An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the Gateway key.

D-Link DIR-846 Firmware FW100A53DBR was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

A vulnerability was found in D-Link DCS-932L 2.18.01 and classified as critical. Affected by this issue is the function sub_404780 of the file /bin/gpio. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link COVR 1200,1202,1203 v1.08 was discovered to contain a command injection vulnerability via the system_time_timezone parameter at function SetNTPServerSettings.

D-Link COVR 1200,1202,1203 v1.08 was discovered to contain a command injection vulnerability via the /SetTriggerWPS/PIN parameter at function SetTriggerWPS.

D-Link COVR 1200,1203 v1.08 was discovered to contain a command injection vulnerability via the tomography_ping_number parameter at function SetNetworkTomographySettings.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. This affects the function SubUPnPCSInit of the file /sbin/udev. The manipulation of the argument CameraName leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Data Integrity Failure in 'Backup Config' in D-Link DNR-322L <= 2.60B15 allows an authenticated attacker to execute OS level commands on the device.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. This vulnerability affects the function isUCPCameraNameChanged of the file /sbin/ucp. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-816 A2_v1.10CNB04.img is vulnerable to Command Injection via /goform/SystemCommand. After the user passes in the command parameter, it will be spliced into byte_4836B0 by snprintf, and finally doSystem(&byte_4836B0); will be executed, resulting in a command injection.

D-Link DSL-3782 v1.03 and below was discovered to contain a command injection vulnerability via the function byte_4C0160.

D-Link DSL-3782 v1.03 and below was discovered to contain a stack overflow via the function getAttrValue.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been classified as critical. This affects the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DIR-600L up to 2.07B01. This vulnerability affects the function wake_on_lan. The manipulation of the argument host leads to command injection. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this issue is the function formSetWizard2. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been declared as critical. Affected by this vulnerability is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in D-Link DIR-619L 2.04B04. Affected is the function formSetEasy_Wizard. The manipulation of the argument curTime leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DIR-600L up to 2.07B01. This affects the function formLogin. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-600L up to 2.07B01. It has been classified as critical. Affected is the function formSetWAN_Wizard534. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-600L up to 2.07B01 and classified as critical. This issue affects the function formSetLog. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-600L up to 2.07B01. Affected by this issue is the function formEasySetupWizard3. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.04B04. It has been declared as critical. This vulnerability affects the function wake_on_lan. The manipulation of the argument mac leads to command injection. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formSetWAN_Wizard534. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been declared as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DIR-605L 2.13B01. Affected is the function wake_on_lan. The manipulation of the argument mac leads to command injection. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DIR-619L 2.04B04. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-600L up to 2.07B01. It has been rated as critical. Affected by this issue is the function formSetWanL2TP. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-816 A2V1.1.0B05 was found to contain a command injection in iptablesWebsFilterRun, which allows remote attackers to execute arbitrary commands via shell.

A vulnerability has been found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this vulnerability is the function formSetWAN_Wizard52. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-600L up to 2.07B01 and classified as critical. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DIR-600L up to 2.07B01. This affects the function formSysCmd. The manipulation of the argument host leads to command injection. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.04B04. It has been classified as critical. This affects the function formSysCmd. The manipulation of the argument sysCmd leads to command injection. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.04B04. This issue affects the function formEasySetupWizard3. The manipulation of the argument wan_connected leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetWAN_Wizard55. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-600L up to 2.07B01. It has been declared as critical. Affected by this vulnerability is the function formWlSiteSurvey. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DIR-890L and DIR-806A1 up to 100CNb11/108B03. Affected is the function sub_175C8 of the file /htdocs/soap.cgi. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02 and classified as critical. Affected by this issue is the function check_dws_cookie of the file /storage. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been rated as critical. This issue affects the function sub_454F2C. The manipulation of the argument sysCmd leads to command injection. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DIR-880L up to 104WWb01. Affected by this vulnerability is the function sub_16570 of the file /htdocs/ssdpcgi of the component Request Header Handler. The manipulation of the argument HTTP_ST/REMOTE_ADDR/REMOTE_PORT/SERVER_ID leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-615 2.5.17 devices allow Remote Code Execution via shell metacharacters in the Host field of the System / Traceroute screen.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.

A vulnerability has been found in D-Link DWR-M961 1.1.36 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formStaticDHCP of the component Authorization Interface. The manipulation of the argument Hostname leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.1.49 is able to address this issue. It is recommended to upgrade the affected component.

D-Link DIR-890L 1.20b01 allows attackers to execute arbitrary code due to the hardcoded option Wake-On-Lan for the parameter 'descriptor' at SetVirtualServerSettings.php

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the ntp_server parameter in an ntp_sync.cgi POST request.

D-Link DAP-1360U before 3.0.1 devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the IP JSON value for ping (aka res_config_action=3&res_config_id=18).