A vulnerability was found in Linksys WRT54GL 4.30.18. It has been classified as problematic. This affects an unknown part of the file /wlaninfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. The identifier VDB-253329 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys WRT54GL 4.30.18 and classified as problematic. Affected by this issue is some unknown functionality of the file /SysInfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-253328. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Linksys SMART WiFi firmware on EA2700 and EA3500 devices; before 2.1.41 build 162351 on E4200v2 and EA4500 devices; before 1.1.41 build 162599 on EA6200 devices; before 1.1.40 build 160989 on EA6300, EA6400, EA6500, and EA6700 devices; and before 1.1.42 build 161129 on EA6900 devices allows remote attackers to obtain the administrator's MD5 password hash via a direct request for the /.htpasswd URI.

Linksys SMART WiFi firmware on EA2700 and EA3500 devices; before 2.1.41 build 162351 on E4200v2 and EA4500 devices; before 1.1.41 build 162599 on EA6200 devices; before 1.1.40 build 160989 on EA6300, EA6400, EA6500, and EA6700 devices; and before 1.1.42 build 161129 on EA6900 devices allows remote attackers to obtain sensitive information or modify data via a JNAP action in a JNAP/ HTTP request.

In Vecna VGo Robot versions prior to 3.0.3.52164, an attacker may be able to capture firmware updates through the adjacent network.

All versions up to V1.1.10P3T18 of ZTE ZXHN F670 product are impacted by information exposure vulnerability, which may allow an unauthenticated attacker to get the GPON SN information via appviahttp service.

The WPS implementation on I-O DATA DEVICE WN-GDN/R3, WN-GDN/R3-C, WN-GDN/R3-S, and WN-GDN/R3-U devices does not limit PIN guesses, which allows remote attackers to obtain network access via a brute-force attack.

Huawei B315s-22 products with software of 21.318.01.00.26 have an information leak vulnerability. Unauthenticated adjacent attackers may exploit this vulnerability to obtain device information.

Insufficient input validation in the Intel Driver & Support Assistant before 3.6.0.4 may allow an unauthenticated user to potentially enable information disclosure via adjacent access.

IBM Security Verify Privilege On-Premises 11.5 could allow a user to obtain version number information using a specially crafted HTTP request that could be used in further attacks against the system. IBM X-Force ID: 207899.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of Silicon Labs Gecko OS. Authentication is not required to exploit this vulnerability. The specific flaw exists within the debug interface. The issue results from the lack of proper validation of a user-supplied string before using it as a format specifier. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the device.

Siemens RUGGEDCOM ROS before 4.2.1 allows remote attackers to obtain sensitive information by sniffing the network for VLAN data within the padding section of an Ethernet frame.

The Bluetooth Low Energy (BLE) subsystem on Tapplock devices before 2018-06-12 relies on Key1 and SerialNo for unlock operations; however, these are derived from the MAC address, which is broadcasted by the device.

A CWE-200: Exposure of Sensitive Information to an Unauthorized Actor vulnerability exists in Modicon M221 (all references, all versions) that could allow non sensitive information disclosure when the attacker has captured the traffic between EcoStruxure Machine - Basic software and Modicon M221 controller.

Mozilla Firefox 3.x before 3.0.6 does not properly implement the (1) no-store and (2) no-cache Cache-Control directives, which allows local users to obtain sensitive information by using the (a) back button or (b) history list of the victim's browser, as demonstrated by reading the response page of an https POST request.

A vulnerability has been found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /currentsetting.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.0 SP2). The affected software has an information disclosure vulnerability that could allow an attacker to retrieve VPN connection for a known user.

A vulnerability was found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this issue is some unknown functionality of the file /debuginfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253382 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

ASUS Japan WL-330NUL devices with firmware before 3.0.0.42 allow remote attackers to discover the WPA2-PSK passphrase via unspecified vectors.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.0 SP2). The affected software has an information disclosure vulnerability that could allow an attacker to retrieve a list of network devices a known user can manage.

A vulnerability was found in Rebuild up to 3.5.5 and classified as problematic. This issue affects the function QiniuCloud.getStorageFile of the file /filex/proxy-download. The manipulation of the argument url leads to information disclosure. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252455.

NETGEAR GS810EMX devices before 1.0.0.5 are affected by disclosure of sensitive information.

A vulnerability classified as problematic was found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected by this vulnerability is the function sub_41E304 of the file /H5/state_view.data of the component HTTP Endpoint. The manipulation leads to information disclosure. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used.

The Mail Drop feature in Mail in Apple OS X before 10.11 mishandles encryption parameters for attachments, which makes it easier for remote attackers to obtain sensitive information by sniffing the network during transmission of an S/MIME e-mail message with a large attachment.

A vulnerability was found in Hikvision Intercom Broadcasting System 3.0.3_20201113_RELEASE(HIK). It has been classified as problematic. This affects an unknown part of the file access/html/system.html of the component Log File Handler. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. Upgrading to version 4.1.0 is able to address this issue. It is recommended to upgrade the affected component. The identifier VDB-248253 was assigned to this vulnerability.

An out of bounds read was discovered in systemd-journald in the way it parses log messages that terminate with a colon ':'. A local attacker can use this flaw to disclose process memory data. Versions from v221 to v239 are vulnerable.

Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allow an attacker on the same network segment to obtain information registered on the device via unspecified vectors.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

The Netlogon service in Microsoft Windows Server 2003 SP2 and R2 SP2, Windows Server 2008 SP2 and R2 SP1, and Windows Server 2012 Gold and R2 does not properly implement domain-controller communication, which allows remote attackers to discover credentials by leveraging certain PDC access and spoofing the BDC role in a PDC communication channel, aka "Elevation of Privilege Vulnerability in Netlogon."

Improper Access Control vulnerability in web service of Secomea SiteManager allows local attacker without credentials to gather network information and configuration of the SiteManager. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.

Schneider Electric InduSoft Web Studio before 7.1.3.4 SP3 Patch 4 and InTouch Machine Edition 2014 before 7.1.3.4 SP3 Patch 4 transmit cleartext credentials, which allows remote attackers to obtain sensitive information by sniffing the network.

Padding bytes in Ethernet packets on PA-200, PA-220, PA-500, PA-800, PA-2000 Series, PA-3000 Series, PA-3200 Series, PA-5200 Series, and PA-7000 Series firewalls are not cleared before the data frame is created. This leaks a small amount of random information from the firewall memory into the Ethernet packets. An attacker on the same Ethernet subnet as the PAN-OS firewall is able to collect potentially sensitive information from these packets. This issue is also known as Etherleak and is detected by security scanners as CVE-2003-0001. This issue impacts: PAN-OS 8.1 version earlier than PAN-OS 8.1.18; PAN-OS 9.0 versions earlier than PAN-OS 9.0.12; PAN-OS 9.1 versions earlier than PAN-OS 9.1.5.

The API service on Google Home and Chromecast devices before mid-July 2018 does not prevent DNS rebinding attacks from reading the scan_results JSON data, which allows remote attackers to determine the physical location of most web browsers by leveraging the presence of one of these devices on its local network, extracting the scan_results bssid fields, and sending these fields in a geolocation/v1/geolocate Google Maps Geolocation API request.

Home Assistant is open source home automation software. Prior to version 2023.12.3, the login page discloses all active user accounts to any unauthenticated browsing request originating on the Local Area Network. Version 2023.12.3 contains a patch for this issue. When starting the Home Assistant 2023.12 release, the login page returns all currently active user accounts to browsing requests from the Local Area Network. Tests showed that this occurs when the request is not authenticated and the request originated locally, meaning on the Home Assistant host local subnet or any other private subnet. The rationale behind this is to make the login more user-friendly and an experience better aligned with other applications that have multiple user-profiles. However, as a result, all accounts are displayed regardless of them having logged in or not and for any device that navigates to the server. This disclosure is mitigated by the fact that it only occurs for requests originating from a LAN address. But note that this applies to the local subnet where Home Assistant resides and to any private subnet that can reach it.

Cisco-Meraki MS, MR, and MX devices with firmware before 2014-09-24 allow remote attackers to obtain sensitive credential information by leveraging unspecified HTTP handler access on the local network, aka Cisco-Meraki defect ID 00302012.

The Samba Active Directory LDAP server was vulnerable to an information disclosure flaw because of missing access control checks. An authenticated attacker could use this flaw to extract confidential attribute values using LDAP search expressions. Samba versions before 4.6.16, 4.7.9 and 4.8.4 are vulnerable.

An issue was discovered in WiZ Colors A60 1.14.0. The device sends unnecessary information to the cloud controller server. Although this information is sent encrypted and has low risk in isolation, it decreases the privacy of the end user. The information sent includes the local IP address being used and the SSID of the Wi-Fi network the device is connected to. (Various resources such as wigle.net can be use for mapping of SSIDs to physical locations.)

On Fitbit activity-tracker devices, certain addresses never change. According to the popets-2019-0036.pdf document, this leads to "permanent trackability" and "considerable privacy concerns" without a user-accessible anonymization feature. The devices, such as Charge 2, transmit Bluetooth Low Energy (BLE) advertising packets with a TxAdd flag indicating random addresses, but the addresses remain constant. If devices come within BLE range at one or more locations where an adversary has set up passive sniffing, the adversary can determine whether the same device has entered one of these locations.

A vulnerability was found in IROAD Dash Cam FX2 up to 20250308. It has been classified as problematic. Affected is an unknown function of the file /mnt/extsd/event/ of the component HTTP/RTSP. The manipulation leads to information disclosure. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used.

Juniper Networks ScreenOS devices do not pad Ethernet packets with zeros, and thus some packets can contain fragments of system memory or data from previous packets. This issue is often detected as CVE-2003-0001. The issue affects all versions of Juniper Networks ScreenOS prior to 6.3.0r25.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices makes it easy for remote attackers to determine the hidden SSID and passphrase for a Home Security Wi-Fi network.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover the CM MAC address by connecting to the device's xfinitywifi hotspot.

The Track My Mobile feature in the SamsungDive subsystem for Android on Samsung Galaxy devices shows the activation of remote tracking, which might allow physically proximate attackers to defeat a product-recovery effort by tampering with this feature or its location data.

Symantec Messaging Gateway (SMG) before 10.0 allows remote attackers to obtain potentially sensitive information about component versions via unspecified vectors.

The DNAv4 protocol implementation in the DHCP component in Apple iOS before 6 sends Wi-Fi packets containing a MAC address of a host on a previously used network, which might allow remote attackers to obtain sensitive information about previous device locations by sniffing an unencrypted Wi-Fi network for these packets.

The Hide My Site plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.2 due to the plugin not restricting access to the REST API when password protection is enabled. This makes it possible for unauthenticated attackers to gain unauthorized access to the site.

Under certain conditions, through a request directed to the Waybox Enel X web management application, information like Waybox OS version or service configuration details could be obtained.

A vulnerability in the multicast DNS (mDNS) protocol configuration of Cisco Webex Meetings Client for MacOS could allow an unauthenticated adjacent attacker to obtain sensitive information about the device on which the Webex client is running. The vulnerability exists because sensitive information is included in the mDNS reply. An attacker could exploit this vulnerability by doing an mDNS query for a particular service against an affected device. A successful exploit could allow the attacker to gain access to sensitive information.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.32, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.16, R6300v2 before 1.0.4.18, R6400 before 1.01.32, R6400v2 before 1.0.2.44, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7000 before 1.0.9.14, R7000P before 1.3.0.8, R6900P before 1.3.0.8, R7100LG before 1.0.0.34, R7300DST before 1.0.0.56, R7900 before 1.0.1.26, R8000 before 1.0.4.4, R8500 before 1.0.2.106, R8300 before 1.0.2.106, and WNDR3400v3 before 1.0.1.16.