The Palantir Tiles1 service was found to be vulnerable to an API wide issue where the service was not performing authentication/authorization on all the endpoints.

EdgeX Foundry is an open source project for building a common open framework for internet-of-things edge computing. A vulnerability exists in the Edinburgh, Fuji, Geneva, and Hanoi versions of the software. When the EdgeX API gateway is configured for OAuth2 authentication and a proxy user is created, the client_id and client_secret required to obtain an OAuth2 authentication token are set to the username of the proxy user. A remote network attacker can then perform a dictionary-based password attack on the OAuth2 token endpoint of the API gateway to obtain an OAuth2 authentication token and use that token to make authenticated calls to EdgeX microservices from an untrusted network. OAuth2 is the default authentication method in EdgeX Edinburgh release. The default authentication method was changed to JWT in Fuji and later releases. Users should upgrade to the EdgeX Ireland release to obtain the fix. The OAuth2 authentication method is disabled in Ireland release. If unable to upgrade and OAuth2 authentication is required, users should create OAuth2 users directly using the Kong admin API and forgo the use of the `security-proxy-setup` tool to create OAuth2 users.

Incorrect Behaviour of Views with TCP PROXY Requests

DASAN GPON ONU H660WM H660WMR210825 is susceptible to improper access control under its default settings. Attackers can exploit this vulnerability to gain unauthorized access to sensitive information and modify its configuration via the UPnP protocol WAN sides without any authentication.

A vulnerability in the Cloud Connect component of Cisco Unified Contact Center Enterprise (CCE) could allow an unauthenticated, remote attacker to read and modify data on an affected device. This vulnerability is due to a lack of proper authentication controls. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port on an affected device. A successful exploit could allow the attacker to read or modify data on the affected device.

A vulnerability classified as problematic has been found in Totolink T6 4.1.9cu.5241_B20210923. This affects an unknown part of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument topicurl with the input showSyslog leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249867. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the IPv6 traffic processing of Cisco IOS XR Software and Cisco NX-OS Software for certain Cisco devices could allow an unauthenticated, remote attacker to bypass an IPv6 access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to improper processing of IPv6 traffic that is sent through an affected device. An attacker could exploit this vulnerability by sending crafted IPv6 packets that traverse the affected device. A successful exploit could allow the attacker to access resources that would typically be protected by the interface ACL.

Various administrative external system import resources in Atlassian JIRA Server (including JIRA Core) before version 7.6.5, from version 7.7.0 before version 7.7.3, from version 7.8.0 before version 7.8.3 and before version 7.9.0 allow remote attackers to run import operations and to determine if an internal service exists through missing permission checks.

Improper access control in Citrix ADC and Citrix Gateway versions before 13.0-58.30, 12.1-57.18, 12.0-63.21, 11.1-64.14 and 10.5-70.18 and Citrix SDWAN WAN-OP versions before 11.1.1a, 11.0.3d and 10.2.7 allows unauthenticated access to certain URL endpoints.

A CWE-284 Improper Access Control vulnerability exists in EcoStruxure Building Operation WebReports V1.9 - V3.1 that could cause a remote attacker being able to access a restricted web resources due to improper access control.

Vulnerability in the Oracle Life Sciences InForm product of Oracle Life Science Applications (component: App Server). Supported versions that are affected are 7.0.1.0 and 7.0.1.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Life Sciences InForm. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Life Sciences InForm accessible data as well as unauthorized read access to a subset of Oracle Life Sciences InForm accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N).

Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Security). Supported versions that are affected are Oracle Java SE: 8u491, 8u491-perf, 11.0.31, 17.0.19, 21.0.11, 25.0.3, 26.0.1; Oracle GraalVM for JDK: 17.0.19 and 21.0.11; Oracle GraalVM Enterprise Edition: 21.3.18. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N).

A vulnerability was detected in macrozheng mall up to 1.0.3. Affected by this issue is the function delete of the file /member/readHistory/delete. Performing manipulation of the argument ids results in improper access controls. Remote exploitation of the attack is possible. The exploit is now public and may be used.

Coturn is a free open source implementation of TURN and STUN Server. Coturn is commonly configured to block loopback and internal ranges using "denied-peer-ip" and/or default loopback restrictions. CVE-2020-26262 addressed bypasses involving "0.0.0.0", "[::1]" and "[::]", but IPv4-mapped IPv6 is not covered. When sending a "CreatePermission" or "ChannelBind" request with the "XOR-PEER-ADDRESS" value of "::ffff:127.0.0.1", a successful response is received, even though "127.0.0.0/8" is blocked via "denied-peer-ip". The root cause is that, prior to the updated fix implemented in version 4.9.0, three functions in "src/client/ns_turn_ioaddr.c" do not check "IN6_IS_ADDR_V4MAPPED". "ioa_addr_is_loopback()" checks "127.x.x.x" (AF_INET) and "::1" (AF_INET6), but not "::ffff:127.0.0.1." "ioa_addr_is_zero()" checks "0.0.0.0" and "::", but not "::ffff:0.0.0.0." "addr_less_eq()" used by "ioa_addr_in_range()" for "denied-peer-ip" matching: when the range is AF_INET and the peer is AF_INET6, the comparison returns 0 without extracting the embedded IPv4. Version 4.9.0 contains an updated fix to address the bypass of the fix for CVE-2020-26262.

In PrestaShop between versions 1.5.5.0 and 1.7.6.5, there is improper access control on customers search. The problem is fixed in 1.7.6.5.

In PrestaShop between versions 1.7.0.0 and 1.7.6.5, there are improper access controls on product page with combinations, attachments and specific prices. The problem is fixed in 1.7.6.5.

MH-WikiBot (an IRC Bot for interacting with the Miraheze API), had a bug that allowed any unprivileged user to access the steward commands on the IRC interface by impersonating the Nickname used by a privileged user as no check was made to see if they were logged in. The issue has been fixed in commit 23d9d5b0a59667a5d6816fdabb960b537a5f9ed1.

"In PrestaShop between versions 1.7.0.0 and 1.7.6.5, there is improper access controls on product attributes page. The problem is fixed in 1.7.6.5.

Capgo before 12.128.2 contains an unsecured images bucket lacking any row level security controls, allowing unauthenticated attackers to read, insert, and delete stored app icons. Remote attackers can exploit this misconfiguration to delete all icons and leak sensitive app IDs and user IDs.

The MStore API – Create Native Android & iOS Apps On The Cloud plugin for WordPress is vulnerable to unauthorized user registration in all versions up to, and including, 4.15.3. This is due to the plugin not checking that user registration is enabled prior to creating a user account through the register() function. This makes it possible for unauthenticated attackers to create user accounts on sites, even when user registration is disabled and plugin functionality is not activated.

Incorrect access control in M2Soft CROWNIX Report & ERS affected v7.x to v7.4.3.599 and v8.x to v8.0.3.79 allows unauthorized attackers to obtain Administrator account access.

Incorrect access control in the component /iclock/Settings?restartNCS=1 of NovaCHRON Zeitsysteme GmbH & Co. KG Smart Time Plus v8.x to v8.6 allows attackers to arbitrarily restart the NCServiceManger via a crafted GET request.

This improper access control vulnerability in Helpdesk allows attackers to get control of QNAP Kayako service. Attackers can access the sensitive data on QNAP Kayako server with API keys. We have replaced the API key to mitigate the vulnerability, and already fixed the issue in Helpdesk 3.0.1 and later versions.

Incorrect access control in the prehandle function of Rebuild v3.7.7 allows attackers to bypass authentication via a crafted GET request sent to /commons/ip-location.

Windows Remote Desktop Services Tampering Vulnerability

Ghost is a Node.js content management system. Improper authentication on some endpoints used for member actions would allow an attacker to perform member-only actions, and read member information. This security vulnerability is present in Ghost v4.46.0-v5.89.4. v5.89.5 contains a fix for this issue.

On EX4300, EX4600, QFX3500, and QFX5100 Series, a vulnerability in the IP firewall filter component may cause the firewall filter evaluation of certain packets to fail. This issue only affects firewall filter evaluation of certain packets destined to the device Routing Engine (RE). This issue does not affect the Layer 2 firewall filter evaluation nor does it affect the Layer 3 firewall filter evaluation destined to connected hosts. This issue may occur when evaluating both IPv4 or IPv6 packets. This issue affects Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D12 on QFX5100 Series and EX4600 Series; 14.1X53 versions prior to 14.1X53-D52 on QFX3500 Series; 14.1X53 versions prior to 14.1X53-D48 on EX4300 Series; 15.1 versions prior to 15.1R7-S3 on EX4300 Series; 16.1 versions prior to 16.1R7 on EX4300 Series; 17.1 versions prior to 17.1R3 on EX4300 Series; 17.2 versions prior to 17.2R3 on EX4300 Series; 17.3 versions prior to 17.3R2-S5, 17.3R3 on EX4300 Series; 17.4 versions prior to 17.4R2 on EX4300 Series; 18.1 versions prior to 18.1R3 on EX4300 Series; 18.2 versions prior to 18.2R2 on EX4300 Series.

Vulnerability in the Identity Manager product of Oracle Fusion Middleware (component: End User Self Service). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via IIOP to compromise Identity Manager. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Identity Manager accessible data as well as unauthorized read access to a subset of Identity Manager accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N).

OpenOrange Business Framework version 1.15.5 installs to a directory with overly permissive access control, allowing all authenticated users to write to the installation path. In combination with the application's behavior of loading DLLs from this location, this allows for DLL hijacking and may result in arbitrary code execution and privilege escalation.

The Masteriyo LMS WordPress plugin before 2.2.1 does not perform authorization checks in a course-progress REST API controller, allowing unauthenticated users to read and permanently delete any user's course-progress records.

In Bonitasoft runtime Community edition, the lack of dynamic permissions causes IDOR vulnerability. Dynamic permissions existed only in Subscription edition and have now been restored in Community edition, where they are not custmizable.

A vulnerability in the Traversal Using Relays around NAT (TURN) server component of Cisco Expressway software could allow an unauthenticated, remote attacker to bypass security controls and send network traffic to restricted destinations. The vulnerability is due to improper validation of specific connection information by the TURN server within the affected software. An attacker could exploit this issue by sending specially crafted network traffic to the affected software. A successful exploit could allow the attacker to send traffic through the affected software to destinations beyond the application, possibly allowing the attacker to gain unauthorized network access.

Medical Management System a81df1ce700a9662cb136b27af47f4cbde64156b is vulnerable to Insecure Permissions, which allows arbitrary user password reset.

An issue was discovered in the fp_masterquiz (aka Master-Quiz) extension before 2.2.1, and 3.x before 3.5.1, for TYPO3. An attacker can continue the quiz of a different user. In doing so, the attacker can view that user's answers and modify those answers.

An authentication bypass vulnerability exists in the cgiserver.cgi Login functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to authentication bypass. An attacker can send an HTTP request to trigger this vulnerability.

Insecure permissions in Splashin iOS v2.0 allow unauthorized attackers to access location data for specific users.

BusyBox wget thru 1.3.7 accepted raw CR (0x0D)/LF (0x0A) and other C0 control bytes in the HTTP request-target (path/query), allowing the request line to be split and attacker-controlled headers to be injected. To preserve the HTTP/1.1 request-line shape METHOD SP request-target SP HTTP/1.1, a raw space (0x20) in the request-target must also be rejected (clients should use %20).

Escalade GLPI plugin is a ticket escalation process helper for GLPI. Prior to version 2.9.11, there is an improper access control vulnerability. This can lead to data exposure and workflow disruptions. This issue has been patched in version 2.9.11.

Default credentials in Each Italy Wireless Mini Router WIRELESS-N 300M v28K.MiniRouter.20190211 allows attackers to gain access to the debug shell exposed via Telnet on Port 23 and execute hardware-level flash and register manipulation commands.

A vulnerability classified as critical has been found in SourceCodester Student Result Management System 1.0. This affects an unknown part of the file /admin/core/new_user of the component Register Interface. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Intelbras RX1500 Router v2.2.17 and before is vulnerable to Incorrect Access Control in the FirmwareUpload function and GetFirmwareValidation function.

Incorrect access control in Software GmbH Agorum core open v11.9.2 & v11.10.1 allows authenticated attackers to escalate privileges to Administrator and access sensitive components and information.

A vulnerability has been discovered in eladmin v2.7 and before. This vulnerability allows for an arbitrary user password reset under any user permission level.

Vedo Suite 2024.17 is vulnerable to Incorrect Access Control, which allows remote attackers to obtain a valid high privilege JWT token without prior authentication via sending an empty HTTP POST request to the /autologin/ API endpoint.

Incorrect access control in CaricaVerbale in Agenzia Impresa Eccobook v2.81.1 allows authenticated attackers with low-level access to escalate privileges to Administrator.

Incorrect access control in the dynawebservice component of agorum Software GmbH Agorum core open v11.9.2 & v11.10.1 allows unauthenticated attackers to access arbitrary files on the system.

An issue was discovered in CPUID cpuz.sys 1.0.5.4. An attacker can use DeviceIoControl with the unvalidated parameters 0x9C402440 and 0x9C402444 as IoControlCodes to perform RDMSR and WRMSR, respectively. Through this process, the attacker can modify MSR_LSTAR and hook KiSystemCall64. Afterward, using Return-Oriented Programming (ROP), the attacker can manipulate the stack with pre-prepared gadgets, disable the SMAP flag in the CR4 register, and execute a user-mode syscall handler in the kernel context. It has not been confirmed whether this works on 32-bit Windows, but it functions on 64-bit Windows if the core isolation feature is either absent or disabled.

This advisory documents the impact of an internally found vulnerability in Arista EOS for security ACL bypass. The impact of this vulnerability is that the security ACL drop rule might be bypassed if a NAT ACL rule filter with permit action matches the packet flow. This could allow a host with an IP address in a range that matches the range allowed by a NAT ACL and a range denied by a Security ACL to be forwarded incorrectly as it should have been denied by the Security ACL. This can enable an ACL bypass.

Lack of access controls in the 'ate' management binary of the Tenda RX2 Pro 16.03.30.14 allows an unauthenticated remote attacker to perform unauthorized configuration changes for any router where 'ate' has been enabled by sending a crafted UDP packet

Vulnerability in the Oracle Teleservice product of Oracle E-Business Suite (component: Service Diagnostics Scripts). Supported versions that are affected are 12.2.3-12.215. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Teleservice. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Teleservice accessible data as well as unauthorized read access to a subset of Oracle Teleservice accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N).