Tenda F1203 V2.0.1.6 was discovered to contain a buffer overflow via the entrys parameter at /goform/RouteStatic.

Tenda AC6V1.0 V15.03.05.19 was discovered to contain a buffer overflow via the startIp parameter in the formSetPPTPServer function.

A buffer overflow vulnerability in the AT command interface of Gigaset DX600A v41.00-175 devices allows remote attackers to force a device reboot by sending relatively long AT commands.

An issue was discovered in MBed OS 6.16.0. Its hci parsing software dynamically determines the length of certain hci packets by reading a byte from its header. This value is assumed to be greater than or equal to 3, but the software doesn't ensure that this is the case. Supplying a length less than 3 leads to a buffer overflow in a buffer that is allocated later. It is simultaneously possible to cause another integer overflow by supplying large length values because the provided length value is increased by a few bytes to account for additional information that is supposed to be stored there. This bug is trivial to exploit for a denial of service but is not certain to suffice to bring the system down and can generally not be exploited further because the exploitable buffer is dynamically allocated.

An issue was discovered in Tenda W20E V4.0br_V15.11.0.6. Attackers may exploit the vulnerability by specifying the value of `userInfo`. When `userInfo` is passed into the `addWewifiWhiteUser` function and processed by `sscanf` without size validation, it could lead to a buffer overflow vulnerability.

An issue was discovered in MBed OS 6.16.0. Its hci parsing software dynamically determines the length of certain hci packets by reading a byte from its header. Certain events cause a callback, the logic for which allocates a buffer (the length of which is determined by looking up the event type in a table). The subsequent write operation, however, copies the amount of data specified in the packet header, which may lead to a buffer overflow. This bug is trivial to exploit for a denial of service but is not certain to suffice to bring the system down and can generally not be exploited further because the exploitable buffer is dynamically allocated.

An issue was discovered in Tenda W20E V4.0br_V15.11.0.6. Failure to validate `pPortMapIndex` may lead to buffer overflows when using `strcpy`.

IOWOW is a C utility library and persistent key/value storage engine. Versions 1.4.15 and prior contain a stack buffer overflow vulnerability that allows for Denial of Service (DOS) when it parses scientific notation numbers present in JSON. A patch for this issue is available at commit a79d31e4cff1d5a08f665574b29fd885897a28fd in the `master` branch of the repository. There are no workarounds other than applying the patch.

Elspec Engineering G5 Digital Fault Recorder Firmware v1.2.1.12 was discovered to contain a buffer overflow.

IP-COM EW9 V15.11.0.14(9732) was discovered to contain a buffer overflow in the formSetDebugCfg function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted string.

Tenda AC1900 AP500(US)_V1_180320(Beta) was discovered to contain a buffer overflow in the 0x32384 function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda AC1200 US_AC6V2.0RTL_V15.03.06.51_multi_TDE01 was discovered to contain a buffer overflow in the 0x4a12cc function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda AC1200 US_AC6V2.0RTL_V15.03.06.51_multi_TDE01 was discovered to contain a buffer overflow in the 0x47de1c function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda AC1200 US_AC6V2.0RTL_V15.03.06.51_multi_TDE01 was discovered to contain a buffer overflow in the 0x475dc function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

XStream serializes Java objects to XML and back again. Versions prior to 1.4.20 may allow a remote attacker to terminate the application with a stack overflow error, resulting in a denial of service only via manipulation the processed input stream. The attack uses the hash code implementation for collections and maps to force recursive hash calculation causing a stack overflow. This issue is patched in version 1.4.20 which handles the stack overflow and raises an InputManipulationException instead. A potential workaround for users who only use HashMap or HashSet and whose XML refers these only as default map or set, is to change the default implementation of java.util.Map and java.util per the code example in the referenced advisory. However, this implies that your application does not care about the implementation of the map and all elements are comparable.

TOTOLINK A3002R TOTOLINK-A3002R-He-V1.1.1-B20200824.0128 is vulnerable Buffer Overflow via the hostname parameter in binary /bin/boa.

A vulnerability has been found in Tenda TX3 16.03.13.11_multi and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setPptpUserList. The manipulation of the argument list leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in Tenda TX3 16.03.13.11_multi. This affects an unknown part of the file /goform/setMacFilterCfg. The manipulation of the argument deviceList leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the extRadSrv2 parameter at cgiapp.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the profname parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sAct parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sPubKey parameter at dialin.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the trapcomm parameter at cgiswm.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sPeerId parameter at vpn.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sAppName parameter at sslapp.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the ssidencrypt%d parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the CGIbyFieldName parameter at chglog.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the pub_key parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

A buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed a malicious certificate or for an application to continue certificate verification despite failure to construct a path to a trusted issuer. An attacker can craft a malicious email address in a certificate to overflow an arbitrary number of bytes containing the `.' character (decimal 46) on the stack. This buffer overflow could result in a crash (causing a denial of service). In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the ssidencrypt_5g%d parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sProfileName parameter at usergrp.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sProfileName parameter at wizfw.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sPPPSrvNm parameter at fwuser.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the AControlIp1 parameter at acontrol.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the saveitem parameter at lan2lan.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sIpv6AiccuUser parameter at inetipv6.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sBPA_Pwd parameter at inet15.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the saveVPNProfile parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

A buffer overflow in modsecurity v3.0.12 allows attackers to cause a Denial of Service (DoS) via a crafted input inserted into the name parameter. NOTE: this is disputed by the Supplier because it cannot be reproduced. Also, the product's documentation indicates that it is not guaranteed to be usable with very large values of SecRequestBodyNoFilesLimit (which are required by the claimed issue).

D-Link Wireless AC1200 Dual Band VDSL ADSL Modem Router DSL-3782 Firmware v1.01 allows unauthenticated attackers to cause a Denial of Service (DoS) via the User parameter or Pwd parameter to Login.asp.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the iprofileidx parameter at dialin.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the pb parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the fid parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sSrvAddr parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sProfileName parameter at fextobj.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sDnsPro parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sStRtMskShow parameter at ipstrt.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sProfName parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sInRCSecret0 parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sProfileName parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.