Envoy is an open source edge and service proxy, designed for cloud-native applications. Sending a locally generated response must stop further processing of request or response data. Envoy tracks the amount of buffered request and response data and aborts the request if the amount of buffered data is over the limit by sending 413 or 500 responses. However when the buffer overflows while response is processed by the filter chain the operation may not be aborted correctly and result in accessing a freed memory block. If this happens Envoy will crash resulting in a denial of service.

Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions of Envoy a crash occurs when configured for :ref:`upstream tunneling <envoy_v3_api_field_extensions.filters.network.tcp_proxy.v3.TcpProxy.tunneling_config>` and the downstream connection disconnects while the the upstream connection or http/2 stream is still being established. There are no workarounds for this issue. Users are advised to upgrade.

Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy's 1.31 is using `oghttp` as the default HTTP/2 codec, and there are potential bugs around stream management in the codec. To resolve this Envoy will switch off the `oghttp2` by default. The impact of this issue is that envoy will crash. This issue has been addressed in release version 1.31.2. All users are advised to upgrade. There are no known workarounds for this issue.

Pomerium is an open source identity-aware access proxy. Envoy, which Pomerium is based on, incorrectly handles resetting of HTTP/2 streams with excessive complexity. This can lead to high CPU utilization when a large number of streams are reset. This can result in a DoS condition. Pomerium versions 0.14.8 and 0.15.1 contain an upgraded envoy binary with this vulnerability patched.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions Envoy transitions a H/2 connection to the CLOSED state when it receives a GOAWAY frame without any streams outstanding. The connection state is transitioned to DRAINING when it receives a SETTING frame with the SETTINGS_MAX_CONCURRENT_STREAMS parameter set to 0. Receiving these two frames in the same I/O event results in abnormal termination of the Envoy process due to invalid state transition from CLOSED to DRAINING. A sequence of H/2 frames delivered by an untrusted upstream server will result in Denial of Service in the presence of untrusted **upstream** servers. Envoy versions 1.19.1, 1.18.4 contain fixes to stop processing of pending H/2 frames after connection transition to the CLOSED state.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions envoy’s procedure for resetting a HTTP/2 stream has O(N^2) complexity, leading to high CPU utilization when a large number of streams are reset. Deployments are susceptible to Denial of Service when Envoy is configured with high limit on H/2 concurrent streams. An attacker wishing to exploit this vulnerability would require a client opening and closing a large number of H/2 streams. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to reduce time complexity of resetting HTTP/2 streams. As a workaround users may limit the number of simultaneous HTTP/2 dreams for upstream and downstream peers to a low number, i.e. 100.

Envoy is a cloud-native, open source edge and service proxy. Due to how Envoy invoked the nlohmann JSON library, the library could throw an uncaught exception from downstream data if incomplete UTF-8 strings were serialized. The uncaught exception would cause Envoy to crash.

Envoy is a cloud-native, open source edge and service proxy. Envoyproxy with a Brotli filter can get into an endless loop during decompression of Brotli data with extra input.

Envoy is a cloud-native, open source edge and service proxy. There is a crash at `QuicheDataReader::PeekVarInt62Length()`. It is caused by integer underflow in the `QuicStreamSequencerBuffer::PeekRegion()` implementation.

An issue was discovered in Envoy through 1.71.1. There is a remotely exploitable NULL pointer dereference and crash in TLS when an unknown TLS alert code is received.

An issue was discovered in Envoy 1.14.0. There is a remotely exploitable crash for HTTP2 Metadata, because an empty METADATA map triggers a Reachable Assertion.

Envoy is a cloud-native, open source edge and service proxy. When an upstream TLS cluster is used with `auto_sni` enabled, a request containing a `host`/`:authority` header longer than 255 characters triggers an abnormal termination of Envoy process. Envoy does not gracefully handle an error when setting SNI for outbound TLS connection. The error can occur when Envoy attempts to use the `host`/`:authority` header value longer than 255 characters as SNI for outbound TLS connection. SNI length is limited to 255 characters per the standard. Envoy always expects this operation to succeed and abnormally aborts the process when it fails. This vulnerability is fixed in 1.30.1, 1.29.4, 1.28.3, and 1.27.5.

Envoy is a cloud-native, open-source edge and service proxy. In versions 1.29.0 and 1.29.1, theEnvoy HTTP/2 protocol stack is vulnerable to the flood of CONTINUATION frames. Envoy's HTTP/2 codec does not reset a request when header map limits have been exceeded. This allows an attacker to send an sequence of CONTINUATION frames without the END_HEADERS bit set causing unlimited memory consumption. This can lead to denial of service through memory exhaustion. Users should upgrade to versions 1.29.2 to mitigate the effects of the CONTINUATION flood. Note that this vulnerability is a regression in Envoy version 1.29.0 and 1.29.1 only. As a workaround, downgrade to version 1.28.1 or earlier or disable HTTP/2 protocol for downstream connections.

Envoy is a high-performance edge/middle/service proxy. When PPv2 is enabled both on a listener and subsequent cluster, the Envoy instance will segfault when attempting to craft the upstream PPv2 header. This occurs when the downstream request has a command type of LOCAL and does not have the protocol block. This issue has been addressed in releases 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a high-performance edge/middle/service proxy. Envoy crashes in Proxy protocol when using an address type that isn’t supported by the OS. Envoy is susceptible to crashing on a host with IPv6 disabled and a listener config with proxy protocol enabled when it receives a request where the client presents its IPv6 address. It is valid for a client to present its IPv6 address to a target server even though the whole chain is connected via IPv4. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.

An issue was discovered in Envoy 1.12.0. Upon receipt of a malformed HTTP request without a Host header, it sends an internally generated "Invalid request" response. This internally generated response is dispatched through the configured encoder filter chain before being sent to the client. An encoder filter that invokes route manager APIs that access a request's Host header causes a NULL pointer dereference, resulting in abnormal termination of the Envoy process.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may exhaust file descriptors and/or memory when accepting too many connections.

Envoy 1.12.0 allows a remote denial of service because of resource loops, as demonstrated by a single idle TCP connection being able to keep a worker thread in an infinite busy loop when continue_on_listener_filters_timeout is used."

Upon receiving each incoming request header data, Envoy will iterate over existing request headers to verify that the total size of the headers stays below a maximum limit. The implementation in versions 1.10.0 through 1.11.1 for HTTP/1.x traffic and all versions of Envoy for HTTP/2 traffic had O(n^2) performance characteristics. A remote attacker may craft a request that stays below the maximum request header size but consists of many thousands of small headers to consume CPU and result in a denial-of-service attack.

Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions a crafted request crashes Envoy when a CONNECT request is sent to JWT filter configured with regex match. This provides a denial of service attack vector. The only workaround is to not use regex in the JWT filter. Users are advised to upgrade.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, the CORS filter will segfault and crash Envoy when the `origin` header is removed and deleted between `decodeHeaders`and `encodeHeaders`. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, do not remove the `origin` header in the Envoy configuration.

Envoy is a cloud-native, open source edge and service proxy. A crash was observed in `EnvoyQuicServerStream::OnInitialHeadersComplete()` with following call stack. It is a use-after-free caused by QUICHE continuing push request headers after `StopReading()` being called on the stream. As after `StopReading()`, the HCM's `ActiveStream` might have already be destroyed and any up calls from QUICHE could potentially cause use after free.

Envoy is a high-performance edge/middle/service proxy. Envoy will crash when certain timeouts happen within the same interval. The crash occurs when the following are true: 1. hedge_on_per_try_timeout is enabled, 2. per_try_idle_timeout is enabled (it can only be done in configuration), 3. per-try-timeout is enabled, either through headers or configuration and its value is equal, or within the backoff interval of the per_try_idle_timeout. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy before 1.16.1 mishandles dropped and truncated datagrams, as demonstrated by a segmentation fault for a UDP packet size larger than 1500.

Envoy master between 2d69e30 and 3b5acb2 may fail to parse request URL that requires host canonicalization.

Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter would try to invoke the remaining filters in the chain after emitting a local response, which triggers an ASSERT() in newer versions and corrupts memory on earlier versions. continueDecoding() shouldn’t ever be called from filters after a local reply has been sent. Users are advised to upgrade. There are no known workarounds for this issue.

Envoy is a cloud-native high-performance edge/middle/service proxy. In versions prior to 1.22.1 if Envoy attempts to send an internal redirect of an HTTP request consisting of more than HTTP headers, there’s a lifetime bug which can be triggered. If while replaying the request Envoy sends a local reply when the redirect headers are processed, the downstream state indicates that the downstream stream is not complete. On sending the local reply, Envoy will attempt to reset the upstream stream, but as it is actually complete, and deleted, this result in a use-after-free. Users are advised to upgrade. Users unable to upgrade are advised to disable internal redirects if crashes are observed.

Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 secompressors accumulate decompressed data into an intermediate buffer before overwriting the body in the decode/encodeBody. This may allow an attacker to zip bomb the decompressor by sending a small highly compressed payload. Maliciously constructed zip files may exhaust system memory and cause a denial of service. Users are advised to upgrade. Users unable to upgrade may consider disabling decompression.

Envoy is a cloud-native high-performance edge/middle/service proxy. Prior to 1.33.1, 1.32.4, 1.31.6, and 1.30.10, Envoy's ext_proc HTTP filter is at risk of crashing if a local reply is sent to the external server due to the filter's life time issue. A known situation is the failure of a websocket handshake will trigger a local reply leading to the crash of Envoy. This vulnerability is fixed in 1.33.1, 1.32.4, 1.31.6, and 1.30.10.

Envoy is an open source edge and service proxy, designed for cloud-native applications. The envoy common router will segfault if an internal redirect selects a route configured with direct response or redirect actions. This will result in a denial of service. As a workaround turn off internal redirects if direct response entries are configured on the same listener.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when processing HTTP/1.1 headers with long field names or requests with long URLs.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when proxying HTTP/2 requests or responses with many small (i.e. 1 byte) data frames.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier is susceptible to increased memory usage in the case where an HTTP/2 client requests a large payload but does not send enough window updates to consume the entire stream and does not reset the stream.

Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions `sendOverloadError` is going to assume the active request exists when `envoy.load_shed_points.http1_server_abort_dispatch` is configured. If `active_request` is nullptr, only onMessageBeginImpl() is called. However, the `onMessageBeginImpl` will directly return ok status if the stream is already reset leading to the nullptr reference. The downstream reset can actually happen during the H/2 upstream reset. As a result envoy may crash. This issue has been addressed in releases 1.32.3, 1.31.5, 1.30.9, and 1.29.12. Users are advised to upgrade. Users unable to upgrade may disable `http1_server_abort_dispatch` load shed point and/or use a high threshold.

Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy’s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions after Envoy sends a locally generated response it must stop further processing of request or response data. However when local response is generated due the internal buffer overflow while request or response is processed by the filter chain the operation may not be stopped completely and result in accessing a freed memory block. A specifically constructed request delivered by an untrusted downstream or upstream peer in the presence of extensions that modify and increase the size of request or response bodies resulting in a Denial of Service when using extensions that modify and increase the size of request or response bodies, such as decompressor filter. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to address incomplete termination of request processing after locally generated response. As a workaround disable Envoy's decompressor, json-transcoder or grpc-web extensions or proprietary extensions that modify and increase the size of request or response bodies, if feasible.

An issue was discovered in Envoy through 1.71.1. There is a remotely exploitable integer overflow in which a very large grpc-timeout value leads to unexpected timeout calculations.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, escalation of privileges is possible when `failure_mode_allow: true` is configured for `ext_authz` filter. For affected components that are used for logging and/or visibility, requests may not be logged by the receiving service. When Envoy was configured to use ext_authz, ext_proc, tap, ratelimit filters, and grpc access log service and an http header with non-UTF-8 data was received, Envoy would generate an invalid protobuf message and send it to the configured service. The receiving service would typically generate an error when decoding the protobuf message. For ext_authz that was configured with ``failure_mode_allow: true``, the request would have been allowed in this case. For the other services, this could have resulted in other unforeseen errors such as a lack of visibility into requests. As of versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy by default sanitizes the values sent in gRPC service calls to be valid UTF-8, replacing data that is not valid UTF-8 with a `!` character. This behavioral change can be temporarily reverted by setting runtime guard `envoy.reloadable_features.service_sanitize_non_utf8_strings` to false. As a workaround, one may set `failure_mode_allow: false` for `ext_authz`.

Duplicate of CVE-2024-45806.

Envoy is an open source edge and service proxy designed for cloud-native applications. Envoy allows mixed-case schemes in HTTP/2, however, some internal scheme checks are case-sensitive. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, this can lead to the rejection of requests with mixed-case schemes such as `htTp` or `htTps`, or the bypassing of some requests such as `https` in unencrypted connections. With a fix in versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, Envoy will now lowercase scheme values by default, and change the internal scheme checks that were case-sensitive to be case-insensitive. There are no known workarounds for this issue.

Envoy is an open source edge and service proxy designed for cloud-native applications. Compliant HTTP/1 service should reject malformed request lines. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, There is a possibility that non compliant HTTP/1 service may allow malformed requests, potentially leading to a bypass of security policies. This issue is fixed in versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy does not sanitize or escape request properties when generating request headers. This can lead to characters that are illegal in header values to be sent to the upstream service. In the worst case, it can cause upstream service to interpret the original request as two pipelined requests, possibly bypassing the intent of Envoy’s security policy. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. As a workaround, disable adding request headers based on the downstream request properties, such as downstream certificate properties.

Envoy is a high-performance edge/middle/service proxy. External authentication can be bypassed by downstream connections. Downstream clients can force invalid gRPC requests to be sent to ext_authz, circumventing ext_authz checks when failure_mode_allow is set to true. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the client may bypass JSON Web Token (JWT) checks and forge fake original paths. The header `x-envoy-original-path` should be an internal header, but Envoy does not remove this header from the request at the beginning of request processing when it is sent from an untrusted client. The faked header would then be used for trace logs and grpc logs, as well as used in the URL used for `jwt_authn` checks if the `jwt_authn` filter is used, and any other upstream use of the x-envoy-original-path header. Attackers may forge a trusted `x-envoy-original-path` header. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 have patches for this issue.

In ImageMagick 7.0.5-7 Q16, a crafted file could trigger an assertion failure in the WriteBlob function in MagickCore/blob.c because of missing checks in the ReadOneJNGImage function in coders/png.c.

In ImageMagick 7.0.5-7 Q16, a crafted file could trigger an assertion failure in the ResetImageProfileIterator function in MagickCore/profile.c because of missing checks in the ReadDDSImage function in coders/dds.c.

An incorrect "pair?" check in the Scheme "length" procedure results in an unsafe pointer dereference in all CHICKEN Scheme versions prior to 4.13, which allows an attacker to cause a denial of service by passing an improper list to an application that calls "length" on it.

The qemu-nbd server in QEMU (aka Quick Emulator), when built with the Network Block Device (NBD) Server support, allows remote attackers to cause a denial of service (segmentation fault and server crash) by leveraging failure to ensure that all initialization occurs before talking to a client in the nbd_negotiate function.