A stack-based buffer overflow vulnerability in Opto 22 PAC Control Basic and PAC Control Professional versions R10.0a and prior may allow remote code execution.

There are no requirements for setting a complex password in the built-in web server of the SNAP PAC S1 Firmware version R10.3b, which could allow for a successful brute force attack if users don't set up complex credentials.

Opto 22 SoftPAC Project Version 9.6 and prior. SoftPAC communication does not include any credentials. This allows an attacker with network access to directly communicate with SoftPAC, including, for example, stopping the service remotely.

The telnet server for 3Com hardware such as PS40 SuperStack II does not delay or disconnect remote attackers who provide an incorrect username or password, which makes it easier to break into the server via brute force password guessing.

VAXstations running Open VMS 5.3 through 5.5-2 with VMS DECwindows or MOTIF do not properly disable access to user accounts that exceed the break-in limit threshold for failed login attempts, which makes it easier for attackers to conduct brute force password guessing.

tiki-login.php in Tiki before 21.2 sets the admin password to a blank value after 50 invalid login attempts.

The DIGITS: WordPress Mobile Number Signup and Login WordPress plugin before 8.4.6.1 does not rate limit OTP validation attempts, making it straightforward for attackers to bruteforce them.

Improper Restriction of Excessive Authentication Attempts vulnerability in Drupal Mail Login allows Brute Force.This issue affects Mail Login: from 3.0.0 before 3.2.0, from 4.0.0 before 4.2.0.

A flaw was found in Red Hat Process Automation Manager 7 where an attacker can benefit from a brute force attack against Administration Console as the application does not limit the number of unsuccessful login attempts.

Server-Side Request Forgery (SSRF), Improperly Controlled Modification of Dynamically-Determined Object Attributes, Improper Restriction of Excessive Authentication Attempts vulnerability in YugaByte, Inc. Yugabyte Managed allows Accessing Functionality Not Properly Constrained by ACLs, Communication Channel Manipulation, Authentication Abuse.This issue affects Yugabyte Managed: from 2.0.0.0 through 2.13.0.0

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have has no account lockout policy configured for the login page of the product. This may allow an attacker to execute a brute-force password attack with no time limitation and without harming the normal operation of the user. This could allow an attacker to gain valid credentials for the product interface.

CasaOS-UserService provides user management functionalities to CasaOS. Starting in version 0.4.4.3 and prior to version 0.4.7, CasaOS doesn't defend against password brute force attacks, which leads to having full access to the server. The web application lacks control over the login attempts. This vulnerability allows attackers to get super user-level access over the server. Version 0.4.7 contains a patch for this issue.

An improper restriction of excessive authentication attempts [CWE-307] in FortiClientEMS version 7.2.0 through 7.2.4 and before 7.0.10 allows an unauthenticated attacker to try a brute force attack against the FortiClientEMS console via crafted HTTP or HTTPS requests.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Prior to versions 2.8.13, 2.9.9, and 2.10.4, an attacker can exploit a chain of vulnerabilities, including a Denial of Service (DoS) flaw and in-memory data storage weakness, to effectively bypass the application's brute force login protection. This is a critical security vulnerability that allows attackers to bypass the brute force login protection mechanism. Not only can they crash the service affecting all users, but they can also make unlimited login attempts, increasing the risk of account compromise. Versions 2.8.13, 2.9.9, and 2.10.4 contain a patch for this issue.

Dell RecoverPoint for Virtual Machines 5.3.x, 6.0.SP1 contains a brute force/dictionary attack vulnerability. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to launch a brute force attack or a dictionary attack against the RecoverPoint login form. This allows attackers to brute-force the password of valid users in an automated manner.

CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could cause account takeover and unauthorized access to the system when an attacker conducts brute-force attacks against the login form.

Due to insufficient server-side login-attempt limit enforcement, a vulnerability in /account/login in Huntflow Enterprise before 3.10.14 could allow an unauthenticated, remote user to perform multiple login attempts for brute-force password guessing.

DECISO OPNsense 23.1 does not impose rate limits for authentication, allowing attackers to perform a brute-force attack to bypass authentication.

RAGFlow through 0.18.1 allows account takeover because it is possible to conduct successful brute-force attacks against email verification codes to perform arbitrary account registration, login, and password reset. Codes are six digits and there is no rate limiting.

A vulnerability was found in Thecosy IceCMS 2.0.1. It has been classified as problematic. Affected is an unknown function of the file /login of the component Captcha Handler. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-247884.

Lack of protection against brute force attacks in M-Files Server before 23.12.13205.0 allows an attacker unlimited authentication attempts, potentially compromising targeted M-Files user accounts by guessing passwords.

EuroTel ETL3100 versions v01c01 and v01x37 does not limit the number of attempts to guess administrative credentials in remote password attacks to gain full control of the system.

The Theme My Login 2FA WordPress plugin before 1.2 does not rate limit 2FA validation attempts, which may allow an attacker to brute-force all possibilities, which shouldn't be too long, as the 2FA codes are 6 digits.

Sielco PolyEco1000 uses a weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

DoraCMS v2.1.8 was discovered to re-use the same code for verification of valid usernames and passwords. This vulnerability allows attackers to gain access to the application via a bruteforce attack.

Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server prior to versions 26.0.9 and 27.1.4; as well as Nextcloud Enterprise Server prior to versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4; when a (reverse) proxy is configured as trusted proxy the server could be tricked into reading a wrong remote address for an attacker, allowing them executing authentication attempts than intended. Nextcloud Server versions 26.0.9 and 27.1.4 and Nextcloud Enterprise Server versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4 contain a patch for this issue. No known workarounds are available.

Gestsup before 3.2.10 allows account takeover through the password recovery functionality (remote). The affected component is the file forgot_pwd.php - it uses a weak algorithm for the generation of password recovery tokens (the PHP uniqueid function), allowing a brute force attack.

kodbox 1.46.01 has a security flaw that enables user enumeration. This problem is present on the login page, where an attacker can identify valid users based on varying response messages, potentially paving the way for a brute force attack.

Agentflow from Flowring Technology has an Account Lockout Bypass vulnerability, allowing unauthenticated remote attackers to exploit this vulnerability to perform password brute force attack.

Improper Restriction of Excessive Authentication Attempts in GitHub repository linagora/twake prior to 0.0.0.

OpenClinic GA versions 5.09.02 and 5.89.05b contain an authentication mechanism within the system that does not provide sufficient complexity to protect against brute force attacks, which may allow unauthorized users to access the system after no more than a fixed maximum number of attempts.

OX App Suite 7.10.1 to 7.10.3 has improper input validation for rate limits with a crafted User-Agent header, spoofed vacation notices, and /apps/load memory consumption.

EyesOfNetwork 5.3-10 uses an integer of between 8 and 10 digits for the session ID, which might be leveraged for brute-force authentication bypass (such as in CVE-2021-27513 exploitation).

Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of insufficient measures to prevent multiple failed authentication attempts. An unauthenticated remote attacker can execute a crafted Javascript to expose captcha in page, making it very easy for bots to bypass the captcha check and more susceptible to brute force attacks.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

A lack of rate limiting in the login page of Safe App version a3.0.9 allows attackers to bypass authentication via a brute force attack.

Beck IPC GmbH IPC@CHIP telnet service does not delay or disconnect users from the service when bad passwords are entered, which makes it easier for remote attackers to conduct brute force password guessing attacks.

Nextcloud server before 19.0.11, 20.0.10, 21.0.2 is vulnerable to brute force attacks due to lack of inclusion of IPv6 subnets in rate-limiting considerations. This could potentially result in an attacker bypassing rate-limit controls such as the Nextcloud brute-force protection.

In Sorcery before 0.15.0, there is a brute force vulnerability when using password authentication via Sorcery. The brute force protection submodule will prevent a brute force attack for the defined lockout period, but once expired, protection will not be re-enabled until a user or malicious actor logs in successfully. This does not affect users that do not use the built-in brute force protection submodule, nor users that use permanent account lockout. This has been patched in 0.15.0.

Insufficiently Protected Credentials vulnerability exists in homeLYnk (Wiser For KNX) and spaceLYnk V2.60 and prior that could cause unauthorized access of when credentials are discovered after a brute force attack.

Windows IIS Server Elevation of Privilege Vulnerability

The Phonemes mode in Pwgen 2.06 generates predictable passwords, which makes it easier for context-dependent attackers to guess the password via a brute-force attack.

An improper restriction of excessive authentication attempts vulnerability [CWE-307] in FortiTester Telnet port 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an unauthenticated attacker to guess the credentials of an admin user via a brute force attack.

Improper Restriction of Excessive Authentication Attempts in GitHub repository kareadita/kavita prior to 0.6.0.3.

In Eclipse GlassFish version 7.0.16 or earlier it is possible to perform Login Brute Force attacks as there is no limitation in the number of failed login attempts.

BookWyrm is a social network for tracking reading. Versions prior to 0.4.5 were found to lack rate limiting on authentication views which allows brute-force attacks. This issue has been patched in version 0.4.5. Admins with existing instances will need to update their `nginx.conf` file that was created when the instance was set up. Users are advised advised to upgrade. Users unable to upgrade may update their nginx.conf files with the changes manually.

SpliceCom Maximiser Soft PBX v1.5 and before does not restrict excessive authentication attempts, allowing attackers to bypass authentication via a brute force attack.

user_oidc app is an OpenID Connect user backend for Nextcloud. Authentication can be broken/bypassed in user_oidc app. It is recommended that the Nextcloud user_oidc app is upgraded to 1.3.2

Zammad 5.2.0 is vulnerable to privilege escalation. Zammad has a prevention against brute-force attacks trying to guess login credentials. After a configurable amount of attempts, users are invalidated and logins prevented. An attacker might work around this prevention, enabling them to send more than the configured amount of requests before the user invalidation takes place.

The htdocs/index.php?mainmenu=home login page in Dolibarr 10.0.6 allows an unlimited rate of failed authentication attempts.