D-Link DIR-822 Rev.Bx devices with firmware v.202KRb06 and older allow a buffer overflow via long MacAddress data in a /HNAP1/SetClientInfo HNAP protocol message, which is mishandled in /usr/sbin/udhcpd during reading of the /var/servd/LAN-1-udhcpd.conf file.

D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function.

In D-Link DIR-860L v2.03, there is a buffer overflow vulnerability due to the lack of length verification for the SID field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.

Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution.

A buffer overflow in D-Link DIR-615 C2 3.03WW. The ping_ipaddr parameter in ping_response.cgi POST request allows an attacker to crash the webserver and might even gain remote code execution.

D-Link DAP-2660 v1.13 was discovered to contain a buffer overflow via the f_ipv6_enable parameter at /bsc_ipv6. This vulnerability is exploited via a crafted POST request.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a buffer overflow via the function FUN_0001be68.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the param_2 parameter in the inet_ntoa() function.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a buffer overflow via the function fgets.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this vulnerability is the function cgi_get_cooliris of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument path leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-823G firmware version 1.02B05 has a buffer overflow vulnerability, which originates from the HostName field in SetParentsControlInfo.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formLanguageChange function via the nextPage parameter.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

Buffer Overflow Vulnerability in D-Link DIR-825 v1.33.0.44ebdd4-embedded and below allows attacker to execute arbitrary code via the GetConfig method to the /CPE endpoint.

D-Link DIR3060 DIR3060A1_FW111B04.bin is vulnerable to Buffer Overflow.

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Buffer Overflow via cgibin, hnap_main,

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 & GO-RT-AC750_revB_FWv200b02 is vulnerable to Buffer Overflow via authenticationcgi_main.

In D-Link DAP1650 v1.04 firmware, the fileaccess.cgi program in the firmware has a buffer overflow vulnerability caused by strncpy.

A vulnerability was found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this issue is the function formSetWizard2. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DIR-619L 2.04B04. Affected is the function formSetEasy_Wizard. The manipulation of the argument curTime leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-600L up to 2.07B01. Affected by this issue is the function formEasySetupWizard3. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formSetWAN_Wizard534. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DIR-619L 2.04B04. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this vulnerability is the function formSetWAN_Wizard52. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-600L up to 2.07B01 and classified as critical. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.04B04. This issue affects the function formEasySetupWizard3. The manipulation of the argument wan_connected leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetWAN_Wizard55. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the FILECODE parameter on login.

Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the curTime parameter on login.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_move_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument photo_name leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability classified as critical was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This vulnerability affects the function cgi_set_cover of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument album_name leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

D-Link DAP-2660 v1.13 was discovered to contain a buffer overflow via the component /adv_resource. This vulnerability is exploited via a crafted GET request.

D-Link DIR-842 fw_revA_1-02_eu_multi_20151008 was discovered to contain multiple buffer overflows in the fgets function via the acStack_120 and acStack_220 parameters.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the acStack_50 parameter.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the param_2 parameter in the FUN_0000acb4 function.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This issue affects the function cgi_del_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument current_path leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

D-Link DIR-823G firmware version 1.02B05 has a buffer overflow vulnerability, which originates from the URL field in SetParentsControlInfo.

An access control issue in the component formDMZ.cgi of D-Link 816A2_FWv1.10CNB05_R1B011D88210 allows unauthenticated attackers to set the DMZ service of the device via a crafted POST request.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

Multiple SQL injection vulnerabilities in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allow remote attackers to execute arbitrary SQL commands via the password to (1) the login.authenticate function in share/lua/5.1/teamf1lualib/login.lua or (2) captivePortal.lua.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function upgrade_filter. This vulnerability allows attackers to execute arbitrary commands via the path and time parameters.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.

D-Link device DIR_878_FW1.30B08_Hotfix_02 was discovered to contain a command injection vulnerability in the twsystem function. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetNetworkTomographySettings. This vulnerability allows attackers to execute arbitrary commands via the tomography_ping_address, tomography_ping_number, tomography_ping_size, tomography_ping_timeout, and tomography_ping_ttl parameters.

D-Link device DIR_882 DIR_882_FW1.30B06_Hotfix_02 was discovered to contain a command injection vulnerability in the LocalIPAddress parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link device DIR_882 DIR_882_FW1.30B06_Hotfix_02 was discovered to contain a command injection vulnerability in the twsystem function. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function msp_info.htm. This vulnerability allows attackers to execute arbitrary commands via the cmd parameter.