An unauthorized user could access debug features in Quantum HD Unity products that were accidentally exposed.

Under certain circumstances the session token is not cleared on logout.

A vulnerability in versions 10.1 through 10.5 of Johnson Controls CEM Systems AC2000 allows a remote attacker to access to the system without adequate authorization. This issue affects: Johnson Controls CEM Systems AC2000 10.1; 10.2; 10.3; 10.4; 10.5.

Under certain configurations an unauthenticated remote user could be given access to credentials stored in the exacqVision Server.

An unauthorized user could gain account access to IQ Wifi 6 versions prior to 2.0.2 by conducting a brute force authentication attack.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows OS Command Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

Unauthenticated Remote Code Execution and Information Disclosure due to Local File Inclusion (LFI) vulnerability in Johnson Controls Frick Controls Quantum HD allow an unauthenticated attacker to execute arbitrary code on the affected device, leading to full system compromise. This issue affects Frick Controls Quantum HD: Frick Controls Quantum HD version 10.22 and prior.

Hardcoded Email Credentials Saved as Plaintext in Firmware (CWE-256: Plaintext Storage of a Password) vulnerability in Frick Controls Quantum HD version 10.22 and prior lead to unauthorized access, exposure of sensitive information, and potential misuse or system compromise This issue affects Frick Controls Quantum HD version 10.22 and prior.

Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

A vulnerability with the SmartService API Service option exists whereby an unauthorized user could potentially exploit this to upload malicious code to the server that could be executed at system level privileges. This affects Johnson Controls' Kantech EntraPass Corporate Edition versions 8.0 and prior; Kantech EntraPass Global Edition versions 8.0 and prior.

Unauthenticated Remote Code Execution i.e Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

An unauthenticated user could log into iSTAR Ultra, iSTAR Ultra LT, iSTAR Ultra G2, and iSTAR Edge G2 with administrator rights.

A debug feature in Sensormatic Electronics Illustra Pro Gen 4 Dome and PTZ cameras allows a user to compromise credentials after a long period of sustained attack.

All versions of iSTAR Ultra prior to version 6.8.9.CU01 are vulnerable to a command injection that could allow an unauthenticated user root access to the system.

Successful exploitation of this vulnerability could allow an unauthorized user to access sensitive data.

OpenBlue Enterprise Manager Data Collector versions prior to 3.2.5.75 may expose sensitive information to an unauthorized user under certain circumstances.

An attacker with physical access to the Kantech Gen1 ioSmart card reader with firmware version prior to 1.07.02 in certain circumstances can recover the reader's communication memory between the card and reader.

Johnson Controls Metasys 4.1 through 6.5, as used in Application and Data Server (ADS), Extended Application and Data Server (aka ADX), LonWorks Control Server 85 LCS8520, Network Automation Engine (NAE) 55xx-x, Network Integration Engine (NIE) 5xxx-x, and NxE8500, allows remote attackers to read password hashes via a POST request.

An issue was discovered in Meatmeet Android Mobile Application 1.1.2.0. An exported activity can be spawned with the mobile application which opens a hidden page. This page, which is not available through the normal flows of the application, contains several devices which can be added to your account, two of which have not been publicly released. As a result of this vulnerability, the attacker can gain insight into unreleased Meatmeet devices.

MILLENSYS Vision Tools Workspace 6.5.0.2585 exposes a sensitive configuration endpoint (/MILLENSYS/settings) that is accessible without authentication. This page leaks plaintext database credentials, file share paths, internal license server configuration, and software update parameters. An unauthenticated attacker can retrieve this information by accessing the endpoint directly, potentially leading to full system compromise. The vulnerability is due to missing access controls on a privileged administrative function.

A flaw in netfilter could allow a network-connected attacker to infer openvpn connection endpoint information for further use in traditional network attacks.

The CE21 Suite plugin for WordPress is vulnerable to sensitive information disclosure via the plugin-log.txt in versions up to, and including, 2.2.0. This makes it possible for unauthenticated attackers to log in the user associated with the JWT token.

The Syrus4 IoT gateway utilizes an unsecured MQTT server to download and execute arbitrary commands, allowing a remote unauthenticated attacker to execute code on any Syrus4 device connected to the cloud service. The MQTT server also leaks the location, video and diagnostic data from each connected device. An attacker who knows the IP address of the server is able to connect and perform the following operations: * Get location data of the vehicle the device is connected to * Send CAN bus messages via the ECU module ( https://syrus.digitalcomtech.com/docs/ecu-1 https://syrus.digitalcomtech.com/docs/ecu-1 ) * Immobilize the vehicle via the safe-immobilizer module ( https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization ) * Get live video through the connected video camera * Send audio messages to the driver ( https://syrus.digitalcomtech.com/docs/system-tools#apx-tts https://syrus.digitalcomtech.com/docs/system-tools#apx-tts )

Advantech R-SeeNet v2.4.23 allows an unauthenticated remote attacker to read from and write to the snmpmon.ini file, which contains sensitive information.

The Blackmagic ATEM Mini Pro 2.7 exposes sensitive device and stream configuration information via an unauthenticated Telnet service on port 9990. Upon connection, the attacker can access a protocol preamble that leaks the video mode, routing configuration, input/output labels, device model, and even internal identifiers such as the unique ID. This can be used for reconnaissance and planning further attacks.

Jizhicms v2.5 was discovered to contain an arbitrary file download vulnerability via the component /admin/c/PluginsController.php.

An exposure of sensitive information vulnerability has been reported to affect Media Streaming add-on. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following version: Media Streaming add-on 500.1.1.5 ( 2024/01/22 ) and later

An issue in NCR Terminal Handler v.1.5.1 allows a remote attacker to execute arbitrary code and obtain sensitive information via a crafted POST request to the UserService component

Label Studio is a multi-type data labeling and annotation tool with standardized output format. There is a vulnerability that can be chained within the ORM Leak vulnerability to impersonate any account on Label Studio. An attacker could exploit these vulnerabilities to escalate their privileges from a low privilege user to a Django Super Administrator user. The vulnerability was found to affect versions before `1.8.2`, where a patch was introduced.

There are vulnerabilities in the Soft AP Daemon Service which could allow a threat actor to execute an unauthenticated RCE attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.

A vulnerability in Veeam ONE allows an unauthenticated user to gain information about the SQL server connection Veeam ONE uses to access its configuration database. This may lead to remote code execution on the SQL server hosting the Veeam ONE configuration database.

NETGEAR RAX40 devices before 1.0.3.64 are affected by disclosure of administrative credentials.

The sensitive information of webcam device is not properly protected. Remote attackers can unauthentically grant administrator’s credential and further control the devices.

A vulnerability in the “plug-and-play” services component of Cisco Industrial Network Director (IND) could allow an unauthenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to improper access restrictions on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to access running configuration information about devices managed by the IND, including administrative credentials.

The Blackmagic Web Presenter HD firmware version 3.3 exposes sensitive information via an unauthenticated Telnet service on port 9977. When connected, the service reveals extensive device configuration data including: - Model, version, and unique identifiers - Network settings including IP, MAC, DNS - Current stream platform, stream key, and streaming URL - Audio/video configuration This data can be used to hijack live streams or perform network reconnaissance.

A critical unauthenticated remote code execution vulnerability was found all recent versions of Apache Tapestry. The affected versions include 5.4.5, 5.5.0, 5.6.2 and 5.7.0. The vulnerability I have found is a bypass of the fix for CVE-2019-0195. Recap: Before the fix of CVE-2019-0195 it was possible to download arbitrary class files from the classpath by providing a crafted asset file URL. An attacker was able to download the file `AppModule.class` by requesting the URL `http://localhost:8080/assets/something/services/AppModule.class` which contains a HMAC secret key. The fix for that bug was a blacklist filter that checks if the URL ends with `.class`, `.properties` or `.xml`. Bypass: Unfortunately, the blacklist solution can simply be bypassed by appending a `/` at the end of the URL: `http://localhost:8080/assets/something/services/AppModule.class/` The slash is stripped after the blacklist check and the file `AppModule.class` is loaded into the response. This class usually contains the HMAC secret key which is used to sign serialized Java objects. With the knowledge of that key an attacker can sign a Java gadget chain that leads to RCE (e.g. CommonsBeanUtils1 from ysoserial). Solution for this vulnerability: * For Apache Tapestry 5.4.0 to 5.6.1, upgrade to 5.6.2 or later. * For Apache Tapestry 5.7.0, upgrade to 5.7.1 or later.

AdRem NetCrunch 10.6.0.4587 has an Improper Session Handling vulnerability in the NetCrunch web client, which can lead to an authentication bypass or escalation of privileges.

Dell OpenManage Enterprise versions prior to 3.6.1 contain an improper authentication vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to hijack an elevated session or perform unauthorized actions by sending malformed data.

A flaw was discovered in FasterXML jackson-databind in all versions before 2.9.10 and 2.10.0, where it would permit polymorphic deserialization of malicious objects using the xalan JNDI gadget when used in conjunction with polymorphic type handling methods such as `enableDefaultTyping()` or when @JsonTypeInfo is using `Id.CLASS` or `Id.MINIMAL_CLASS` or in any other way which ObjectMapper.readValue might instantiate objects from unsafe sources. An attacker could use this flaw to execute arbitrary code.

A flaw was discovered in jackson-databind in versions before 2.9.10, 2.8.11.5 and 2.6.7.3, where it would permit polymorphic deserialization of a malicious object using commons-configuration 1 and 2 JNDI classes. An attacker could use this flaw to execute arbitrary code.

Input verification vulnerability in the AMS module. Successful exploitation of this vulnerability will cause unauthorized operations.

An issue was discovered on Thermo Fisher Ion Torrent OneTouch 2 INS1005527 devices. When they are powered on, an X11 display server is started. The display server listens on all network interfaces and is accessible over port 6000. The X11 access control list, by default, allows connections from 127.0.0.1 and 192.168.2.15. If a device is powered on and later connected to a network with DHCP, the device may not be assigned the 192.168.2.15 IP address, leaving the display server accessible by other devices on the network. The exposed X11 display server can then be used to gain root privileges and the ability to execute code remotely by interacting with matchbox-desktop and spawning a terminal. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Barco wePresent WiPG-1600W devices allow Authentication Bypass. Affected Version(s): 2.5.1.8. The Barco wePresent WiPG-1600W web interface does not use session cookies for tracking authenticated sessions. Instead, the web interface uses a "SEID" token that is appended to the end of URLs in GET requests. Thus the "SEID" would be exposed in web proxy logs and browser history. An attacker that is able to capture the "SEID" and originate requests from the same IP address (via a NAT device or web proxy) would be able to access the user interface of the device without having to know the credentials.

JunoClaw is an agentic AI platform built on Juno Network. Prior to 0.x.y-security-1, every MCP write tool (send_tokens, execute_contract, instantiate_contract, upload_wasm, ibc_transfer, etc.) accepted 'mnemonic: string' as an explicit tool-call parameter. The BIP-39 seed was consequently embedded in the LLM tool-call JSON, exposing it to any transport, log, or telemetry surface in the path between the LLM provider and the MCP process. This vulnerability is fixed in 0.x.y-security-1.

For ABB products ABB Ability™ System 800xA and related system extensions versions 5.1, 6.0 and 6.1, Compact HMI versions 5.1 and 6.0, Control Builder Safe 1.0, 1.1 and 2.0, Symphony Plus -S+ Operations 3.0 to 3.2 Symphony Plus -S+ Engineering 1.1 to 2.2, Composer Harmony 5.1, 6.0 and 6.1, Melody Composer 5.3, 6.1/6.2 and SPE for Melody 1.0SPx (Composer 6.3), Harmony OPC Server (HAOPC) Standalone 6.0, 6.1 and 7.0, ABB Ability™ System 800xA/ Advant® OCS Control Builder A 1.3 and 1.4, Advant® OCS AC100 OPC Server 5.1, 6.0 and 6.1, Composer CTK 6.1 and 6.2, AdvaBuild 3.7 SP1 and SP2, OPCServer for MOD 300 (non-800xA) 1.4, OPC Data Link 2.1 and 2.2, Knowledge Manager 8.0, 9.0 and 9.1, Manufacturing Operations Management 1812 and 1909, confidential data is written in an unprotected file. An attacker who successfully exploited this vulnerability could take full control of the computer.

OPEXUS eComplaint and eCASE before version 10.1.0.0 include the secret verification code in the HTTP response when requesting a password reset via 'ForcePasswordReset.aspx'. An attacker who knows an existing user's email address can reset the user's password and security questions. Existing security questions are not asked during the process.

EverShop is a TypeScript-first eCommerce platform. Versions prior to 2.1.1 have a vulnerability in the "Forgot Password" functionality. When specifying a target email address, the API response returns the password reset token. This allows an attacker to take over the associated account. Version 2.1.1 fixes the issue.

A vulnerability of remote credential disclosure was discovered in Advan VD-1 firmware versions up to 230. An attacker can export system configuration which is not encrypted to get the administrator’s account and password in plain text via cgibin/ExportSettings.cgi?Export=1 without any authentication.