CWE-287: Improper Authentication vulnerability exists that could cause unauthorized tampering of device configuration over NFC communication.
A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could result in remote code execution or the crash of HTTPs stack which is used for the device Web HMI. Affected Products: Easergy P5 (V01.401.102 and prior)
A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could lead to a buffer overflow causing program crashes and arbitrary code execution when specially crafted packets are sent to the device over the network. Protection functions and tripping function via GOOSE can be impacted. Affected Product: Easergy P5 (All firmware versions prior to V01.401.101)
A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could lead to a buffer overflow causing program crashes and arbitrary code execution when specially crafted packets are sent to the device over the network. Protection functions and tripping function via GOOSE can be impacted. Affected Product: Easergy P3 (All versions prior to V30.205)
A CWE-200: Information Exposure vulnerability exists which could allow a session hijack when the door panel is communicating with the door. Affected Product: Ritto Wiser Door (All versions)
An Authentication Bypass by Capture-Replay issue was discovered in Schneider Electric Modicon Modbus Protocol. Sensitive information is transmitted in cleartext in the Modicon Modbus protocol, which may allow an attacker to replay the following commands: run, stop, upload, and download.
Schneider Electric Modicon Quantum PLC does not perform authentication between the Unity software and PLC, which allows remote attackers to cause a denial of service or possibly execute arbitrary code via unspecified vectors.
A CWE-287: Improper Authentication vulnerability exists in PowerLogic PM55xx, PowerLogic PM8ECC, PowerLogic EGX100 and PowerLogic EGX300 (see security notification for version infromation) that could cause loss of connectivity to the device via Modbus TCP protocol when an attacker sends a specially crafted HTTP request.
A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow an unauthenticated, remote attacker to bypass authentication and get the administrator privileges.
An authorization bypass vulnerability exists in Schneider Electric's Modicon M340, Modicon Premium, Modicon Quantum PLC, BMXNOR0200. Requests to CGI functions allow malicious users to bypass authorization.
A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow retrieving of specially crafted URLs without authentication that can reveal sensitive information to an attacker.
A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could enable SSH service due to lack of authentication for /login/bin/set_param could enable SSH service.
A CWE-284: Improper Access Control vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause denial of service or potential code execution by overwriting configuration settings of the controller over Modbus.
A Permissions, Privileges, and Access Control vulnerability exists in Schneider Electric's Modicon M221 product (all references, all versions prior to firmware V1.6.2.0). The vulnerability allows unauthorized users to overwrite the original password with their password. If an attacker exploits this vulnerability and overwrite the password, the attacker can upload the original program from the PLC.
CWE-287: Improper Authentication vulnerability exists that could cause Denial of access to the web interface when someone on the local network repeatedly requests the /accessdenied URL.
A CWE-287: Improper Authentication vulnerability exists that could allow an attacker to take over the admin account when an attacker hijacks a session. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
A CWE-287: Improper Authentication vulnerability exists that could allow an attacker to gain control of the device when logging into a web page. Affected Products: C-Bus Network Automation Controller - LSS5500NAC (Versions prior to V1.10.0), Wiser for C-Bus Automation Controller - LSS5500SHAC (Versions prior to V1.10.0), Clipsal C-Bus Network Automation Controller - 5500NAC (Versions prior to V1.10.0), Clipsal Wiser for C-Bus Automation Controller - 5500SHAC (Versions prior to V1.10.0), SpaceLogic C-Bus Network Automation Controller - 5500NAC2 (Versions prior to V1.10.0), SpaceLogic C-Bus Application Controller - 5500AC2 (Versions prior to V1.10.0)
CWE-287: Improper Authentication vulnerability exists that could cause an Authentication Bypass when an unauthorized user without permission rights has physical access to the EPAS-UI computer and is able to reboot the workstation and interrupt the normal boot process.
The ComputePassword function in the Schneider Electric Quantum Ethernet Module on the NOE 771 device (aka the Quantum 140NOE771* module) generates the password for the fwupgrade account by performing a calculation on the MAC address, which makes it easier for remote attackers to obtain access via a (1) ARP request message or (2) Neighbor Solicitation message.
A CWE-287: Improper Authentication vulnerability exists that could cause an attacker to arbitrarily change the behavior of the UPS when a key is leaked and used to upload malicious firmware. Affected Product: APC Smart-UPS Family: SMT Series (SMT Series ID=18: UPS 09.8 and prior / SMT Series ID=1040: UPS 01.2 and prior / SMT Series ID=1031: UPS 03.1 and prior), SMC Series (SMC Series ID=1005: UPS 14.1 and prior / SMC Series ID=1007: UPS 11.0 and prior / SMC Series ID=1041: UPS 01.1 and prior), SCL Series (SCL Series ID=1030: UPS 02.5 and prior / SCL Series ID=1036: UPS 02.5 and prior), SMX Series (SMX Series ID=20: UPS 10.2 and prior / SMX Series ID=23: UPS 07.0 and prior), SRT Series (SRT Series ID=1010/1019/1025: UPS 08.3 and prior / SRT Series ID=1024: UPS 01.0 and prior / SRT Series ID=1020: UPS 10.4 and prior / SRT Series ID=1021: UPS 12.2 and prior / SRT Series ID=1001/1013: UPS 05.1 and prior / SRT Series ID=1002/1014: UPSa05.2 and prior), APC SmartConnect Family: SMT Series (SMT Series ID=1015: UPS 04.5 and prior), SMC Series (SMC Series ID=1018: UPS 04.2 and prior), SMTL Series (SMTL Series ID=1026: UPS 02.9 and prior), SCL Series (SCL Series ID=1029: UPS 02.5 and prior / SCL Series ID=1030: UPS 02.5 and prior / SCL Series ID=1036: UPS 02.5 and prior / SCL Series ID=1037: UPS 03.1 and prior), SMX Series (SMX Series ID=1031: UPS 03.1 and prior)
A CWE-287: Improper Authentication vulnerability exists in the NET55XX Encoder with firmware prior to version 2.1.9.7 which could cause impact to confidentiality, integrity, and availability when a remote attacker crafts a malicious request to the encoder webUI.
A CWE-287: Authentication vulnerability exists in spaceLYnk (all versions before 2.4.0) and Wiser for KNX (all versions before 2.4.0 - formerly known as homeLYnk), which could cause loss of control when an attacker bypasses the authentication.
A CWE-287: Improper Authentication vulnerability exists in a folder within EcoStruxure Geo SCADA Expert (ClearSCADA) -with initial releases before 1 January 2019- which could cause a low privilege user to delete or modify database, setting or certificate files. Those users must have access to the file system of that operating system to exploit this vulnerability. Affected versions in current support includes ClearSCADA 2017 R3, ClearSCADA 2017 R2, and ClearSCADA 2017.
A CWE-287: Improper Authentication vulnerability exists that could allow remote code execution when a malicious file is uploaded. Affected Product: C-Bus Toolkit (V1.15.9 and prior), C-Gate Server (V2.11.7 and prior)
CWE-287: Improper Authentication vulnerability exists which could cause the execution of commands on the webserver without authentication when sending specially crafted HTTP requests.
login.cgi on D-Link DIR-600M devices with firmware 3.04 allows remote attackers to bypass authentication by entering more than 20 blank spaces in the password field during an admin login attempt.
Insufficient security checks exist in the recovery procedure used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. An attacker who is in the same subnetwork of the camera or has remote administrator access can fully compromise the device by performing a firmware recovery using a custom image.
Certain NETGEAR devices are affected by authentication bypass. This affects R6300v2 before 1.0.4.8, R6400 before 1.0.1.20, R6700 before 1.0.1.20, R6900 before 1.0.1.20, R7000 before 1.0.7.10, R7100LG before V1.0.0.32, R7300DST before 1.0.0.52, R7900 before 1.0.1.16, R8000 before 1.0.3.36, R8300 before 1.0.2.94, R8500 before 1.0.2.94, WNDR3400v3 before 1.0.1.12, and WNR3500Lv2 before 1.2.0.40.
In Patient Information Center iX (PICiX) Version B.02, C.02, C.03, and PerformanceBridge Focal Point Version A.01, when an actor claims to have a given identity, the software does not prove or insufficiently proves the claim is correct.
There is an insufficient authentication vulnerability in Huawei Band 2 and Honor Band 3. The band does not sufficiently authenticate the device try to connect to it in certain scenario. Successful exploit could allow the attacker to spoof then connect to the band.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R7000 1.0.11.116_10.2.100 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of SOAP requests. The issue results from the lack of proper authentication verification before performing a password reset. An attacker can leverage this vulnerability to reset the admin password. Was ZDI-CAN-13483.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of multiple NETGEAR routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the mini_httpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-13313.
Improper authentication vulnerability in Tizen bluetooth-frwk prior to Firmware update JUN-2021 Release allows bluetooth attacker to take over the user's bluetooth device without user awareness.
Improper input validation in BLE prior to SMR Jul-2024 Release 1 allows adjacent attackers to trigger abnormal behavior.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-1330 1.10B01 BETA Wi-Fi range extenders. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper handling of cookies. An attacker can leverage this vulnerability to execute arbitrary code on the router. Was ZDI-CAN-9554.
Authentication bypass vulnerability in ACERA 1320 firmware ver.01.26 and earlier, and ACERA 1310 firmware ver.01.26 and earlier allows a network-adjacent unauthenticated attacker who can access the affected product to download configuration files and/or log files, and upload configuration files and/or firmware. They are affected when running in ST(Standalone) mode.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-9470.
Improper authentication for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.
NVIDIA UFM Enterprise, UFM Appliance, and UFM CyberAI contain a vulnerability where an attacker can cause an improper authentication issue by sending a malformed request through the Ethernet management interface. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, denial of service, and information disclosure.
The Bluetooth module of some Huawei Smart Screen products has an identity authentication bypass vulnerability. Successful exploitation of this vulnerability may allow attackers to access restricted functions. Successful exploitation of this vulnerability may allow attackers to access restricted functions.
A vulnerability was found in SATO CL4NX-J Plus 1.13.2-u455_r2. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component WebConfig. The manipulation leads to improper authentication. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-241027.
D-Link DAP-1860 devices before v1.04b03 Beta allow access to administrator functions without authentication via the HNAP_AUTH header timestamp value. In HTTP requests, part of the HNAP_AUTH header is the timestamp used to determine the time when the user sent the request. If this value is equal to the value stored in the device's /var/hnap/timestamp file, the request will pass the HNAP_AUTH check function.
A vulnerability classified as critical has been found in SATO CL4NX-J Plus 1.13.2-u455_r2. This affects an unknown part of the component Cookie Handler. The manipulation with the input auth=user,level1,settings; web=true leads to improper authentication. Access to the local network is required for this attack. The exploit has been disclosed to the public and may be used. The identifier VDB-241029 was assigned to this vulnerability.
Arris DG860A and DG1670A devices have predictable default WPA2 PSKs that could lead to unauthorized remote access. (They use the first 6 characters of the SSID and the last 6 characters of the BSSID, decrementing the last digit.)
Authentication bypass vulnerability in Fujitsu network devices Si-R series and SR-M series allows a network-adjacent unauthenticated attacker to obtain, change, and/or reset configuration settings of the affected products. Affected products and versions are as follows: Si-R 30B all versions, Si-R 130B all versions, Si-R 90brin all versions, Si-R570B all versions, Si-R370B all versions, Si-R220D all versions, Si-R G100 V02.54 and earlier, Si-R G200 V02.54 and earlier, Si-R G100B V04.12 and earlier, Si-R G110B V04.12 and earlier, Si-R G200B V04.12 and earlier, Si-R G210 V20.52 and earlier, Si-R G211 V20.52 and earlier, Si-R G120 V20.52 and earlier, Si-R G121 V20.52 and earlier, and SR-M 50AP1 all versions.
A vulnerability in the Netgear DGN2200 router with firmware version v1.0.0.46 and earlier permits unauthorized individuals to bypass the authentication. When adding "?x=1.gif" to the the requested url, it will be recognized as passing the authentication.
A vulnerability, which was classified as critical, was found in TOTOLINK T6 4.1.5cu.748_B20211015. This affects the function Form_Login of the file /formLoginAuth.htm. The manipulation of the argument authCode/goURL leads to missing authentication. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used.
Waybox Enel X web management API authentication could be bypassed and provide administrator’s privileges over the Waybox system.
Authentication bypass vulnerability in Qrio Lock (Q-SL2) firmware version 2.0.9 and earlier allows a network-adjacent attacker to analyze the product's communication data and conduct an arbitrary operation under certain conditions.
There exists an authentication bypass vulnerability in OpenThread border router devices and implementations. This issue allows unauthenticated nodes to craft radio frames using “Key ID Mode 2”: a special mode using a static encryption key to bypass security checks, resulting in arbitrary IP packets being allowed on the Thread network. This provides a pathway for an attacker to send/receive arbitrary IPv6 packets to devices on the LAN, potentially exploiting them if they lack additional authentication or contain any network vulnerabilities that would normally be mitigated by the home router’s NAT firewall. Effected devices have been mitigated through an automatic update beyond the affected range.