Under certain circumstances IQ Panel4 and IQ4 Hub panel software prior to version 4.4.2 could allow unauthorized access to settings.

An unauthorized user could access debug features in Quantum HD Unity products that were accidentally exposed.

Under certain circumstances the session token is not cleared on logout.

A vulnerability in versions 10.1 through 10.5 of Johnson Controls CEM Systems AC2000 allows a remote attacker to access to the system without adequate authorization. This issue affects: Johnson Controls CEM Systems AC2000 10.1; 10.2; 10.3; 10.4; 10.5.

Under certain configurations an unauthenticated remote user could be given access to credentials stored in the exacqVision Server.

An unauthorized user could gain account access to IQ Wifi 6 versions prior to 2.0.2 by conducting a brute force authentication attack.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows OS Command Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

Unauthenticated Remote Code Execution and Information Disclosure due to Local File Inclusion (LFI) vulnerability in Johnson Controls Frick Controls Quantum HD allow an unauthenticated attacker to execute arbitrary code on the affected device, leading to full system compromise. This issue affects Frick Controls Quantum HD: Frick Controls Quantum HD version 10.22 and prior.

Hardcoded Email Credentials Saved as Plaintext in Firmware (CWE-256: Plaintext Storage of a Password) vulnerability in Frick Controls Quantum HD version 10.22 and prior lead to unauthorized access, exposure of sensitive information, and potential misuse or system compromise This issue affects Frick Controls Quantum HD version 10.22 and prior.

Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

A vulnerability with the SmartService API Service option exists whereby an unauthorized user could potentially exploit this to upload malicious code to the server that could be executed at system level privileges. This affects Johnson Controls' Kantech EntraPass Corporate Edition versions 8.0 and prior; Kantech EntraPass Global Edition versions 8.0 and prior.

Unauthenticated Remote Code Execution i.e Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

A debug feature in Sensormatic Electronics Illustra Pro Gen 4 Dome and PTZ cameras allows a user to compromise credentials after a long period of sustained attack.

An attacker with physical access to the Kantech Gen1 ioSmart card reader with firmware version prior to 1.07.02 in certain circumstances can recover the reader's communication memory between the card and reader.

All versions of iSTAR Ultra prior to version 6.8.9.CU01 are vulnerable to a command injection that could allow an unauthenticated user root access to the system.

A vulnerability in specified versions of American Dynamics victor Web Client and Software House C•CURE Web Client could allow an unauthenticated attacker on the network to create and sign their own JSON Web Token and use it to execute an HTTP API Method without the need for valid authentication/authorization. Under certain circumstances, this could be used by an attacker to impact system availability by conducting a Denial of Service attack.

Improper authentication in OpenBlue Enterprise Manager Data Collector versions prior to 3.2.5.75 allow access to an unauthorized user under certain circumstances.

On Metasys ADX Server version 12.0 running MVE, an Active Directory user could execute validated actions without providing a valid password when using MVE SMP UI.

Under certain circumstances an authenticated user could lock other users out of the system or take over their accounts in Metasys ADS/ADX/OAS server 10 versions prior to 10.1.5 and Metasys ADS/ADX/OAS server 11 versions prior to 11.0.2.

A vulnerability in Metasys ADS/ADX/OAS 10 versions prior to 10.1.5 and Metasys ADS/ADX/OAS 11 versions prior to 11.0.2 allows unverified password change.

The client in OpenSSH before 7.2 mishandles failed cookie generation for untrusted X11 forwarding and relies on the local X11 server for access-control decisions, which allows remote X11 clients to trigger a fallback and obtain trusted X11 forwarding privileges by leveraging configuration issues on this X11 server, as demonstrated by lack of the SECURITY extension on this X11 server.

Starting from 2.53.6, 2.54.3, and 2.55.0, Zitadel only required multi factor authentication in case the login policy has either enabled requireMFA or requireMFAForLocalUsers. If a user has set up MFA without this requirement, Zitadel would consider single factor auhtenticated sessions as valid as well and not require multiple factors. Bypassing second authentication factors weakens multifactor authentication and enables attackers to bypass the more secure factor. An attacker can target the TOTP code alone, only six digits, bypassing password verification entirely and potentially compromising accounts with 2FA enabled. This vulnerability is fixed in 4.6.0, 3.4.3, and 2.71.18.

WP Cerber before 8.9.3 allows MFA bypass via wordpress_logged_in_[hash] manipulation.

FACTION is a PenTesting Report Generation and Collaboration Framework. Prior to version 1.7.1, an extension execution path in Faction’s extension framework permits untrusted extension code to execute arbitrary system commands on the server when a lifecycle hook is invoked, resulting in remote code execution (RCE) on the host running Faction. Due to a missing authentication check on the /portal/AppStoreDashboard endpoint, an attacker can access the extension management UI and upload a malicious extension without any authentication, making this vulnerability exploitable by unauthenticated users. This issue has been patched in version 1.7.1.

A flaw was found in Apache ShenYu Admin. The incorrect use of JWT in ShenyuAdminBootstrap allows an attacker to bypass authentication. This issue affected Apache ShenYu 2.3.0 and 2.4.0

jeewx-boot 1.3 has an authentication bypass vulnerability in the preHandle function

FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. Versions are vulnerable to authentication bypass when the authentication type is set to "webserver." When providing an Authorization header with an arbitrary value, a session is associated with the target user regardless of valid credentials. This issue is fixed in versions 16.0.44 and 17.0.23.

ZITADEL is an open source identity management platform. Starting in version 2.50.0 and prior to versions 2.71.19, 3.4.4, and 4.6.6, a vulnerability in ZITADEL's federation process allowed auto-linking users from external identity providers to existing users in ZITADEL even if the corresponding IdP was not active or if the organization did not allow federated authentication. This vulnerability stems from the platform's failure to correctly check or enforce an organization's specific security settings during the authentication flow. An Organization Administrator can explicitly disable an IdP or disallow federation, but this setting was not being honored during the auto-linking process. This allowed an unauthenticated attacker to initiate a login using an IdP that should have been disabled for that organization. The platform would incorrectly validate the login and, based on a matching criteria, link the attacker's external identity to an existing internal user account. This may result in a full Account Takeover, bypassing the organization's mandated security controls. Note that accounts with MFA enabled can not be taken over by this attack. Also note that only IdPs create on an instance level would allow this to work. IdPs registered on another organization would always be denied in the (auto-)linking process. Versions 4.6.6, 3.4.4, and 2.71.19 resolve the issue by correctly validating the organization's login policy before auto-linking an external user. No known workarounds are available aside from upgrading.

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

An issue was discovered in Mattermost Server before 3.0.0. A password-reset link could be reused.

Weak access control in OpenText PVCS Version Manager allows potential bypassing of authentication and download of files.

A vulnerability was found in Apereo CAS 6.6. It has been classified as critical. This affects an unknown part of the file /login?service of the component 2FA. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The miniOrange Social Login and Register (Discord, Google, Twitter, LinkedIn) Pro Addon plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 200.3.9. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username and the user does not have an already-existing account for the service returning the token.

The Sign In With Google plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.8.0. This is due to the 'authenticate_user' user function not implementing sufficient null value checks when setting the access token and user information. This makes it possible for unauthenticated attackers to log in as the first user who has signed in using Google OAuth, which could be the site administrator.

Weak access control in OpenText PVCS Version Manager allows potential bypassing of authentication and uploading of files.

Gessler GmbH WEB-MASTER has a restoration account that uses weak hard coded credentials and if exploited could allow an attacker control over the web management of the device.

Webauthn Framework 3.3.x before 3.3.4 has Incorrect Access Control. An attacker that controls a user's system is able to login to a vulnerable service using an attached FIDO2 authenticator without passing a check of the user presence.

A vulnerability classified as critical was found in Sichuan Yougou Technology KuERP up to 1.0.4. Affected by this vulnerability is the function checklogin of the file /application/index/common.php. The manipulation of the argument App_User_id/App_user_Token leads to improper authentication. The exploit has been disclosed to the public and may be used. The identifier VDB-252253 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Profile Builder – User Profile & User Registration Forms plugin for WordPress is vulnerable to unauthorized password resets in versions up to, and including 3.9.0. This is due to the plugin using native password reset functionality, with insufficient validation on the password reset function (wppb_front_end_password_recovery). The function uses the plaintext value of a password reset key instead of a hashed value which means it can easily be retrieved and subsequently used. An attacker can leverage CVE-2023-0814, or another vulnerability like SQL Injection in another plugin or theme installed on the site to successfully exploit this vulnerability.

A vulnerability was found in OneNav up to 0.9.33. It has been classified as critical. This affects an unknown part of the file /index.php?c=api of the component API. The manipulation of the argument X-Token leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249765 was assigned to this vulnerability.

An authentication bypass vulnerability exists in Arcserve Unified Data Protection 9.2 and 8.1 in the edge-app-base-webui.jar!com.ca.arcserve.edge.app.base.ui.server.EdgeLoginServiceImpl.doLogin() function within wizardLogin.

A condition exists in FlashArray Purity whereby an attacker can employ a privileged account allowing remote access to the array.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 anyone can change the administrator and moderator passwords via the iso.3.6.1.4.1.3212.100.3.2.8.1 and iso.3.6.1.4.1.3212.100.3.2.8.2 OIDs. A remote, unauthenticated attacker can use this vulnerability to change the admin or moderator user's password and gain access to restricted areas on the HTTP interface.

Crypto-NAK packets in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to bypass authentication.

The Web3 WordPress plugin before 3.0.0 is vulnerable to an authentication bypass due to incorrect authentication checking in the login flow in functions 'handle_auth_request' and 'hadle_login_request'. This makes it possible for non authenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username.

Authentication bypass vulnerability in Amazing Little Poll affecting versions 1.3 and 1.4. This vulnerability could allow an unauthenticated user to access the admin panel without providing any credentials by simply accessing the "lp_admin.php?adminstep=" parameter.

The Syrus4 IoT gateway utilizes an unsecured MQTT server to download and execute arbitrary commands, allowing a remote unauthenticated attacker to execute code on any Syrus4 device connected to the cloud service. The MQTT server also leaks the location, video and diagnostic data from each connected device. An attacker who knows the IP address of the server is able to connect and perform the following operations: * Get location data of the vehicle the device is connected to * Send CAN bus messages via the ECU module ( https://syrus.digitalcomtech.com/docs/ecu-1 https://syrus.digitalcomtech.com/docs/ecu-1 ) * Immobilize the vehicle via the safe-immobilizer module ( https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization ) * Get live video through the connected video camera * Send audio messages to the driver ( https://syrus.digitalcomtech.com/docs/system-tools#apx-tts https://syrus.digitalcomtech.com/docs/system-tools#apx-tts )

Tyler Technologies Court Case Management Plus allows a remote attacker to authenticate as any user by manipulating at least the 'CmWebSearchPfp/Login.aspx?xyzldk=' and 'payforprint_CM/Redirector.ashx?userid=' parameters. The vulnerable "pay for print" feature was removed on or around 2023-11-01.