A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been classified as critical. This affects the function sprintf of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_mount leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability classified as critical has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_FMT_R12R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_source_dev leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been declared as critical. This vulnerability affects the function cgi_FMT_R5_SpareDsk_DiskMGR of the file /cgi-bin/hd_config.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_source_dev leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been declared as critical. This vulnerability affects the function cgi_FMT_Std2R1_DiskMGR of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_newly_dev leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this vulnerability is the function cgi_s3 of the file /cgi-bin/s3.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_a_key leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability classified as critical was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This vulnerability affects the function cgi_unzip of the file /cgi-bin/webfile_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument path leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

D-Link DIR_878_FW1.30B08 was discovered to contain a command injection vulnerability via the component /setnetworksettings/IPAddress. This vulnerability allows attackers to escalate privileges to root via a crafted payload.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DIR-600 up to 2.18. It has been rated as critical. This issue affects the function soapcgi_main of the file /soap.cgi. The manipulation of the argument service leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-273329 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A vulnerability, which was classified as critical, has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This issue affects the function cgi_add_zip of the file /cgi-bin/webfile_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument path leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

An issue was discovered in D-Link DIR-806 devices. There is a command injection in function hnap_main, which calls system() without checking the parameter that can be controlled by user, and finally allows remote attackers to execute arbitrary shell commands with a special HTTP header.

D-Link DIR-2150 GetDeviceSettings Target Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2150 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SOAP API interface, which listens on TCP port 80 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21235.

D-Link D-View executeWmicCmd Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link D-View. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the executeWmicCmd method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21821.

D-Link G416 flupl self Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21294.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via a urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because HTTP_ST is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

D-Link DIR_823G 1.0.2B05 was discovered to contain a command injection vulnerability via the HostName parameter in the SetWanSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This issue affects some unknown processing of the file /useratte/resmanage.php. The manipulation of the argument load leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-264533 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the IPAddress parameter in the SetGuestZoneRouterSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain multiple command injection vulnerabilities via the ExternalPort, InternalPort, ProtocolNumber, and LocalIPAddress parameters in the SetVirtualServerSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the VLANID:0/VID parameter in the SetVLANSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the VLANID:2/VID parameter in the SetVLANSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the key parameter in the SetWLanRadioSecurity function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the MacAddress parameter in the SetMACFilters2 function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the wl(0).(0)_ssid parameter. This vulnerability is exploited via a crafted POST request.

D-Link DI-7003GV2 v24.04.18D1, DI-7100G+V2 v24.04.18D1, DI-7100GV2 v24.04.18D1, DI-7200GV2 v24.04.18E1, DI-7300G+V2 v24.04.18D1, and DI-7400G+V2 v24.04.18D1 are vulnerable to Remote Command Execution. An attacker can achieve arbitrary command execution by sending a carefully crafted malicious string to the CGI function responsible for handling usb_paswd.asp.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via keys smartqos_express_devices and smartqos_normal_devices in SetSmartQoSSettings.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the tomography_ping_address parameter in /HNAP1/ interface.

This vulnerability allows network-adjacent attackers to execute arbitrary commands on affected installations of D-Link DIR-2150 4.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the xupnpd_generic.lua plugin for the xupnpd service, which listens on TCP port 4044 by default. When parsing the feed parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-15906.

D-Link DIR-823X firmware - 240126 was discovered to contain a remote command execution (RCE) vulnerability via the dhcpd_startip parameter at /goform/set_lan_settings.

On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, OS command injection is possible as a result of incorrect processing of the res_buf parameter to index.cgi.

diag_ping.cmd on D-Link DSL-2640U devices with firmware IM_1.00 and ME_1.00, and DSL-2540U devices with firmware ME_1.00, allows authenticated remote attackers to execute arbitrary OS commands via shell metacharacters in the ipaddr field of an HTTP GET request.

OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been classified as critical. This affects the function webdav_mgr of the file /cgi-bin/webdav_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_path leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the VLANID:1/VID parameter in the SetVLANSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR-816 A2_v1.10CNB04.img is vulnerable to Command Injection via /goform/SystemCommand. After the user passes in the command parameter, it will be spliced into byte_4836B0 by snprintf, and finally doSystem(&byte_4836B0); will be executed, resulting in a command injection.

In D-Link DIR-816 A2_v1.10CNB04, DIR-878 DIR_878_FW1.30B08.img a command injection vulnerability occurs in /goform/Diagnosis, after the condition is met, setnum will be spliced into v10 by snprintf, and the system will be executed, resulting in a command injection vulnerability

D-Link GO-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 is vulnerable to Command Injection via /cgibin, hnap_main,

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Command Injection via cgibin, ssdpcgi_main.

D-Link DIR_823G 1.0.2B05 was discovered to contain a command injection vulnerability via the Address parameter in the SetNetworkTomographySettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

D-Link DI-8200 16.07.26A1 is vulnerable to remote command execution in the msp_info_htm function via the flag parameter and cmd parameter.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the SubnetMask parameter in the SetGuestZoneRouterSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the SSID parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain multiple command injection vulnerabilities via the LocalIPAddress, TCPPorts, and UDPPorts parameters in the SetPortForwardingSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

The runShellCmd function in systemCheck.htm in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) "Ping or Trace an IP Address" or (2) "Perform a DNS Lookup" section.

Certain models of D-Link wireless routers do not properly validate user input in the telnet service, allowing unauthenticated remote attackers to use hard-coded credentials to log into telnet and inject arbitrary OS commands, which can then be executed on the device.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

prog.cgi on D-Link DIR-3060 devices before 1.11b04 HF2 allows remote authenticated users to inject arbitrary commands in an admin or root context because SetVirtualServerSettings calls CheckArpTables, which calls popen unsafely.

D-link DIR-816 A2 v1.10 is affected by a remote code injection vulnerability. An HTTP request parameter can be used in command string construction in the handler function of the /goform/dir_setWanWifi, which can lead to command injection via shell metacharacters in the statuscheckpppoeuser parameter.