An issue was discovered in ADTRAN PMAA 1.6.2-1, 1.6.3, and 1.6.4. NETCONF Access Management (NACM) allows unprivileged users to create privileged users and execute arbitrary commands via the use of the diagnostic-profile over RESTCONF.

A command injection vulnerability in the web interface of Adtran 411 ONT L80.00.0011.M2 allows attackers to escalate privileges to root and execute arbitrary commands.

AdTran 834-5 HDC17600021F1 (SmartOS 11.1.1.1) devices enable the SSH service by default and have a hidden, undocumented, hard-coded support account whose password is based on the devices MAC address. All of the devices internet interfaces share a similar MAC address that only varies in their final octet. This allows network-adjacent attackers to derive the support user's SSH password by decrementing the final octet of the connected gateway address or via the BSSID. An attacker can then execute arbitrary OS commands with root-level privileges. NOTE: The vendor states that there is no intended functionality allowing an attacker to execute arbitrary OS Commands with root-level privileges. The vendor also states that this issue was fixed in SmartOS 12.5.5.1.

Adtran 834-5 11.1.0.101-202106231430, and fixed as of SmartOS Version 12.6.3.1, devices allow OS Command Injection via shell metacharacters to the Ping or Traceroute utility.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with administrative privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input to the web UI. A successful exploit could allow an attacker to execute arbitrary commands with administrative privileges on an affected device.

Unraid Web Server ToggleState Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Unraid. Authentication is required to exploit this vulnerability. The specific flaw exists within ToggleState.php. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the www-data user. Was ZDI-CAN-30134.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in +F FS010M versions prior to V2.0.1_1101. If this vulnerability is exploited, an arbitrary OS command may be executed by a remote authenticated attacker.

Unraid Web Server FileUpload Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Unraid. Authentication is required to exploit this vulnerability. The specific flaw exists within FileUpload.php. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the www-data user. Was ZDI-CAN-30116.

Quest NetVault Backup NVBULogDaemon Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the processing of NVBULogDaemon JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-27625.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to incorrect input validation of user-supplied data by the NX-API subsystem. An attacker could exploit this vulnerability by sending malicious HTTP or HTTPS packets to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to perform a command-injection attack and execute arbitrary commands with root privileges. Note: NX-API is disabled by default. MDS 9000 Series Multilayer Switches are affected running software versions prior to 8.1(1b) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected running software versions prior to 7.3(4)N1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 7.3(3)D1(1) and 8.2(3).

A vulnerability in the update service of Cisco Webex Meetings Desktop App and Cisco Webex Productivity Tools for Windows could allow an authenticated, local attacker to execute arbitrary commands as a privileged user. The vulnerability is due to insufficient validation of user-supplied parameters. An attacker could exploit this vulnerability by invoking the update service command with a crafted argument. An exploit could allow the attacker to run arbitrary commands with SYSTEM user privileges. While the CVSS Attack Vector metric denotes the requirement for an attacker to have local access, administrators should be aware that in Active Directory deployments, the vulnerability could be exploited remotely by leveraging the operating system remote management tools. This vulnerability is fixed in Cisco Webex Meetings Desktop App Release 33.6.6 and 33.9.1 releases. This vulnerability is fixed in Cisco Webex Productivity Tools Release 33.0.7.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the save command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the save command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user.

A vulnerability in the vManage web-based UI (Web UI) in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the vManage Web UI. A successful exploit could allow the attacker to execute commands with root privileges.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during the SMTP configuration tests resulting in command execution

Cohesive Networks VNS3 Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Cohesive Networks VNS3. Authentication is required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 8000 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24177.

Cohesive Networks VNS3 Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Cohesive Networks VNS3. Authentication is required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 8000 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24178.

In the web ui of the openbuildservice before 2.3.0 a code injection of the project rebuildtimes statistics could be used by authorized attackers to execute shellcode.

A vulnerability, which was classified as critical, was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. This affects the function setdeviceName of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument deviceMac/deviceName leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272595. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Logsign Unified SecOps Platform Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Logsign Unified SecOps Platform. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the implementation of the HTTP API. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24168.

Logsign Unified SecOps Platform Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Logsign Unified SecOps Platform. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the implementation of the HTTP API. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24167.

Logsign Unified SecOps Platform Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Logsign Unified SecOps Platform. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the implementation of the HTTP API. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24165.

RaspAP raspap-webgui versions prior to 3.3.6 contain an OS command injection vulnerability. If exploited, an arbitrary OS command may be executed by a user who can log in to the product.

TP-Link WDR Series devices through firmware v3 (such as TL-WDR5620 V3.0) are affected by command injection (after login) leading to remote code execution, because shell metacharacters can be included in the weather get_weather_observe citycode field.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Interface field to SetStaticRouteSettings.

In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

D-Link D-View executeWmicCmd Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link D-View. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the executeWmicCmd method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21821.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the LoginPassword field to Login.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Username field to Login.

Open WebUI PIP install_frontmatter_requirements Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Open WebUI. Authentication is required to exploit this vulnerability. The specific flaw exists within the install_frontmatter_requirements function.The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-28258.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MaxIdTime field to SetWanSettings.

The ZyXEL P660HN-T1A v2 TCLinux Fw #7.3.37.6 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is only accessible by an authenticated user. The vulnerability is in the logSet.asp page and can be exploited through the ServerIP parameter. Authentication can be achieved by exploiting CVE-2017-18371.

FusionPBX 4.4.8 allows an attacker to execute arbitrary system commands by submitting a malicious command to the service_edit.php file (which will insert the malicious command into the database). To trigger the command, one needs to call the services.php file via a GET request with the service id followed by the parameter a=start to execute the stored command.

EyesOfNetwork 5.1 allows Remote Command Execution via shell metacharacters in the module/tool_all/ host field.

On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable.

In OrangeHRM 4.3.1 and before, there is an input validation error within admin/listMailConfiguration (txtSendmailPath parameter) that allows authenticated attackers to achieve arbitrary command execution.

The traceroute function on the TP-Link TL-WR840N v4 router with firmware through 0.9.1 3.16 is vulnerable to remote code execution via a crafted payload in an IP address input field.

An issue was discovered on D-Link DIR-823G devices with firmware 1.02B03. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the IPAddress or Gateway field to SetStaticRouteSettings.

lib/Controller/ExtractionController.php in the Extract add-on before 1.2.0 for Nextcloud allows Remote Code Execution via shell metacharacters in a RAR filename via ajax/extractRar.php (nameOfFile and directory parameters).

On D-Link DCS-5009 devices with firmware 1.08.11 and earlier, DCS-5010 devices with firmware 1.14.09 and earlier, and DCS-5020L devices with firmware before 1.15.01, command injection in alphapd (binary responsible for running the camera's web server) allows remote authenticated attackers to execute code through sanitized /setSystemAdmin user input in the AdminID field being passed directly to a call to system.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the IP Address in Add Gaming Rule.

In Loopchain through 2.2.1.3, an attacker can escalate privileges from a low-privilege shell by changing the environment (aka injection in the DEFAULT_SCORE_HOST environment variable).

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the TCP Ports To Open in Add Gaming Rule.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the key passwd in Routing RIP Settings.

Centreon 18.x before 18.10.6, 19.x before 19.04.3, and Centreon web before 2.8.29 allows the attacker to execute arbitrary system commands by using the value "init_script"-"Monitoring Engine Binary" in main.get.php to insert a arbitrary command into the database, and execute it by calling the vulnerable page www/include/configuration/configGenerate/xml/generateFiles.php (which passes the inserted value to the database to shell_exec without sanitizing it, allowing one to execute system arbitrary commands).

A command injection vulnerability in UploadHandler.php in Vesta Control Panel 0.9.8-24 allows remote attackers to escalate from regular registered users to root.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the IP Address in Add Virtual Server.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the Private Port in Add Virtual Server.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication). The command injection exists in the key ip_addr.

The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by several post-authentication command injection vulnerabilities.