A vulnerability has been identified in OnCell G3150A-LTE Series firmware versions v1.3 and prior. The vulnerability results from lack of protection for sensitive information during transmission. An attacker eavesdropping on the traffic between the web browser and server may obtain sensitive information. This type of attack could be executed to gather sensitive information or to facilitate a subsequent attack against the target.

A vulnerability has been identified in PT-G503 Series firmware versions prior to v5.2, where the Secure attribute for sensitive cookies in HTTPS sessions is not set, which could cause the cookie to be transmitted in plaintext over an HTTP session. The vulnerability may lead to security risks, potentially exposing user session data to unauthorized access and manipulation.

A vulnerability has been identified in PT-G503 Series versions prior to v5.2, where the session cookies attribute is not set properly in the affected application. The vulnerability may lead to security risks, potentially exposing user session data to unauthorized access and manipulation.

A vulnerability has been identified in the ioLogik 4000 Series (ioLogik E4200) firmware versions v1.6 and prior, which can be exploited by malicious actors to potentially gain unauthorized access to the product. This could lead to security breaches, data theft, and unauthorized manipulation of sensitive information. The vulnerability is attributed to the presence of an unauthorized service, which could potentially enable unauthorized access to the. device.

A vulnerability has been identified in ioLogik 4000 Series (ioLogik E4200) firmware versions v1.6 and prior, which has the potential to facilitate the collection of information on ioLogik 4000 Series devices. This vulnerability may enable attackers to gather information for the purpose of assessing vulnerabilities and potential attack vectors.

The lack of access restriction to a resource from unauthorized users makes MXsecurity software versions v1.1.0 and prior vulnerable. By acquiring a valid authenticator, an attacker can pose as an authorized user and successfully access the resource.

MXsecurity software versions v1.1.0 and prior are vulnerable because of the use of hard-coded credentials. This vulnerability could allow an attacker to tamper with sensitive data.

The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower allows sensitive information to be displayed without proper authorization.

Moxa Service in Moxa NPort 5150A firmware version 1.5 and earlier allows attackers to obtain sensitive configuration values via a crafted packet to UDP port 4800. NOTE: Moxa Service is an unauthenticated service that runs upon a first-time installation but can be disabled without ill effect.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. An attacker can access sensitive information (e.g., conduct username disclosure attacks) on the built-in WEB-service without authorization.

An exploitable information disclosure vulnerability exists in the serviceAgent functionality of Moxa AWK-3131A Wireless Access Point running firmware 1.1. A specially crafted TCP query will allow an attacker to retrieve potentially sensitive information.

An exploitable information disclosure vulnerability exists in the Web Application functionality of the Moxa AWK-3131A wireless access point running firmware 1.1. Retrieving a specific URL without authentication can reveal sensitive information to an attacker.

An exploitable Information Disclosure vulnerability exists in the Web Application functionality of Moxa AWK-3131A Series Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client. Retrieving a specific URL without authentication can reveal sensitive information to an attacker.

An information disclosure vulnerability exists in the web application functionality of Moxa SDS-3008 Series Industrial Ethernet Switch 2.1. A specially-crafted HTTP request can lead to a disclosure of sensitive information. An attacker can send an HTTP request to trigger this vulnerability.

Observable Response Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

A vulnerability, which was classified as problematic, was found in viafintech Barzahlen Payment Module PHP SDK up to 2.0.0. Affected is the function verify of the file src/Webhook.php. The manipulation leads to observable timing discrepancy. The complexity of an attack is rather high. The exploitability is told to be difficult. Upgrading to version 2.0.1 is able to address this issue. The patch is identified as 3e7d29dc0ca6c054a6d6e211f32dae89078594c1. It is recommended to upgrade the affected component. VDB-217650 is the identifier assigned to this vulnerability.

Observable Timing Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

User enumeration vulnerability in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 8, 7.2 before fix pack 20, and older unsupported versions allows remote attackers to determine if an account exist in the application by comparing the request's response time.

Observable Discrepancy in GitHub repository healthchecks/healthchecks prior to v2.6.

User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

The open-source identity infrastructure software Zitadel allows administrators to disable the user self-registration. Versions 4.0.0 to 4.0.2, 3.0.0 to 3.3.6, and all versions prior to 2.71.15 are vulnerable to a username enumeration issue in the login interface. The login UI includes a security feature, Ignoring unknown usernames, that is intended to prevent username enumeration by returning a generic response for both valid and invalid usernames. This vulnerability allows an unauthenticated attacker to bypass this protection by submitting arbitrary userIDs to the select account page and distinguishing between valid and invalid accounts based on the system's response. For effective exploitation, an attacker needs to iterate through possible userIDs, but the impact can be limited by implementing rate limiting or similar measures. The issue has been patched in versions 4.0.3, 3.4.0, and 2.71.15.

An user enumeration vulnerability was found in SEO Panel 4.10.0. This issue occurs during user authentication, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

Pimcore is an open source data & experience management platform. In versions prior to 10.1.3, it is possible to enumerate usernames via the forgot password functionality. This issue is fixed in version 10.1.3. As a workaround, one may apply the available patch manually.

OPEXUS FOIAXpress Public Access Link (PAL) version v11.1.0 allows an unauthenticated, remote attacker to query the /App/CreateRequest.aspx endpoint to check for the existence of valid usernames. There are no rate-limiting mechanisms in place.

Kanboard is project management software that focuses on the Kanban methodology. Prior to version 1.2.46, Kanboard is vulnerable to username enumeration and IP spoofing-based brute-force protection bypass. By analyzing login behavior and abusing trusted HTTP headers, an attacker can determine valid usernames and circumvent rate-limiting or blocking mechanisms. Any organization running a publicly accessible Kanboard instance is affected, especially if relying on IP-based protections like Fail2Ban or CAPTCHA for login rate-limiting. Attackers with access to the login page can exploit this flaw to enumerate valid usernames and bypass IP-based blocking mechanisms, putting all user accounts at higher risk of brute-force or credential stuffing attacks. Version 1.2.46 contains a patch for the issue.

The Page Restriction WordPress (WP) – Protect WP Pages/Post plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.3.6 via the WordPress core search feature. This makes it possible for unauthenticated attackers to extract sensitive data from posts that have been restricted to higher-level roles such as administrator.

Tuleap is an Open Source Suite created to facilitate management of software development and collaboration. In Tuleap Community Edition prior to version 16.9.99.1750843170 and Tuleap Enterprise Edition prior to 16.8-4 and 16.9-2, the forgot password form allows for user enumeration. This is fixed in Tuleap Community Edition version 16.9.99.1750843170 and Tuleap Enterprise Edition 16.8-4 and 16.9-2.

Meow hash 0.5/calico does not sufficiently thwart key recovery by an attacker who can query whether there's a collision in the bottom bits of the hashes of two messages, as demonstrated by an attack against a long-running web service that allows the attacker to infer collisions by measuring timing differences.

User enumeration vulnerability in Devklan's Alma Blog that affects versions 2.1.10 and earlier. This vulnerability could allow a remote user to retrieve all valid users registered in the application just by looking at the request response.

For failed login attempts, the application returns different error messages depending on whether the login failed due to an incorrect password or a non-existing username. This allows an attacker to guess usernames until they find an existing one.

Under certain circumstances a CCURE Portal user could enumerate user accounts in CCURE 9000 version 2.90 and prior versions.

Using iterative requests an attacker was able to learn the size of an opaque response, as well as the contents of a server-supplied Vary header. This vulnerability affects Firefox < 119.

Umbraco is a free and open source .NET content management system. Prior to versions 10.8.10 and 13.8.1, based on an analysis of the timing of post login API responses, it's possible to determine whether an account exists. The issue is patched in versions 10.8.10 and 13.8.1. No known workarounds are available.

A vulnerability has been identified in Mendix Runtime V10 (All versions < V10.17.0 only if the basic authentication mechanism is used by the application), Mendix Runtime V10.12 (All versions < V10.12.11 only if the basic authentication mechanism is used by the application), Mendix Runtime V10.6 (All versions < V10.6.19 only if the basic authentication mechanism is used by the application), Mendix Runtime V8 (All versions < V8.18.33 only if the basic authentication mechanism is used by the application), Mendix Runtime V9 (All versions < V9.24.31 only if the basic authentication mechanism is used by the application). The authentication mechanism of affected applications contains an observable response discrepancy vulnerability when validating usernames. This could allow unauthenticated remote attackers to distinguish between valid and invalid usernames.

The Stop User Enumeration WordPress plugin before version 1.7.3 blocks REST API /wp-json/wp/v2/users/ requests for non-authorized users. However, this can be bypassed by URL-encoding the API path.

Observable behavioral discrepancy vulnerability in QSAN Storage Manager allows remote attackers to obtain the system information without permissions. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

Redmine before 4.0.9 and 4.1.x before 4.1.3 allows an attacker to learn the values of internal authentication keys by observing timing differences in string comparison operations within SysController and MailHandlerController.

IBM Security Identity Manager 7.0.2 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 200018

UrBackup Server 2.5.31 allows brute-force enumeration of user accounts because a failure message confirms that a username is not valid.

Flask-AppBuilder is a development framework, built on top of Flask. User enumeration in database authentication in Flask-AppBuilder <= 3.2.3. Allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Upgrade to version 3.3.0 or higher to resolve.

A vulnerability has been identified in Mendix Forgot Password (Mendix 10 compatible) (All versions < V5.4.0), Mendix Forgot Password (Mendix 7 compatible) (All versions < V3.7.3), Mendix Forgot Password (Mendix 8 compatible) (All versions < V4.1.3), Mendix Forgot Password (Mendix 9 compatible) (All versions < V5.4.0). Applications using the affected module are vulnerable to user enumeration due to distinguishable responses. This could allow an unauthenticated remote attacker to determine if a user is valid or not, enabling a brute force attack with valid users.

Piccolo is an ORM and query builder which supports asyncio. In versions 0.120.0 and prior, the implementation of `BaseUser.login` leaks enough information to a malicious user such that they would be able to successfully generate a list of valid users on the platform. As Piccolo on its own does not also enforce strong passwords, these lists of valid accounts are likely to be used in a password spray attack with the outcome being attempted takeover of user accounts on the platform. The impact of this vulnerability is minor as it requires chaining with other attack vectors in order to gain more then simply a list of valid users on the underlying platform. The likelihood of this vulnerability is possible as it requires minimal skills to pull off, especially given the underlying login functionality for Piccolo based sites is open source. This issue has been patched in version 0.121.0.

In Directus 8.x through 8.8.1, an attacker can discover whether a user is present in the database through the password reset feature. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Zitadel is open-source identity infrastructure software. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". While the setting was correctly respected during the login flow, the user's username was normalized leading to a disclosure of the user's existence. This vulnerability is fixed in 2.71.6, 2.70.8, 2.69.9, 2.68.9, 2.67.13, 2.66.16, 2.65.7, 2.64.6, and 2.63.9.

Snipe-IT through 6.0.14 allows attackers to check whether a user account exists because of response variations in a /password/reset request.

goauthentik is an open-source Identity Provider. In affected versions using a recovery flow with an identification stage an attacker is able to determine if a username exists. Only setups configured with a recovery flow are impacted by this. Anyone with a user account on a system with the recovery flow described above is susceptible to having their username/email revealed as existing. An attacker can easily enumerate and check users' existence using the recovery flow, as a clear message is shown when a user doesn't exist. Depending on configuration this can either be done by username, email, or both. This issue has been addressed in versions 2023.5.6 and 2023.6.2. Users are advised to upgrade. There are no known workarounds for this issue.

The commit 3730880 (April 2023) and v.0.9-beta1 of gugoan Economizzer has a user enumeration vulnerability in the login and forgot password functionalities. The app reacts differently when a user or email address is valid, and when it's not. This may allow an attacker to determine whether a user or email address is valid, or brute force valid usernames and email addresses.

An issue was discovered in OpenSlides before 4.2.5. During login at the /system/auth/login/ endpoint, the system's response times differ depending on whether a user exists in the system. The timing discrepancy stems from the omitted hashing of the password (e.g., more than 100 milliseconds).

A vulnerability has been identified in Mendix Runtime V10 (All versions < V10.21.0), Mendix Runtime V10.12 (All versions < V10.12.16), Mendix Runtime V10.18 (All versions < V10.18.5), Mendix Runtime V10.6 (All versions < V10.6.22), Mendix Runtime V8 (All versions < V8.18.35), Mendix Runtime V9 (All versions < V9.24.34). Affected applications allow for entity enumeration due to distinguishable responses in certain client actions. This could allow an unauthenticated remote attacker to list all valid entities and attribute names of a Mendix Runtime-based application.