netis-systems MEX605 v2.00.06 allows attackers to execute arbitrary OS commands via a crafted payload to the tracert page.

Netis WF2780 2.3.40404 and WF2411 1.1.29629 devices allow Shell Metacharacter Injection into the ping command, leading to remote code execution.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the Hostname parameter within the WAN settings. This vulnerability is exploited via a crafted payload.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the wakeup_mac parameter in the Wake-On-LAN (WoL) function. This vulnerability is exploited via a crafted payload.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the pin_host parameter in the WPS Settings.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the ddnsDomainName parameter in the Dynamic DNS settings.

An issue in NETIS SYSTEMS WF2409Ev4 v.1.0.1.705 allows a remote attacker to execute arbitrary code and obtain sensitive information via the password parameter in the /etc/shadow.sample component.

There is an unauthorized access vulnerability in Netis 360RAC1200 v1.3.4517, which allows attackers to obtain sensitive information of the device without authentication, obtain user tokens, and ultimately log in to the device backend management.

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the wps_ap_ssid5g parameter

NETIS SYSTEMS MW5360 V1.0.1.3031 was discovered to contain a command injection vulnerability via the password parameter on the login page.

A vulnerability classified as critical has been found in Netis Netcore Router. This affects an unknown part. The manipulation leads to use of hard-coded password. It is possible to initiate the attack remotely. The identifier VDB-217593 was assigned to this vulnerability.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability in the Changing Username and Password function. This vulnerability is exploited via a crafted payload.

netis-systems MEX605 v2.00.06 allows attackers to execute arbitrary OS commands via a crafted payload to the ping test page.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability in the diagnostic tools page. This vulnerability is exploited via a crafted HTTP request.

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the config_sequence parameter in other_para of cgitest.cgi.

Netis WF2419 is vulnerable to authenticated Remote Code Execution (RCE) as root through the router Web management page. The vulnerability has been found in firmware version V1.2.31805 and V2.2.36123. After one is connected to this page, it is possible to execute system commands as root through the tracert diagnostic tool because of lack of user input sanitizing.

Netis WF2471 v1.2.30142 devices allow an authenticated attacker to execute arbitrary OS commands via shell metacharacters in the /cgi-bin-igd/sys_log_clean.cgi log_3g_type parameter.

An OS Command Injection vulnerability was found in /landrecordsys/admin/dashboard.php in PHPGurukul Land Record System v1.0, which allows remote attackers to execute arbitrary code via the "Cookie" GET request parameter.

DLINK DIR-825 REVB 2.03 devices have an OS command injection vulnerability in the CGl interface apc_client_pin.cgi, which allows remote attackers to execute arbitrary commands via the parameter "wps_pin" passed to the apc_client_pin.cgi binary through a POST request.

Telesquare SDT-CW3B1 1.1.0 is affected by an OS command injection vulnerability that allows a remote attacker to execute OS commands without any authentication.

The web services of Softnext's products, Mail SQR Expert and Mail Archiving Expert do not properly validate user input, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the remote server.

tinyfiledialogs (aka tiny file dialogs) before 3.15.0 allows shell metacharacters (such as a backquote or a dollar sign) in titles, messages, and other input data. NOTE: this issue exists because of an incomplete fix for CVE-2020-36767, which only considered single and double quote characters.

totolink a3100r V5.9c.4577 is vulnerable to os command injection. The backend of a page is executing the "ping" command, and the input field does not adequately filter special symbols. This can lead to command injection attacks.

A Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetNetworkTomographySettings.php of D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin because backticks can be used for command injection when judging whether it is a reasonable domain name.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetNetCheckTools. This vulnerability allows attackers to execute arbitrary commands via the hostName parameter.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetUSBShareInfo. This vulnerability allows attackers to execute arbitrary commands via the usbOrdinaryUserName parameter.

Accellion File Transfer Appliance version FTA_8_0_540 suffers from an instance of CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection').

CyberPanel (aka Cyber Panel) before 2.3.5 allows Command Injection via completePath in the ProcessUtilities.outputExecutioner() sink. There is /filemanager/upload (aka File Manager upload) unauthenticated remote code execution via shell metacharacters.

getresetstatus in dns/views.py and ftp/views.py in CyberPanel (aka Cyber Panel) before 1c0c6cb allows remote attackers to bypass authentication and execute arbitrary commands via /dns/getresetstatus or /ftp/getresetstatus by bypassing secMiddleware (which is only for a POST request) and using shell metacharacters in the statusfile property, as exploited in the wild in October 2024 by PSAUX. Versions through 2.3.6 and (unpatched) 2.3.7 are affected.

An OS command injection vulnerability in Hardy Barth cPH2 eCharge Ladestation v1.87.0 and earlier, may allow an unauthenticated remote attacker to execute arbitrary commands on the system via a specifically crafted arguments passed to the connectivity check feature.

ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request.

IBM Security Verify Access Appliance 10.0.0 through 10.0.8 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

A CWE-306 "Missing Authentication for Critical Function" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point and malicious commands are executed with root privileges. No authentication is enabled on the service and the source of the vulnerability resides in processing code associated to the "capture_packages" operation.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Command execution.

An Improper Neutralization of Special Elements (in an OS command) issue was discovered in Geutebruck IP Camera G-Cam/EFD-2250 Version 1.11.0.12. An improper neutralization of special elements vulnerability has been identified. If special elements are not properly neutralized, an attacker can call multiple parameters that can allow access to the root level operating system which could allow remote code execution.

mySCADA myPRO: Versions 8.20.0 and prior has a feature where the firmware can be updated, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

An issue in ZIONCOM (Hong Kong) Technology Limited A7000R v.4.1cu.4154 allows an attacker to execute arbitrary code via the cig-bin/cstecgi.cgi to the settings/setPasswordCfg function.

In WhatsUp Gold versions released before 2023.1.3, a Remote Code Execution issue exists in Progress WhatsUp Gold. This vulnerability allows an unauthenticated attacker to achieve the RCE as a service account through NmApi.exe.

In Visual Tools DVR VX16 4.2.28.0, an unauthenticated attacker can achieve remote command execution via shell metacharacters in the cgi-bin/slogin/login.py User-Agent HTTP header.

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. Multiple functions in the bpserverd daemon were vulnerable to arbitrary remote code execution as root. The vulnerability was caused by untrusted input (received by the server) being passed to system calls.

TP-Link Archer A7 Archer A7(US)_V5_210519 is affected by a command injection vulnerability in /usr/bin/tddp. The vulnerability is caused by the program taking part of the received data packet as part of the command. This will cause an attacker to execute arbitrary commands on the router.

A vulnerability was found in Brave UX for-the-badge and classified as critical. Affected by this issue is some unknown functionality of the file .github/workflows/combine-prs.yml. The manipulation leads to os command injection. The name of the patch is 55b5a234c0fab935df5fb08365bc8fe9c37cf46b. It is recommended to apply a patch to fix this issue. VDB-216842 is the identifier assigned to this vulnerability.

smalruby-editor v0.4.0 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

TOTOLINK EX1200T V4.1.2cu.5215 is affected by a command injection vulnerability that can remotely execute arbitrary code.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceMac of the file global.so which can control deviceName to attack.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function NTPSyncWithHost of the file system.so which can control hostTime to attack.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceName of the file global.so which can control thedeviceName to attack.

The ZyXEL P660HN-T1A v1 TCLinux Fw $7.3.15.0 v001 / 3.40(ULM.0)b31 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is accessible by an unauthenticated user. The vulnerability is in the ViewLog.asp page and can be exploited through the remote_host parameter.

A remote command execution (RCE) vulnerability was found in FeMiner wms V1.0 in /wms/src/system/datarec.php. The $_POST[r_name] is directly passed into the $mysqlstr and is executed by exec.