D-Link DIR-820 routers contain an OS command injection vulnerability that allows a remote, unauthenticated attacker to escalate privileges to root via a crafted payload with the ping_addr parameter to ping.ccp.
The impacted product is end-of-life (EoL) and/or end-of-service (EoS). Users should discontinue utilization of the product.
An issue was discovered in D-Link DIR816_A1_FW101CNB04 750m11ac wireless router, The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.
An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.
Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the FILECODE parameter on login.
On the D-Link DIR-615 before v20.12PTb04, once authenticated, this device identifies the user based on the IP address of his machine. By spoofing the IP address belonging to the victim's host, an attacker might be able to take over the administrative session without being prompted for authentication credentials. An attacker can get the victim's and router's IP addresses by simply sniffing the network traffic. Moreover, if the victim has web access enabled on his router and is accessing the web interface from a different network that is behind the NAT/Proxy, an attacker can sniff the network traffic to know the public IP address of the victim's router and take over his session as he won't be prompted for credentials.
D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. Affected is an unknown function of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument system leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-259284. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This vulnerability affects unknown code of the file /firewall/urlblist.php. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-264532. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DAR-7000-40 V31R02B1413C. Affected by this issue is some unknown functionality of the file /useratte/resmanage.php. The manipulation of the argument file leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-264530 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DAR-7000-40 V31R02B1413C. This affects an unknown part of the file /url/url.php. The manipulation of the argument file_upload leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-264531. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
A stack-based buffer overflow vulnerability in the my_cgi.cgi component of certain D-Link devices, including the DSP-W215 version 1.02, can be exploited via a specially crafted HTTP POST request to the /common/info.cgi endpoint. This flaw enables an unauthenticated attacker to achieve remote code execution with system-level privileges.
A weakness has been identified in D-Link DIR-823X 250416. Affected by this issue is the function sub_412E7C of the file /goform/set_wifidog_settings. Executing a manipulation of the argument wd_enable can lead to command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.
A stack overflow vulnerability exists in the sub_402280 function of the HNAP service of D-Link DCS-960L 1.09, allowing an attacker to execute arbitrary code.
D-Link DIR-865L has PHP File Inclusion in the router xml file.
A vulnerability was identified in D-Link DIR-825 2.10. Affected by this vulnerability is the function get_ping_app_stat of the file ping_response.cgi of the component httpd. The manipulation of the argument ping_ipaddr leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability classified as critical was found in D-Link DI-8100 1.0. This vulnerability affects the function sprintf of the file /upnp_ctrl.asp of the component jhttpd. The manipulation of the argument remove_ext_proto/remove_ext_port leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. The "user" account has a blank password.
A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability, which was classified as critical, has been found in D-Link DIR-825 2.10. This issue affects the function sub_410DDC of the file switch_language.cgi of the component httpd. The manipulation of the argument Language leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formAutoDetecWAN_wizard4.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formLogin.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSchedule.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formAdvNetwork.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetWAN_Wizard55.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetWAN_Wizard51.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetWizardSelectMode.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetWANType_Wizard5.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetDomainFilter.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetPortTr.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetQoS.
D-Link DIR-513 version 1.10 contains a critical-level vulnerability. When processing POST requests related to verification codes in /goform/formLogin, it enters /goform/getAuthCode but fails to filter the value of the FILECODE parameter, resulting in a path traversal vulnerability.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetDDNS.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetMACFilter.
Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the goform/formDeviceReboot.
The web service of certain models of D-Link wireless routers contains a Stack-based Buffer Overflow vulnerability, which allows unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.
The web service of certain models of D-Link wireless routers contains a Stack-based Buffer Overflow vulnerability, which allows unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.
Certain models of D-Link wireless routers have a hidden functionality where the telnet service is enabled when the WAN port is plugged in. Unauthorized remote attackers can log in and execute OS commands using hard-coded credentials.
D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the lanip parameter in /goform/setNetworkLan.
D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the addurlfilter parameter in /goform/websURLFilter.
D-Link DI_8004W 16.07.26A1 contains a command execution vulnerability in the jhttpd upgrade_filter_asp function.
D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via msp_info.htm.
A vulnerability was found in D-Link DI-8200G 17.12.20A1. This affects an unknown function of the file /upgrade_filter.asp. The manipulation of the argument path results in command injection. The attack may be performed from remote. The exploit has been made public and could be used.
D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the upgrade_filter_asp function.
D-Link DI_8004W 16.07.26A1 contains a command execution vulnerability in jhttpd msp_info_htm function.
An issue was discovered on D-Link DAP-1360 revision F devices. Remote attackers can start a telnet service without authorization via an undocumented HTTP request. Although this is the primary vulnerability, the impact depends on the firmware version. Versions 609EU through 613EUbeta were tested. Versions through 6.12b01 have weak root credentials, allowing an attacker to gain remote root access. After 6.12b01, the root credentials were changed but the telnet service can still be started without authorization.
In D-Link DIR-860L v2.03, there is a buffer overflow vulnerability due to the lack of length verification for the SID field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.
D-Link DSL-G2452DG HW:T1\\tFW:ME_2.00 was discovered to contain insecure permissions.
D-Link DIR-820LW REVB FIRMWARE PATCH 2.03.B01_TC contains hardcoded credentials in the Telnet service, enabling attackers to log in remotely to the Telnet service and perform arbitrary commands.
There are some web interfaces without authentication requirements on D-Link DIR-868L B1-2.03 and DIR-817LW A1-1.04 routers. An attacker can get the router's username and password (and other information) via a DEVICE.ACCOUNT value for SERVICES in conjunction with AUTHORIZED_GROUP=1%0a to getcfg.php. This could be used to control the router remotely.