A buffer overflow vulnerability in “diagstatus” command in Brocade Fabric OS before Brocade Fabric v9.2.0 and v9.1.1c could allow an authenticated user to crash the Brocade Fabric OS switch leading to a denial of service.

A buffer overflow vulnerability exists in Symantec Server Management Suite version 7.9 and before. A remote, anonymous attacker can exploit this vulnerability to achieve remote code execution as SYSTEM.

A buffer overflow vulnerability exists in Symantec Messaging Gateway versions 9.5 and before. A remote, anonymous attacker can exploit this vulnerability to achieve remote code execution as root.

A buffer overflow vulnerability exists in Symantec Deployment Solution version 7.9 when parsing UpdateComputer tokens. A remote, anonymous attacker can exploit this vulnerability to achieve remote code execution as SYSTEM.

A buffer overflow vulnerability exists in Symantec Data Loss Prevention version 14.0.2 and before. A remote, unauthenticated attacker can exploit this vulnerability by enticing a user to open a crafted document to achieve code execution.

A buffer overflow vulnerability exists in Symantec Messaging Gateway versions 10.5 and before. A remote, anonymous attacker can exploit this vulnerability to achieve remote code execution as root.

CA Unified Infrastructure Management (Nimsoft/UIM) 20.1, 20.3.x, and 9.20 and below contains a buffer overflow vulnerability in the robot (controller) component. A remote attacker can execute arbitrary code.

In Brocade Fabric OS before v9.2.0a, a local authenticated privileged user can trigger a buffer overflow condition, leading to a kernel panic with large input to buffers in the portcfgfportbuffers command.

Broadcom Emulex HBA Manager/One Command Manager versions before 11.4.425.0 and 12.8.542.31, if not installed in Strictly Local Management mode, have a buffer overflow vulnerability in the remote GetDumpFile command that could allow a user to attempt various attacks. In non-secure mode, the user is unauthenticated

Buffer Overflow in Tcpreplay v4.3.2 allows attackers to cause a Denial of Service via the 'do_checksum' function in 'checksum.c'. It can be triggered by sending a crafted pcap file to the 'tcpreplay-edit' binary. This issue is different than CVE-2019-8381.

Broadcom Emulex HBA Manager/One Command Manager versions before 11.4.425.0 and 12.8.542.31, if not installed in Strictly Local Management mode, have a buffer overflow vulnerability in the remote firmware download feature that could allow remote unauthenticated users to perform various attacks. In non-secure mode, the user is unauthenticated.

In multiple functions of JobStore.java, there is a possible way to cause a crash on startup due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-246542285

In multiple functions of multiple files, there is a possible way to make the device unusable due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-268193777

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix protection fault in iommufd_test_syz_conv_iova Syzkaller reported the following bug: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7] Call Trace: lock_acquire lock_acquire+0x1ce/0x4f0 down_read+0x93/0x4a0 iommufd_test_syz_conv_iova+0x56/0x1f0 iommufd_test_access_rw.isra.0+0x2ec/0x390 iommufd_test+0x1058/0x1e30 iommufd_fops_ioctl+0x381/0x510 vfs_ioctl __do_sys_ioctl __se_sys_ioctl __x64_sys_ioctl+0x170/0x1e0 do_syscall_x64 do_syscall_64+0x71/0x140 This is because the new iommufd_access_change_ioas() sets access->ioas to NULL during its process, so the lock might be gone in a concurrent racing context. Fix this by doing the same access->ioas sanity as iommufd_access_rw() and iommufd_access_pin_pages() functions do.

Das U-Boot 2022.01 has a Buffer Overflow.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix possible buffer overflow struct hci_dev_info has a fixed size name[8] field so in the event that hdev->name is bigger than that strcpy would attempt to write past its size, so this fixes this problem by switching to use strscpy.

Multiple buffer overflows in the esa_write function in /dev/seirenin the Exynos Seiren Audio driver, as used in Samsung S6 Edge, allow local users to cause a denial of service (memory corruption) via a large (1) buffer or (2) size parameter.

In telecom service, there is a missing permission check. This could lead to local denial of service in telecom service.

In thermal service, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service local denial of service with no additional execution privileges.

In telecom service, there is a missing permission check. This could lead to local denial of service in telecom service.

Issue of buffer overflow caused by insufficient data verification in the kernel gyroscope module. Impact: Successful exploitation of this vulnerability may affect availability.

Issue of buffer overflow caused by insufficient data verification in the kernel acceleration module. Impact: Successful exploitation of this vulnerability may affect availability.

ForeScout - SecureConnector Local Service DoS - A low privilaged user which doesn't have permissions to shutdown the secure connector service writes a large amount of characters in the installationPath. This will cause the buffer to overflow and override the stack cookie causing the service to crash.

Dell EMC CloudLink 7.1 and all prior versions contain a Buffer Overflow Vulnerability. A local low privileged attacker, may potentially exploit this vulnerability, leading to an application crash.

The buffer overflow vulnerability in the DX3300-T1 firmware version V5.50(ABVY.4)C0 could allow an authenticated local attacker to cause denial of service (DoS) conditions by executing the CLI command with crafted strings on an affected device.

A stack corruption bug was found in libtpms in versions before 0.7.2 and before 0.8.0 while decrypting data using RSA. This flaw could result in a SIGBUS (bad memory access) and termination of swtpm. The highest threat from this vulnerability is to system availability.

Buffer copy without checking size of input ('Classic Buffer Overflow') vulnerability in cgi component in Synology SSL VPN Client before 1.4.7-0687 allows local users to conduct denial-of-service attacks via unspecified vectors.

jq is a command-line JSON processor. Version 1.7 is vulnerable to heap-based buffer overflow. Version 1.7.1 contains a patch for this issue.

jq is a command-line JSON processor. Version 1.7 is vulnerable to stack-based buffer overflow in builds using decNumber. Version 1.7.1 contains a patch for this issue.

giflib v5.2.1 was discovered to contain a segmentation fault via the component getarg.c.

Buffer Overflow vulnerability in gdal 3.10.2 allows a local attacker to cause a denial of service via the OGRSpatialReference::Release function. NOTE: the Supplier indicates that the report is invalid and could not be reproduced.

in OpenHarmony v5.0.3 and prior versions allow a local attacker cause DOS through buffer overflow.

A buffer overflow vulnerability in the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an authenticated local attacker to cause denial-of-service (DoS) conditions by executing the CLI command to dump system logs on an affected device.

in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through buffer overflow.

in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through buffer overflow.

In sensor driver, there is a possible buffer overflow due to a missing bounds check. This could lead to local denial of service in kernel.

Buffer overflow in the array_from_pyobj function of fortranobject.c in NumPy < 1.19, which allows attackers to conduct a Denial of Service attacks by carefully constructing an array with negative values. NOTE: The vendor does not agree this is a vulnerability; the negative dimensions can only be created by an already privileged user (or internally)

The (1) real_lookup and (2) __lookup_hash functions in fs/namei.c in the vfs implementation in the Linux kernel before 2.6.25.15 do not prevent creation of a child dentry for a deleted (aka S_DEAD) directory, which allows local users to cause a denial of service ("overflow" of the UBIFS orphan area) via a series of attempted file creations within deleted directories.

In sensor driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In sprd_sysdump driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

A segmentation fault (SEGV) was detected in the Assimp::SplitLargeMeshesProcess_Triangle::UpdateNode function within the Assimp library during fuzz testing using AddressSanitizer. The crash occurs due to a read access violation at address 0x000000000460, which points to the zero page, indicating a null or invalid pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer The AD7923 was updated to support devices with 8 channels, but the size of tx_buf and ring_xfer was not increased accordingly, leading to a potential buffer overflow in ad7923_update_scan_mode().

Buffer overflow vulnerability in the component driver module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

In the Linux kernel, the following vulnerability has been resolved: clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access Flexible-array member `hws` in `struct clk_hw_onecell_data` is annotated with the `counted_by()` attribute. This means that when memory is allocated for this array, the _counter_, which in this case is member `num` in the flexible structure, should be set to the maximum number of elements the flexible array can contain, or fewer. In this case, the total number of elements for the flexible array is determined by variable `clks_num` when allocating heap space via `devm_kzalloc()`, as shown below: 289 struct loongson2_clk_provider *clp; ... 296 for (p = data; p->name; p++) 297 clks_num++; 298 299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num), 300 GFP_KERNEL); So, `clp->clk_data.num` should be set to `clks_num` or less, and not exceed `clks_num`, as is currently the case. Otherwise, if data is written into `clp->clk_data.hws[clks_num]`, the instrumentation provided by the compiler won't detect the overflow, leading to a memory corruption bug at runtime. Fix this issue by setting `clp->clk_data.num` to `clks_num`.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix overflow in oa batch buffer By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch buffer, this is not a problem if batch buffer is only used once but oa reuses the batch buffer for the same metric and at each call it appends a MI_BATCH_BUFFER_END, printing the warning below and then overflowing. [ 381.072016] ------------[ cut here ]------------ [ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed! platform: LUNARLAKE subplatform: 1 graphics: Xe2_LPG / Xe2_HPG 20.04 step B0 media: Xe2_LPM / Xe2_HPM 20.00 step B0 tile: 0 VRAM 0 B GT: 0 type 1 So here checking if batch buffer already have MI_BATCH_BUFFER_END if not append it. v2: - simply fix, suggestion from Ashutosh (cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a)