A vulnerability, which was classified as critical, was found in H3C Magic NX15, Magic NX400 and Magic R3010 up to V100R014. This affects the function FCGI_WizardProtoProcess of the file /api/wizard/getsyncpppoecfg of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability classified as critical has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. Affected is the function FCGI_CheckStringIfContainsSemicolon of the file /api/wizard/getBasicInfo of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014 and classified as critical. This issue affects the function FCGI_CheckStringIfContainsSemicolon of the file /api/wizard/getCapabilityWeb of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack to succeed. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

Multiple authenticated command injection vulnerabilities exist in the Aruba InstantOS and ArubaOS 10 command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. To exploit these vulnerabilities, the attacker must have valid device credentials, but does not need Administrator privileges. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device, including on the underlying operating system, which could also affect the availability of the device.

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

A vulnerability classified as critical was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400 and Magic R3010 up to V100R014. Affected by this vulnerability is the function FCGI_WizardProtoProcess of the file /api/wizard/getCapability of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

CompleteFTPService.exe in the server in EnterpriseDT CompleteFTP before 12.1.4 allows Remote Code Execution by leveraging a Windows user account that has SSH access. The exec command is always run as SYSTEM.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to incorrect input validation of user-supplied data by the NX-API subsystem. An attacker could exploit this vulnerability by sending malicious HTTP or HTTPS packets to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to perform a command-injection attack and execute arbitrary commands with root privileges. Note: NX-API is disabled by default. MDS 9000 Series Multilayer Switches are affected running software versions prior to 8.1(1b) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected running software versions prior to 7.3(4)N1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 7.3(3)D1(1) and 8.2(3).

An authenticated remote code execution vulnerability exists in the AOS-CX Network Analytics Engine. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system, leading to a complete compromise of the switch running AOS-CX.

A vulnerability has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400 and Magic R3010 up to V100R014 and classified as critical. This vulnerability affects the function FCGI_WizardProtoProcess of the file /api/wizard/setsyncpppoecfg of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. It has been declared as critical. Affected by this vulnerability is the function FCGI_CheckStringIfContainsSemicolon of the file /api/wizard/getLanguage of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

Delta Electronics InfraSuite Device Master versions prior to 1.0.5 contain a command injection vulnerability that could allow an attacker to inject arbitrary commands, which could result in remote code execution.

Combodo iTop is an open source, web based IT Service Management tool. In versions prior to 2.7.4, there is a command injection vulnerability in the Setup Wizard when providing Graphviz executable path. The vulnerability is patched in version 2.7.4 and 3.0.0.

Bitbucket Server and Bitbucket Data Center versions starting from version 3.0.0 before version 5.16.11, from version 6.0.0 before 6.0.11, from version 6.1.0 before 6.1.9, from version 6.2.0 before 6.2.7, from version 6.3.0 before 6.3.6, from version 6.4.0 before 6.4.4, from version 6.5.0 before 6.5.3, from version 6.6.0 before 6.6.3, from version 6.7.0 before 6.7.3, from version 6.8.0 before 6.8.2, and from version 6.9.0 before 6.9.1 had a Remote Code Execution vulnerability via certain user input fields. A remote attacker with user level permissions can exploit this vulnerability to run arbitrary commands on the victim's systems. Using a specially crafted payload as user input, the attacker can execute arbitrary commands on the victim's Bitbucket Server or Bitbucket Data Center instance.

The handle_certificate function in /vmi/manager/engine/management/commands/apns_worker.py in Trend Micro Virtual Mobile Infrastructure before 5.1 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the password to api/v1/cfg/oauth/save_identify_pfx/.

An issue was discovered in GitLab Community and Enterprise Edition 11.11. A specially crafted payload would allow an authenticated malicious user to execute commands remotely through the repository download feature. It allows Command Injection.

In WebAccess versions 8.4.1 and prior, multiple command injection vulnerabilities are caused by a lack of proper validation of user-supplied data and may allow arbitrary file deletion and remote code execution.

Improper neutralization of special elements used in a command ('Command Injection') vulnerability in task management component in Synology Download Station before 3.8.16-3566 allows remote authenticated users to execute arbitrary code via unspecified vectors.

In Bender/ebee Charge Controllers in multiple versions are prone to Command injection via Web interface. An authenticated attacker could enter shell commands into some input fields.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Arris TG2482A firmware through 9.1.103GEM9 allow Remote Code Execution (RCE) via the ping utility feature.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 1). An authenticated remote attacker with access to the Web Based Management (443/tcp) of the affected product, could potentially inject commands into the dhcpd configuration of the affected product. An attacker might leverage this to trigger remote code execution on the affected component.

Aztech WMB250AC Mesh Routers Firmware Version 016 2020 devices improperly manage sessions, which allows remote attackers to bypass authentication in opportunistic circumstances and execute arbitrary commands with administrator privileges by leveraging an existing web portal login.

Dell Unisphere for PowerMax vApp, VASA Provider vApp, and Solution Enabler vApp version 9.2.3.x contain a command execution vulnerability. A low privileged remote attacker could potentially exploit this vulnerability, leading to execute arbitrary commands on the underlying system.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. It has been rated as critical. Affected by this issue is some unknown functionality of the file /api/wizard/getWifiNeighbour of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

D-Link COVR 1200,1202,1203 v1.08 was discovered to contain a command injection vulnerability via the system_time_timezone parameter at function SetNTPServerSettings.

An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the IPAddress key.

China Mobile An Lianbao WF-1 V1.0.1 router provides a web interface /api/ZRMesh/set_ZRMesh which receives parameters by POST request, and the parameter mesh_enable and mesh_device have a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /api/wizard/getDualbandSync of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

D-Link COVR 1200,1202,1203 v1.08 was discovered to contain a command injection vulnerability via the /SetTriggerWPS/PIN parameter at function SetTriggerWPS.

CF UAA versions prior to 74.1.0, allow external input to be directly queried against. A remote malicious user with 'client.write' and 'groups.update' can craft a SCIM query, which leaks information that allows an escalation of privileges, ultimately allowing the malicious user to gain control of UAA scopes they should not have.

D-Link COVR 1200,1203 v1.08 was discovered to contain a command injection vulnerability via the tomography_ping_number parameter at function SetNetworkTomographySettings.

Autolab is a course management service, initially developed by a team of students at Carnegie Mellon University, that enables instructors to offer autograded programming assignments to their students over the Web. A remote code execution vulnerability was discovered in Autolab's MOSS functionality, whereby an instructor with access to the feature might be able to execute code on the server hosting Autolab. This vulnerability has been patched in version 2.10.0. As a workaround, disable the MOSS feature if it is unneeded by replacing the body of `run_moss` in `app/controllers/courses_controller.rb` with `render(plain: "Feature disabled", status: :bad_request) && return`.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

China Mobile An Lianbao WF-1 V1.0.1 router provides a web interface /api/ZRRuleFilter/set_firewall_level which receives parameters by POST request, and the parameter firewall_level has a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

A vulnerability, which was classified as critical, was found in H3C Magic NX30 Pro up to V100R007. This affects an unknown part of the file /api/wizard/getNetworkStatus of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack to succeed. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability, which was classified as critical, has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. Affected by this issue is some unknown functionality of the file /api/esps of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability classified as critical was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. Affected by this vulnerability is an unknown functionality of the file /api/login/auth of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014 and classified as critical. This issue affects some unknown processing of the file /api/wizard/networkSetup of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

In affected versions of Octopus Deploy it is possible for a user to introduce code via offline package creation

Gerapy is a distributed crawler management framework. Prior to version 0.9.9, an authenticated user could execute arbitrary commands. This issue is fixed in version 0.9.9. There are no known workarounds.

A vulnerability has been found in H3C Magic NX30 Pro and Magic NX400 up to V100R014 and classified as critical. This vulnerability affects unknown code of the file /api/wizard/getNetworkConf. The manipulation leads to command injection. The attack needs to be approached within the local network. It is recommended to upgrade the affected component.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. It has been classified as critical. Affected is an unknown function of the file /api/wizard/getssidname of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

Mattermost versions 10.4.x <= 10.4.2, 10.3.x <= 10.3.3, 9.11.x <= 9.11.8 fail to restrict command execution in archived channels, which allows authenticated users to run commands in archived channels.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.