A vulnerability was found in Edimax IC-6220DC and IC-5150W up to 3.06. It has been rated as critical. Affected by this issue is the function cgiFormString of the file ipcam_cgi. The manipulation of the argument host leads to command injection. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the formAccept function in /bin/webs without any limitations.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the setWAN function in /bin/webs without any limitations.

EDIMAX CV7428NS v1.20 was discovered to contain a remote code execution (RCE) vulnerability via the command parameter in the mp function.

A stack-based buffer overflow vulnerability in /bin/webs binary in Edimax BR6478AC V2 firmware veraion v1.23 allows attackers to overwrite other values located on the stack due to an incorrect use of the strcpy() function.

Edimax AC1200 Wave 2 Dual-Band Gigabit Router BR-6478AC V3 1.0.15 was discovered to contain a command injection vulnerability via fota_url in /boafrm/formLtefotaUpgradeQuectel

Edimax IC-7100 does not properly neutralize requests. An attacker can create specially crafted requests to achieve remote code execution on the device

A stack-based buffer-overflow exists in Edimax IP-Camera IC-3116W (v3.06) and IC-3140W (v3.07), which allows an unauthenticated, unauthorized attacker to perform remote-code-execution due to a crafted GET-Request. The overflow occurs in binary ipcam_cgi due to a missing type check in function doGetSysteminfo(). This has been fixed in version: IC-3116W v3.08.

The firmware of EDIMAX IC-3140W Version 3.11 is hardcoded with Administrator username and password.

Edimax AC1200 Wave 2 Dual-Band Gigabit Router BR-6478AC V3_1.0.15 was discovered to contain a command injection vulnerability via the foldername in /boafrm/formDiskCreateShare.

Edimax AC1200 Wave 2 Dual-Band Gigabit Router BR-6478AC V3_1.0.15 was discovered to contain a command injection vulnerability via the groupname at the /boafrm/formDiskCreateGroup.

Edimax AC1200 Wave 2 Dual-Band Gigabit Router BR-6478AC V3 1.0.15 was discovered to contain a command injection vulnerability via partition in /boafrm/formDiskFormat.

Edimax AC1200 Wi-Fi 5 Dual-Band Router BR-6476AC 1.06 suffers from Command Injection issues in /bin/goahead. Specifically, these issues can be triggered through /goform/tracerouteDiagnosis, /goform/pingDiagnosis, and /goform/fromSysToolPingCmd Each of these issues allows an attacker with access to the web interface to inject and execute arbitrary shell commands, with "root" privileges.

EDIMAX BR-6288ACL v1.12 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the pppUserName parameter.

Input passed to the Pdf() function is shell escaped and passed to child_process.exec() during PDF rendering. However, the shell escape does not properly encode all special characters, namely, semicolon and curly braces. This can be abused to achieve command execution. This problem affects nodepdf 1.3.0.

A vulnerability in lack of validation of user-supplied parameters pass to XML-RPC calls on SonicWall Global Management System (GMS) virtual appliance's, allow remote user to execute arbitrary code. This vulnerability affected GMS version 8.1 and earlier.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

D-Link DIR810LA1_FW102B22 was discovered to contain a command injection vulnerability via the Ping_addr function.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Aria Operations for Networks contains a command injection vulnerability. A malicious actor with network access to VMware Aria Operations for Networks may be able to perform a command injection attack resulting in remote code execution.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A pre-auth command injection vulnerability in the warn-proceed handler of Sophos Web Appliance older than version 4.3.10.4 allows execution of arbitrary code.

D-Link DSL-2750B devices before 1.05 allow remote unauthenticated command injection via the login.cgi cli parameter, as exploited in the wild in 2016 through 2022.

(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.

A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. Affected is an unknown function of the component Static Routing Configuration Handler. The manipulation of the argument next-hop-interface leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. VDB-223302 is the identifier assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

A vulnerability, which was classified as critical, has been found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. This issue affects some unknown processing of the component NAT Configuration Handler. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier VDB-223301 was assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

Command Injection in GitHub repository microweber/microweber prior to 1.3.3.

An issue was identified in GitLab CE/EE affecting all versions from 1.0 prior to 15.8.5, 15.9 prior to 15.9.4, and 15.10 prior to 15.10.1 where non-printable characters gets copied from clipboard, allowing unexpected commands to be executed on victim machine.

The isMail transport in PHPMailer before 5.2.20 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code by leveraging improper interaction between the escapeshellarg function and internal escaping performed in the mail function in PHP. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-10033.

A command-injection vulnerability in the Image Upload function of the NASCENT RemKon Device Manager 4.0.0.0 allows attackers to execute arbitrary commands, as root, via shell metacharacters in the filename parameter to assets/index.php.

Baicells EG7035-M11 devices with firmware through BCE-ODU-1.0.8 are vulnerable to improper code exploitation via HTTP GET command injections. Commands are executed using pre-login execution and executed with root permissions. The following methods have been tested and validated by a 3rd party analyst and have been confirmed exploitable special thanks to Lionel Musonza for the discovery.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

A command injection vulnerability in egg-scripts <v2.8.1 allows arbitrary shell command execution through a maliciously crafted command line argument.

A vulnerability was found in TRENDnet TEW-652BRP 3.04b01. It has been classified as critical. Affected is an unknown function of the file ping.ccp of the component Web Interface. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-220020.

Command Injection in GitHub repository thorsten/phpmyfaq prior to 3.1.11.

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the wps_ap_ssid5g parameter

The pdfinfojs NPM module versions <= 0.3.6 has a command injection vulnerability that allows an attacker to execute arbitrary commands on the victim's machine.

A vulnerability has been found in TRENDnet TEW-811DRU 1.0.10.0 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-220018 is the identifier assigned to this vulnerability.

Improper Input Validation vulnerability in ABB Ltd. ASPECT®-Enterprise on ASPECT®-Enterprise, Linux (2CQG103201S3021, 2CQG103202S3021, 2CQG103203S3021, 2CQG103204S3021 modules), ABB Ltd. NEXUS Series on NEXUS Series, Linux (2CQG100102R2021, 2CQG100104R2021, 2CQG100105R2021, 2CQG100106R2021, 2CQG100110R2021, 2CQG100112R2021, 2CQG100103R2021, 2CQG100107R2021, 2CQG100108R2021, 2CQG100109R2021, 2CQG100111R2021, 2CQG100113R2021 modules), ABB Ltd. MATRIX Series on MATRIX Series, Linux (2CQG100102R1021, 2CQG100103R1021, 2CQG100104R1021, 2CQG100105R1021, 2CQG100106R1021 modules) allows Command Injection.This issue affects ASPECT®-Enterprise: from 3.0;0 before 3.07.0; NEXUS Series: from 3.0;0 before 3.07.0; MATRIX Series: from 3.0;0 before 3.07.1.

A vulnerability classified as critical was found in D-Link DI-7300G+ 19.12.25A1. Affected by this vulnerability is an unknown functionality of the file httpd_debug.asp. The manipulation of the argument Time leads to os command injection. The exploit has been disclosed to the public and may be used.

An issue in Dlink DIR-816A2 v.1.10CNB05 allows a remote attacker to execute arbitrary code via the wizardstep4_ssid_2 parameter in the sub_42DA54 function.

An issue in idocv v.14.1.3_20231228 allows a remote attacker to execute arbitrary code and obtain sensitive information via a crafted script.

An issue was discovered on the D-Link DWR-932B router. qmiweb allows command injection with ` characters.

Sublime Text 4 was discovered to contain a command injection vulnerability via the New Build System module. NOTE: multiple third parties report that this is intended behavior.

In Notion Web Clipper 1.0.3(7), a .nib file is susceptible to the Dirty NIB attack. NIB files can be manipulated to execute arbitrary commands. Additionally, even if a NIB file is modified within an application, Gatekeeper may still permit the execution of the application, enabling the execution of arbitrary commands within the application's context. NOTE: the vendor's perspective is that this is simply an instance of CVE-2022-48505, cannot properly be categorized as a product-level vulnerability, and cannot have a product-level fix because it is about incorrect caching of file signatures on macOS.

Zentao v18.0 to v18.10 was discovered to contain a remote code execution (RCE) vulnerability via the checkConnection method of /app/zentao/module/repo/model.php.

A vulnerability, which was classified as critical, has been found in 1Panel up to 1.10.1-lts. Affected by this issue is the function baseApi.UpdateDeviceSwap of the file /api/v1/toolbox/device/update/swap. The manipulation of the argument Path with the input 123123123\nopen -a Calculator leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-256304.