A vulnerability, which was classified as critical, was found in TOTOLINK T6 4.1.5cu.748_B20211015. This affects the function Form_Login of the file /formLoginAuth.htm. The manipulation of the argument authCode/goURL leads to missing authentication. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used.
NETGEAR WAC510 devices before 5.0.0.17 are affected by authentication bypass.
A support user exists on the device and appears to be a backdoor for Technical Support staff. The default password for this account is “support” and cannot be changed by a user via any normally accessible means.
Certain NETGEAR devices are affected by authentication bypass. This affects GS810EMX before 1.0.0.5, XS512EM before 1.0.0.6, and XS724EM before 1.0.0.6.
An issue was discovered on HMS Anybus X-Gateway AB7832-F firmware version 3. The HICP protocol allows unauthenticated changes to a device's network configurations.
NETGEAR XR500 devices before 2.3.2.32 are affected by authentication bypass.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of multiple NETGEAR routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the mini_httpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-13313.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-1935 1.03 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-16142.
OpenHarmony-v3.1.2 and prior versions have an authenication bypass vulnerability in a callback handler function of Softbus_server in communication subsystem. Attackers can launch attacks on distributed networks by sending Bluetooth rfcomm packets to any remote device and executing arbitrary commands.
Authentication bypass vulnerability in multiple Buffalo network devices allows a network-adjacent attacker to bypass authentication and access the device. The affected products/versions are as follows: WCR-300 firmware Ver. 1.87 and earlier, WHR-HP-G300N firmware Ver. 2.00 and earlier, WHR-HP-GN firmware Ver. 1.87 and earlier, WPL-05G300 firmware Ver. 1.88 and earlier, WRM-D2133HP firmware Ver. 2.85 and earlier, WRM-D2133HS firmware Ver. 2.96 and earlier, WTR-M2133HP firmware Ver. 2.85 and earlier, WTR-M2133HS firmware Ver. 2.96 and earlier, WXR-1900DHP firmware Ver. 2.50 and earlier, WXR-1900DHP2 firmware Ver. 2.59 and earlier, WXR-1900DHP3 firmware Ver. 2.63 and earlier, WXR-5950AX12 firmware Ver. 3.40 and earlier, WXR-6000AX12B firmware Ver. 3.40 and earlier, WXR-6000AX12S firmware Ver. 3.40 and earlier, WZR-300HP firmware Ver. 2.00 and earlier, WZR-450HP firmware Ver. 2.00 and earlier, WZR-600DHP firmware Ver. 2.00 and earlier, WZR-900DHP firmware Ver. 1.15 and earlier, WZR-1750DHP2 firmware Ver. 2.31 and earlier, WZR-HP-AG300H firmware Ver. 1.76 and earlier, WZR-HP-G302H firmware Ver. 1.86 and earlier, WEM-1266 firmware Ver. 2.85 and earlier, WEM-1266WP firmware Ver. 2.85 and earlier, WLAE-AG300N firmware Ver. 1.86 and earlier, FS-600DHP firmware Ver. 3.40 and earlier, FS-G300N firmware Ver. 3.14 and earlier, FS-HP-G300N firmware Ver. 3.33 and earlier, FS-R600DHP firmware Ver. 3.40 and earlier, BHR-4GRV firmware Ver. 2.00 and earlier, DWR-HP-G300NH firmware Ver. 1.84 and earlier, DWR-PG firmware Ver. 1.83 and earlier, HW-450HP-ZWE firmware Ver. 2.00 and earlier, WER-A54G54 firmware Ver. 1.43 and earlier, WER-AG54 firmware Ver. 1.43 and earlier, WER-AM54G54 firmware Ver. 1.43 and earlier, WER-AMG54 firmware Ver. 1.43 and earlier, WHR-300 firmware Ver. 2.00 and earlier, WHR-300HP firmware Ver. 2.00 and earlier, WHR-AM54G54 firmware Ver. 1.43 and earlier, WHR-AMG54 firmware Ver. 1.43 and earlier, WHR-AMPG firmware Ver. 1.52 and earlier, WHR-G firmware Ver. 1.49 and earlier, WHR-G300N firmware Ver. 1.65 and earlier, WHR-G301N firmware Ver. 1.87 and earlier, WHR-G54S firmware Ver. 1.43 and earlier, WHR-G54S-NI firmware Ver. 1.24 and earlier, WHR-HP-AMPG firmware Ver. 1.43 and earlier, WHR-HP-G firmware Ver. 1.49 and earlier, WHR-HP-G54 firmware Ver. 1.43 and earlier, WLI-H4-D600 firmware Ver. 1.88 and earlier, WS024BF firmware Ver. 1.60 and earlier, WS024BF-NW firmware Ver. 1.60 and earlier, WXR-1750DHP firmware Ver. 2.60 and earlier, WXR-1750DHP2 firmware Ver. 2.60 and earlier, WZR-1166DHP firmware Ver. 2.18 and earlier, WZR-1166DHP2 firmware Ver. 2.18 and earlier, WZR-1750DHP firmware Ver. 2.30 and earlier, WZR2-G300N firmware Ver. 1.55 and earlier, WZR-450HP-CWT firmware Ver. 2.00 and earlier, WZR-450HP-UB firmware Ver. 2.00 and earlier, WZR-600DHP2 firmware Ver. 1.15 and earlier, WZR-600DHP3 firmware Ver. 2.19 and earlier, WZR-900DHP2 firmware Ver. 2.19 and earlier, WZR-AGL300NH firmware Ver. 1.55 and earlier, WZR-AMPG144NH firmware Ver. 1.49 and earlier, WZR-AMPG300NH firmware Ver. 1.51 and earlier, WZR-D1100H firmware Ver. 2.00 and earlier, WZR-G144N firmware Ver. 1.48 and earlier, WZR-G144NH firmware Ver. 1.48 and earlier, WZR-HP-G300NH firmware Ver. 1.84 and earlier, WZR-HP-G301NH firmware Ver. 1.84 and earlier, WZR-HP-G450H firmware Ver. 1.90 and earlier, WZR-S1750DHP firmware Ver. 2.32 and earlier, WZR-S600DHP firmware Ver. 2.19 and earlier, and WZR-S900DHP firmware Ver. 2.19 and earlier.
The WAVLINK Quantum D4G (WN531G3) running firmware version M31G3.V5030.200325 uses IP addresses to hold sessions and does not not use session tokens. Therefore, if an attacker changes their IP address to match the logged-in administrator's, or is behind the same NAT as the logged in administrator, session takeover is possible.
Certain NETGEAR devices are affected by authentication bypass. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.
OpenHarmony-v3.1.1 and prior versions have a permission bypass vulnerability. LAN attackers can bypass permission control and get control of camera service.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R7000 1.0.11.116_10.2.100 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of SOAP requests. The issue results from the lack of proper authentication verification before performing a password reset. An attacker can leverage this vulnerability to reset the admin password. Was ZDI-CAN-13483.
A CWE-287: Improper Authentication vulnerability exists that could allow a device to be compromised when a key of less than seven digits is entered and the attacker has access to the KNX installation.
There is no account authentication and permission check logic in the firmware and existing apps of SiHAS's SGW-300, ACM-300, GCM-300, so unauthorized users can remotely control the device.
Open5GS 2.1.3 listens on 0.0.0.0:3000 and has a default password of 1423 for the admin account.
When a non-x86 platform is detected, cloud-init grants root access to a hardcoded url with a local IP address. To prevent this, cloud-init default configurations disable platform enumeration.
A vulnerability in the Netgear DGN2200 router with firmware version v1.0.0.46 and earlier permits unauthorized individuals to bypass the authentication. When adding "?x=1.gif" to the the requested url, it will be recognized as passing the authentication.
Improper authentication in socket services for some Intel(R) Server Boards, Server Systems and Compute Modules before version 2.45 may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-9470.
An issue was discovered on COROS PACE 3 devices through 3.0808.0. It starts advertising if no device is connected via Bluetooth. This allows an attacker to connect with the device via BLE if no other device is connected. While connected, none of the BLE services and characteristics of the device require any authentication or security level. Therefore, any characteristic, depending on their mode of operation (read/write/notify), can be used by the connected attacker. This allows, for example, configuring the device, sending notifications, resetting the device to factory settings, or installing software.
login.cgi on D-Link DIR-600M devices with firmware 3.04 allows remote attackers to bypass authentication by entering more than 20 blank spaces in the password field during an admin login attempt.
An authentication bypass vulnerability was reported in Lenovo ThinkPad Stack Wireless Router firmware version 1.1.3.4 that could allow escalation of privilege.
Tenda W18E V16.01.0.8(1625) suffers from authentication bypass in the web management portal allowing an unauthorized remote attacker to gain administrative access by sending a specially crafted HTTP request.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-15854.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-2610 Firmware v2.01RC067 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of passwords. The issue results from the lack of proper password checking. An attacker can leverage this vulnerability to execute arbitrary code in the context of root. Was ZDI-CAN-10082.
Improper authentication for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.
DrayTek Vigor310 devices through 4.3.2.6 use unencrypted HTTP for authentication requests.
Improper authentication for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.
Improper input validation in BLE prior to SMR Jul-2024 Release 1 allows adjacent attackers to trigger abnormal behavior.
A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804.
Improper authentication vulnerability in Tizen bluetooth-frwk prior to Firmware update JUN-2021 Release allows bluetooth attacker to take over the user's bluetooth device without user awareness.
A limited authentication bypass vulnerability was discovered that could allow an attacker to achieve remote code execution and escalate privileges on the My Cloud devices. Addressed this vulnerability by changing access token validation logic and rewriting rule logic on PHP scripts.
NVIDIA UFM Enterprise, UFM Appliance, and UFM CyberAI contain a vulnerability where an attacker can cause an improper authentication issue by sending a malformed request through the Ethernet management interface. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, denial of service, and information disclosure.
CWE-287: Improper Authentication vulnerability exists that could cause unauthorized tampering of device configuration over NFC communication.
The Bluetooth module of some Huawei Smart Screen products has an identity authentication bypass vulnerability. Successful exploitation of this vulnerability may allow attackers to access restricted functions. Successful exploitation of this vulnerability may allow attackers to access restricted functions.
A vulnerability classified as critical has been found in SATO CL4NX-J Plus 1.13.2-u455_r2. This affects an unknown part of the component Cookie Handler. The manipulation with the input auth=user,level1,settings; web=true leads to improper authentication. Access to the local network is required for this attack. The exploit has been disclosed to the public and may be used. The identifier VDB-241029 was assigned to this vulnerability.
A vulnerability was found in SATO CL4NX-J Plus 1.13.2-u455_r2. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component WebConfig. The manipulation leads to improper authentication. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-241027.
This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1860 firmware version 1.04B03 WiFi extenders. Authentication is not required to exploit this vulnerability. The specific flaw exists within the uhttpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the device. Was ZDI-CAN-10894.
OpenBlocks IoT VX2 prior to Ver.4.0.0 (Ver.3 Series) allows an attacker on the same network segment to bypass authentication and to initialize the device via unspecified vectors.
IBM Tivoli Application Dependency Discovery Manager 7.3.0.0 through 7.3.0.10 could allow an attacker on the organization's local network to escalate their privileges due to unauthorized API access. IBM X-Force ID: 270267.
In Patient Information Center iX (PICiX) Version B.02, C.02, C.03, and PerformanceBridge Focal Point Version A.01, when an actor claims to have a given identity, the software does not prove or insufficiently proves the claim is correct.
TP-Link USB Network Server TL-PS310U devices before 2.079.000.t0210 allow an attacker on the same network to bypass authentication via a web-administration request that lacks a password parameter.
DIGITUS DA-70254 4-Port Gigabit Network Hub 2.073.000.E0008 devices allow an attacker on the same network to bypass authentication via a web-administration request that lacks a password parameter.
Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.
An issue was discovered on NETGEAR Orbi Tri-Band Business WiFi Add-on Satellite (SRS60) AC3000 V2.5.1.106, Outdoor Satellite (RBS50Y) V2.5.1.106, and Pro Tri-Band Business WiFi Router (SRR60) AC3000 V2.5.1.106. The administrative SOAP interface allows an unauthenticated remote write of arbitrary Wi-Fi configuration data such as authentication details (e.g., the Web-admin password), network settings, DNS settings, system administration interface configuration, etc.
Certain NETGEAR devices are affected by authentication bypass. This affects R6300v2 before 1.0.4.8, R6400 before 1.0.1.20, R6700 before 1.0.1.20, R6900 before 1.0.1.20, R7000 before 1.0.7.10, R7100LG before V1.0.0.32, R7300DST before 1.0.0.52, R7900 before 1.0.1.16, R8000 before 1.0.3.36, R8300 before 1.0.2.94, R8500 before 1.0.2.94, WNDR3400v3 before 1.0.1.12, and WNR3500Lv2 before 1.2.0.40.
Certain NETGEAR devices are affected by authentication bypass. This affects R6300v2 before 1.0.4.8, PLW1000v2 before 1.0.0.14, and PLW1010v2 before 1.0.0.14.
Authentication bypass vulnerability in ACERA 1320 firmware ver.01.26 and earlier, and ACERA 1310 firmware ver.01.26 and earlier allows a network-adjacent unauthenticated attacker who can access the affected product to download configuration files and/or log files, and upload configuration files and/or firmware. They are affected when running in ST(Standalone) mode.