The Micro Air Vehicle Link (MAVLink) protocol presents authentication mechanisms on its version 2.0 however according to its documentation, in order to maintain backwards compatibility, GCS and autopilot negotiate the version via the AUTOPILOT_VERSION message. Since this negotiation depends on the answer, an attacker may craft packages in a way that hints the autopilot to adopt version 1.0 of MAVLink for the communication. Given the lack of authentication capabilities in such version of MAVLink (refer to CVE-2020-10282), attackers may use this method to bypass authentication capabilities and interact with the autopilot directly.

The Micro Air Vehicle Link (MAVLink) protocol presents no authentication mechanism on its version 1.0 (nor authorization) whichs leads to a variety of attacks including identity spoofing, unauthorized access, PITM attacks and more. According to literature, version 2.0 optionally allows for package signing which mitigates this flaw. Another source mentions that MAVLink 2.0 only provides a simple authentication system based on HMAC. This implies that the flying system overall should add the same symmetric key into all devices of network. If not the case, this may cause a security issue, that if one of the devices and its symmetric key are compromised, the whole authentication system is not reliable.

PX4 autopilot is a flight control solution for drones. In affected versions a global buffer overflow vulnerability exists in the CrsfParser_TryParseCrsfPacket function in /src/drivers/rc/crsf_rc/CrsfParser.cpp:298 due to the invalid size check. A malicious user may create an RC packet remotely and that packet goes into the device where the _rcs_buf reads. The global buffer overflow vulnerability will be triggered and the drone can behave unexpectedly. This issue has been addressed in version 1.14.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Buffer Overflow vulnerability in PX4-Autopilot allows attackers to cause a denial of service via handler function handling msgid 332.

Stack Buffer Overflow in PX4-Autopilot v1.14.3, which allows attackers to execute commands to exploit this vulnerability and cause the program to refuse to execute

A buffer overflow in PX4-Autopilot v1.12.3 allows attackers to cause a Denial of Service (DoS) via a crafted MavLink message.

PX4-Autopilot v1.14.3 was discovered to contain a buffer overflow via the topic_name parameter at /logger/logged_topics.cpp.

An issue in PX4 Autopilot v1.14 and before allows a remote attacker to execute arbitrary code and cause a denial of service via the Breach Return Point function.

In cd_CodeMsg of cd_codec.c, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-250100597References: N/A

In SDP_AddAttribute of sdp_db.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-261867748

Buffer overflow in system firmware for EDK II may allow unauthenticated user to potentially enable escalation of privilege and/or denial of service via network access.

In ixheaacd_adts_crc_start_reg of ixheaacd_adts_crc_check.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android-9. Android ID: A-113261928.

In CDMA PPP protocol, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privilege needed. User interaction is not needed for exploitation. Patch ID: MOLY01068234; Issue ID: ALPS08010003.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client. An attacker who successfully exploited the vulnerability could run arbitrary code on the client machine. To exploit the vulnerability, an attacker could send specially crafted DHCP responses to a client. The security update addresses the vulnerability by correcting how Windows DHCP clients handle certain DHCP responses.

In impeg2d_mc_fullx_fully of impeg2d_mc.c there is a possible out of bound write due to missing bounds check. This could lead to remote arbitrary code execution with no additional execution privileges needed. User interaction is needed for exploitation.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka "Microsoft Exchange Memory Corruption Vulnerability." This affects Microsoft Exchange Server.

In gatt_end_operation of gatt_utils.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

In the deserialization constructor of NanoAppFilter.java, there is a possible loss of data due to type confusion. This could lead to local escalation of privilege in the system server with no additional execution privileges needed. User interaction is not needed for exploitation.

The VMware vCenter Server contains a memory corruption vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger a memory corruption vulnerability which may bypass authentication.

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Improper access control settings in ASP Bootloader may allow an attacker to corrupt the return address causing a stack-based buffer overrun potentially leading to arbitrary code execution.

A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. Within `DecodeTreeBlock` which is called during the decompression of an XMI file, a UINT32 is loaded from the file and used as trusted input as the length of a buffer. An attacker can provide a malicious file to trigger this vulnerability.

A malicious DNS response can trigger a number of OOB reads, writes, and other memory issues

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress_segment() that results in a memory corruption and probably even a remote code execution.

In lcsm_SendRrAcquiAssist of lcsm_bcm_assist.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-246169606References: N/A

rdesktop versions up to and including v1.8.3 contain a Heap-Based Buffer Overflow in function process_plane() that results in a memory corruption and probably even a remote code execution.

In ProfSixDecomTcpSACKoption of RohcPacketCommon, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-244450646References: N/A

In prop2cfg of btif_storage.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

rdesktop versions up to and including v1.8.3 contain a Heap-Based Buffer Overflow in function ui_clip_handle_data() that results in a memory corruption and probably even a remote code execution.

The VMware vCenter Server contains an out-of-bounds write vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger an out-of-bound write by sending a specially crafted packet leading to memory corruption.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

All versions of GurumDDS are vulnerable to heap-based buffer overflow, which may cause a denial-of-service condition or remotely execute arbitrary code.

Eaton 9000X DriveA versions 2.0.29 and prior has a stack-based buffer overflow vulnerability, which may allow remote code execution.

Stack-based buffer overflow in Asuswrt-Merlin firmware for ASUS devices older than 384.4 and ASUS firmware before 3.0.0.4.382.50470 for devices allows remote attackers to execute arbitrary code by providing a long string to the blocking.asp page via a GET or POST request. Vulnerable parameters are flag, mac, and cat_id.

A certain sequence of valid BGP or IPv6 BFD packets may trigger a stack based buffer overflow in the Junos OS Packet Forwarding Engine manager (FXPC) process on QFX5000 series, EX4300, EX4600 devices. This issue can result in a crash of the fxpc daemon or may potentially lead to remote code execution. Affected releases are Juniper Networks Junos OS on QFX 5000 series, EX4300, EX4600 are: 14.1X53; 15.1X53 versions prior to 15.1X53-D235; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3; 17.3 versions prior to 17.3R3-S2, 17.3R4; 17.4 versions prior to 17.4R2-S1, 17.4R3; 18.1 versions prior to 18.1R3-S1, 18.1R4; 18.2 versions prior to 18.2R2; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R2.

rdesktop versions up to and including v1.8.3 contain a Heap-Based Buffer Overflow in function cssp_read_tsrequest() that results in a memory corruption and probably even a remote code execution.

The vCenter Server contains a heap overflow vulnerability due to the usage of uninitialized memory in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may exploit heap-overflow vulnerability to execute arbitrary code on the underlying operating system that hosts vCenter Server.

In Advantech WebAccess versions V8.2_20170817 and prior, WebAccess versions V8.3.0 and prior, WebAccess Dashboard versions V.2.0.15 and prior, WebAccess Scada Node versions prior to 8.3.1, and WebAccess/NMS 2.0.3 and prior, a heap-based buffer overflow vulnerability has been identified, which may allow an attacker to execute arbitrary code.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 and later QTS 5.0.0: QVR Guard 2.1.3.0 and later

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress() that results in a memory corruption and probably even a remote code execution.

In store_upgrade and store_cmd of drivers/input/touchscreen/stm/ftm4_pdc.c, there are out of bound writes due to missing bounds checks or integer underflows. These could lead to escalation of privilege.

FreeRDP prior to version 2.0.0-rc4 contains an Integer Overflow that leads to a Heap-Based Buffer Overflow in function gdi_Bitmap_Decompress() and results in a memory corruption and probably even a remote code execution.

In Delta Electronics Automation TPEditor version 1.89 or prior, parsing a malformed program file may cause heap-based buffer overflow vulnerability, which may allow remote code execution.

FreeRDP prior to version 2.0.0-rc4 contains an Integer Truncation that leads to a Heap-Based Buffer Overflow in function update_read_bitmap_update() and results in a memory corruption and probably even a remote code execution.

In process_service_attr_req and process_service_search_attr_req of sdp_server.cc, there is an out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed.  User interaction is not needed for exploitation.

A buffer overflow vulnerability exists in the Microsoft SQL Server that could allow remote code execution on an affected system, aka "Microsoft SQL Server Remote Code Execution Vulnerability." This affects Microsoft SQL Server.