchOS 10, tvOS 17. An app may be able to execute arbitrary code with kernel privileges.

The Baseboard Management Controller (BMC) firmware in HPE Apollo 70 System prior to version 3.0.14.0 has a command injection vulnerability in libifc.so websetdefaultlangcfg function.

Dell ThinOS 2411 and prior, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary code execution.

A vulnerability in the command-line interface (CLI) in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

Dell SmartFabric OS10 Software, version(s) 10.5.4.x, 10.5.5.x, 10.5.6.x, 10.6.0.x, contain(s) an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution.

Dell SmartFabric OS10 Software, version(s) 10.5.4.x, 10.5.5.x, 10.5.6.x, 10.6.0.x, contain(s) an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to execution of commands with elevated privileges.

An issue was discovered in SaltStack Salt before 3002.5. The minion's restartcheck is vulnerable to command injection via a crafted process name. This allows for a local privilege escalation by any user able to create a files on the minion in a non-blacklisted directory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

NFX Series devices using Juniper Networks Junos OS are susceptible to a local command execution vulnerability thereby allowing an attacker to elevate their privileges via the Junos Device Management Daemon (JDMD) process. This issue affects Juniper Networks Junos OS on NFX Series 17.2 version 17.2R1 and later versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S3; 19.2 version 19.1R2 and later versions prior to 19.2R3; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2-S2. 19.4 versions 19.4R3 and above. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R1. This issue does not affect the JDMD as used by Junos Node Slicing such as External Servers use in conjunction with Junos Node Slicing and In-Chassis Junos Node Slicing on MX480, MX960, MX2008, MX2010, MX2020.

In screencap, there is a possible command injection due to improper input validation. This could lead to local escalation of privilege in a system process with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-123230379

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability, which was classified as critical, has been found in exelban stats up to 2.11.21. This issue affects the function shouldAcceptNewConnection of the component XPC Service. The manipulation leads to command injection. It is possible to launch the attack on the local host. Upgrading to version 2.11.22 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability has been found in the CPython `venv` module and CLI where path names provided when creating a virtual environment were not quoted properly, allowing the creator to inject commands into virtual environment "activation" scripts (ie "source venv/bin/activate"). This means that attacker-controlled virtual environments are able to run commands when the virtual environment is activated. Virtual environments which are not created by an attacker or which aren't activated before being used (ie "./venv/bin/python") are not affected.

com.perimeter81.osx.HelperTool in Perimeter81 10.0.0.19 on macOS allows Local Privilege Escalation (to root) via shell metacharacters in usingCAPath.

virtualenv before 20.26.6 allows command injection through the activation scripts for a virtual environment. Magic template strings are not quoted correctly when replacing. NOTE: this is not the same as CVE-2024-9287.

An attacker with local access the to medical office computer can escalate his Windows user privileges to "NT AUTHORITY\SYSTEM" by exploiting a command injection vulnerability in the Elefant Update Service. The command injection can be exploited by communicating with the Elefant Update Service which is running as "SYSTEM" via Windows Named Pipes.The Elefant Software Updater (ESU) consists of two components. An ESU service which runs as "NT AUTHORITY\SYSTEM" and an ESU tray client which communicates with the service to update or repair the installation and is running with user permissions. The communication is implemented using named pipes. A crafted message of type "MessageType.SupportServiceInfos" can be sent to the local ESU service to inject commands, which are then executed as "NT AUTHORITY\SYSTEM".

Dell SmartFabric OS10 Software, version(s) 10.5.4.x, 10.5.5.x, 10.5.6.x, 10.6.0.x, contain(s) an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution.

An arbitrary file creation vulnerability exists in PaperCut NG/MF that only affects Windows servers with Web Print enabled. This specific flaw exists within the image-handler process, which can incorrectly create files that don’t exist when a maliciously formed payload is provided. This can lead to local privilege escalation. Note: This CVE has been split into two (CVE-2024-4712 and CVE-2024-8405) and it’s been rescored with a "Privileges Required (PR)" rating of low, and “Attack Complexity (AC)” rating of low, reflecting the worst-case scenario where an Administrator has granted local login access to standard network users on the host server.

All versions of the package keep-module-latest are vulnerable to Command Injection due to missing input sanitization or other checks and sandboxes being employed to the installModule function. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.

All versions of the package bwm-ng are vulnerable to Command Injection due to improper input sanitization in the 'check' function in the bwm-ng.js file. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.