IBM Engineering Lifecycle Optimization - Publishing 6.0.6, 6.0.6.1, 7.0, 7.0.1, and 7.0.2 could disclose highly sensitive information through an HTTP GET request to an authenticated user. IBM X-Force ID: 213728.

IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.6.0 could allow an authenticated user to obtain sensitive information from a specially crafted HTTP request. IBM X-Force ID: 216387.

IBM System Storage Virtualization Engine TS7700 3957-VEC, 3948-VED and 3957-VEC could allow a remote authenticated user to obtain sensitive information, caused by improper filtering of URLs. By submitting a specially crafted HTTP GET request, an attacker could exploit this vulnerability to view application source code, system configuration information, or other sensitive data related to the Management Interface. IBM X-Force ID: 272651.

Microsoft SharePoint Server Information Disclosure Vulnerability

IBM SAN Volume Controller, IBM Storwize, IBM Spectrum Virtualize and IBM FlashSystem products ( 6.1, 6.2, 6.3, 6.4, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6, 7.6.1, 7.7, 7.7.1, 7.8, 7.8.1, 8.1, and 8.1.1) could allow an authenticated user to obtain sensitive information that they should not have authorization to read. IBM X-Force ID: 140395.

IBM Qradar SIEM 7.5 could allow a privileged user to obtain sensitive domain information due to data being misidentified. IBM X-Force ID: 270372.

A vulnerability in IBM Robotic Process Automation and IBM Robotic Process Automation for Cloud Pak 21.0.0 through 21.0.7.10, 23.0.0 through 23.0.10 may result in access to client vault credentials. This difficult to exploit vulnerability could allow a low privileged attacker to programmatically access client vault credentials. IBM X-Force ID: 268752.

IBM Rational Collaborative Lifecycle Management 6.0 through 6.0.6.1 discloses sensitive information in error messages that may be used by a malicious user to orchestrate further attacks. IBM X-Force ID: 147838.

IBM QRadar SIEM 7.5 is vulnerable to information exposure allowing a delegated Admin tenant user with a specific domain security profile assigned to see data from other domains. This vulnerability is due to an incomplete fix for CVE-2022-34352. IBM X-Force ID: 266808.

Microsoft SharePoint Server Information Disclosure Vulnerability

IBM Robotic Process Automation for Cloud Pak 21.0.0 through 21.0.7.4 and 23.0.0 through 23.0.5 is vulnerable to disclosing server version information which may be used to determine software vulnerabilities at the operating system level. IBM X-Force ID: 259368.

IBM TXSeries for Multiplatforms 8.1, 8.2, 9.1, CICS TX Standard, 11.1, CICS TX Advanced 10.1, and 11.1 could allow a privileged user to obtain highly sensitive information by enabling debug mode. IBM X-Force ID: 257104.

IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite Software 1.10.12.0 through 1.10.16.0could allow an authenticated user to obtain sensitive version information that could aid in further attacks against the system. IBM X-Force ID: 233665.

IBM QRadar SIEM 7.5.0 is vulnerable to information exposure allowing a delegated Admin tenant user with a specific domain security profile assigned to see data from other domains. IBM X-Force ID: 230403.

IBM Security Directory Suite VA 8.0.1 through 8.0.1.19 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 228567.

IBM Robotic Process Automation 20.10.0, 20.12.5, 21.0.0, 21.0.1, and 21.0.2 contains a vulnerability that could allow a user to obtain sensitive information due to information properly masked in the control center UI. IBM X-Force ID: 227294.

IBM Planning Analytics 2.0 could allow a remote authenticated attacker to obtain information about an organization's internal structure by exposing sensitive information in HTTP repsonses. IBM X-Force ID: 192029.

IBM Cloud Pak for Security (CP4S) 1.3.0.1 could disclose sensitive information through HTTP headers which could be used in further attacks against the system. IBM X-Force ID: 192425.

IBM Planning Analytics Local 2.0.9.2 and IBM Planning Analytics Workspace 57 could expose data to non-privleged users by not invalidating TM1Web user sessions. IBM X-Force ID: 186022.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.7 and 6.1.0.0 through 6.1.2.1 could allow a privileged user to obtain sensitive information that could aid in further attacks against the system. IBM X-Force ID: 244364.

An information leak flaw was found in NFS over RDMA in the net/sunrpc/xprtrdma/rpc_rdma.c in the Linux Kernel. This flaw allows an attacker with normal user privileges to leak kernel information.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to sensitive information disclosure when using ADMIN_CMD with IMPORT or EXPORT.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.1.2.1 could disclose sensitive information to an authenticated user. IBM X-Force ID: 219507.

IBM Cognos Controller 10.2.0, 10.2.1, 10.3.0, 10.3.1, and 10.4.0 could allow a remote attacker to obtain sensitive information, caused by a flaw in the HTTP OPTIONS method, aka Optionsbleed. By sending an OPTIONS HTTP request, a remote attacker could exploit this vulnerability to read secret data from process memory and obtain sensitive information. IBM X-Force ID: 158878.

IBM Cloud Orchestrator and IBM Cloud Orchestrator Enterprise 2.5 through 2.5.0.9 and 2.4 through 2.4.0.5 stores sensitive information in URL parameters. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referrer header or browser history. IBM X-Force ID: 162239

IBM Robotic Process Automation 21.0.1 through 21.0.5 is vulnerable to insufficiently protecting credentials. Queue Provider credentials are not obfuscated while editing queue provider details. IBM X-Force ID: 247032.

IBM Cloud Pak for Security (CP4S) 1.7.2.0, 1.7.1.0, and 1.7.0.0 could allow an authenticated user to obtain sensitive information in HTTP responses that could be used in further attacks against the system. IBM X-Force ID: 213651.

An information disclosure vulnerability in Android Apps using Microsoft Authentication Library (MSAL) 0.3.1-Alpha or later exists under specific conditions, aka 'Microsoft Authentication Library for Android Information Disclosure Vulnerability'.

IBM Planning Analytics 2.0 could allow a remote attacker to obtain sensitive information by disclosing private IP addresses in HTTP responses. IBM X-Force ID: 178766.

A security issue was discovered in the kube-state-metrics versions v1.7.0 and v1.7.1. An experimental feature was added to the v1.7.0 release that enabled annotations to be exposed as metrics. By default, the kube-state-metrics metrics only expose metadata about Secrets. However, a combination of the default `kubectl` behavior and this new feature can cause the entire secret content to end up in metric labels thus inadvertently exposing the secret content in metrics. This feature has been reverted and released as the v1.7.2 release. If you are running the v1.7.0 or v1.7.1 release, please upgrade to the v1.7.2 release as soon as possible.

IBM Marketing Platform 9.1.0, 9.1.2, 10.0, and 10.1 exposes sensitive information in the headers that could be used by an authenticated attacker in further attacks against the system. IBM X-Force ID: 120906.

An information disclosure vulnerability exists when the Microsoft Exchange PowerShell API grants calendar contributors more view permissions than intended, aka "Microsoft Exchange Information Disclosure Vulnerability." This affects Microsoft Exchange Server.

An information disclosure vulnerability exists in the way that the Windows SMB Server handles certain requests, aka 'Windows SMB Information Disclosure Vulnerability'. This CVE ID is unique from CVE-2019-0704, CVE-2019-0821.

IBM QRadar SIEM 7.3, 7.4, and 7.5 allows for users to access information across tenant and domain boundaries in some situations. IBM X-Force ID: 208397.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.5, 6.1.0.0 through 6.1.0.4, and 6.1.1.0 through 6.1.1.1 could allow an authenticated user to obtain sensitive information due to improper permission controls. IBM X-Force ID: 216109.

IBM OpenPages 8.3 and 9.0 potentially exposes information about client-side source code through use of JavaScript source maps to unauthorized users.

IBM Business Process Manager 8.5 and 8.6 and IBM Business Automation Workflow 18.0, 19.0, 20.0 and 21.0 could allow a privileged user to obtain highly sensitive information due to improper access controls. IBM X-Force ID: 209607.

IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.1, and 11.5 is vulnerable to an information disclosure as a result of a connected user having indirect read access to a table where they are not authorized to select from. IBM X-Force ID: 210418.

Windows Distributed File System (DFS) Information Disclosure Vulnerability

IBM InfoSphere Information Server 11.7 could allow an authenticated user to obtain sensitive information from application response requests that could be used in further attacks against the system. IBM X-Force ID: 209401.

Windows Ancillary Function Driver for WinSock Information Disclosure Vulnerability

IBM Engineering Lifecycle Optimization - Publishing 6.0.6, 6.0.6.1, 7.0, 7.0.1, and 7.0.2 could disclose sensitive information in a SQL error message that could aid in further attacks against the system. IBM X-Force ID: 213726.

Copy_from_user on 64-bit versions of the Linux kernel does not implement the __uaccess_begin_nospec allowing a user to bypass the "access_ok" check and pass a kernel pointer to copy_from_user(). This would allow an attacker to leak information. We recommend upgrading beyond commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47

IBM Cognos Controller 11.0.0 through 11.0.1 and IBM Controller 11.1.0 could allow a remote attacker to obtain sensitive information when a stack trace is returned in the browser.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.5 and 6.1.0.0 through 6.1.1.0 could disclose sensitive version information that could aid in future attacks against the system. IBM X-Force ID: 211414.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 could allow an authenticated user to to obtain sensitive information from a specially crafted HTTP request. IBM X-Force ID: 212780.

IBM UrbanCode Deploy (UCD) 7.0 through 7.0.5.20, 7.1 through 7.1.2.16, 7.2 through 7.2.3.9, 7.3 through 7.3.2.4 and IBM DevOps Deploy 8.0 through 8.0.0.1 is vulnerable to a sensitive information due to insufficient obfuscation of sensitive values from some log files. IBM X-Force ID: 279979.

IBM Data Risk Manager 2.0.6 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 209947.

IBM InfoSphere Information Server 11.7 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 280361.

Microsoft Message Queuing Information Disclosure Vulnerability