Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection'), Improper Privilege Management vulnerability in openEuler migration-tools on Linux allows Command Injection, Restful Privilege Elevation. This vulnerability is associated with program files https://gitee.Com/openeuler/migration-tools/blob/master/index.Py. This issue affects migration-tools: from 1.0.0 through 1.0.1.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in openEuler aops-ceres on Linux allows Command Injection. This vulnerability is associated with program files ceres/function/util.Py. This issue affects aops-ceres: from 1.3.0 through 1.4.1.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in openEuler gala-gopher on Linux allows Command Injection. This vulnerability is associated with program files https://gitee.Com/openeuler/gala-gopher/blob/master/src/probes/extends/ebpf.Probe/src/ioprobe/ioprobe.C. This issue affects gala-gopher: through 1.0.2.

An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios.

User provided input is not sanitized on the AXIS License Plate Verifier specific “api.cgi” allowing for arbitrary code execution.

User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands with the privileges of root. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

A command injection vulnerability is present in Aruba Instant that permits an authenticated administrative user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. Workaround: None. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.0

A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.

NETGEAR Prosafe WC9500 5.1.0.17, WC7600 5.1.0.17, and WC7520 2.5.0.35 devices allow a remote attacker to execute code with root privileges via shell metacharacters in the reqMethod parameter to login_handler.php.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A command injection vulnerability was identified in SMM/SMM2 and FPC that could allow an authenticated user with elevated privileges to execute system commands when performing a specific administrative function.

A vulnerability classified as critical has been found in D-Link DIR-818LW up to 20191215. This affects an unknown part of the component System Time Page. The manipulation of the argument NTP Server leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

OS command injection in Ivanti Endpoint Manager Mobile (EPMM) before version 12.5.0.2 allows a remote authenticated attacker with high privileges to achieve remote code execution

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

NETGEAR DGN2200v4 devices before 2017-01-06 are affected by command execution and an FTP insecure root directory.

OS command injection in Ivanti Endpoint Manager Mobile (EPMM) before version 12.5.0.2,12.4.0.3 and 12.3.0.3 allows a remote authenticated attacker with high privileges to achieve remote code execution

A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition.

Three OS command injection vulnerabilities exist in the web interface I/O configuration functionality of MC Technologies MC LR Router 2.10.5. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability refers to the authenticated OS Command Injection that occurs through the attacker-controlled `btn1` parameter, at offset `0x8eb0`.

A vulnerability has been identified in SINEC NMS (All versions < V1.0 SP2). The affected application incorrectly neutralizes special elements when creating batch operations which could lead to command injection. An authenticated remote attacker with administrative privileges could exploit this vulnerability to execute arbitrary code on the system with system privileges.

NetModule NSRW web administration interface executes an OS command constructed with unsanitized user input. A successful exploit could allow an authenticated user to execute arbitrary commands with elevated privileges. This issue affects NSRW: from 4.3.0.0 before 4.3.0.119, from 4.4.0.0 before 4.4.0.118, from 4.6.0.0 before 4.6.0.105, from 4.7.0.0 before 4.7.0.103.

Dell vApp Manager, versions prior to 9.2.4.9 contain a Command Injection Vulnerability. An authorized attacker could potentially exploit this vulnerability leading to an execution of an inserted command. Dell recommends customers to upgrade at the earliest opportunity.

Dell vApp Manager, versions prior to 9.2.4.9 contain a Command Injection Vulnerability. An authorized attacker could potentially exploit this vulnerability leading to an execution of an inserted command. Dell recommends customers to upgrade at the earliest opportunity.

The Unlimited Elements For Elementor (Free Widgets, Addons, Templates) plugin for WordPress is vulnerable to command injection in all versions up to, and including, 1.5.102. This is due to insufficient filtering of template attributes during the creation of HTML for custom widgets This makes it possible for authenticated attackers, with administrator-level access and above, to execute arbitrary commands on the server.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_battery_mode` POST parameter.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_ac_mode` POST parameter parameter.

Aruba AirWave before 7.7.14.2 and 8.x before 8.0.7 allows VisualRF remote OS command execution and file disclosure by administrative users.

ThreatSonar Anti-Ransomware developed by TeamT5 has an OS Command Injection vulnerability, allowing remote attackers with product platform intermediate privileges to inject arbitrary OS commands and execute them on the server, thereby gaining administrative access to the remote host.

The end-of-life Netgear FVS336Gv2 and FVS336Gv3 are affected by a command injection vulnerability in the Telnet interface. An authenticated and remote attacker can execute arbitrary OS commands as root over Telnet by sending crafted "util backup_configuration" commands.

Hitron CODA-5310 has insufficient filtering for specific parameters in the connection test function. A remote attacker authenticated as an administrator, can use the management page to perform command injection attacks, to execute arbitrary system command, manipulate system or disrupt service.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability via the url parameter of an authenticated enpoint in Enphase IQ Gateway (formerly known as Enphase) allows OS Command Injection.This issue affects Envoy: 4.x <= 7.x

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_normal_mode` parameter.

A vulnerability in the web-based management interface of Cisco ATA 190 Multiplatform Series Analog Telephone Adapter firmware could allow an authenticated, remote attacker with high privileges to execute arbitrary commands as the root user on the underlying operating system. This vulnerability is due to a lack of input sanitization in the web-based management interface. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.

The post-authentication command injection vulnerability in the Zyxel NAS326 firmware versions prior to V5.21(AAZF.13)C0 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device remotely.

Multiple vulnerabilities in Cisco Routed PON Controller Software, which runs as a docker container on hardware that is supported by Cisco IOS XR Software, could allow an authenticated, remote attacker with Administrator-level privileges on the PON Manager or direct access to the PON Manager MongoDB instance to perform command injection attacks on the PON Controller container and execute arbitrary commands as root. These vulnerabilities are due to insufficient validation of arguments that are passed to specific configuration commands. An attacker could exploit these vulnerabilities by including crafted input as the argument of an affected configuration command. A successful exploit could allow the attacker to execute arbitrary commands as root on the PON controller.

Cursor is a code editor built for programming with AI. In versions 1.2.4 and below, attackers can achieve remote and persistent code execution by modifying an already trusted MCP configuration file inside a shared GitHub repository or editing the file locally on the target's machine. Once a collaborator accepts a harmless MCP, the attacker can silently swap it for a malicious command (e.g., calc.exe) without triggering any warning or re-prompt. If an attacker has write permissions on a user's active branches of a source repository that contains existing MCP servers the user has previously approved, or allows an attacker has arbitrary file-write locally, the attacker can achieve arbitrary code execution. This is fixed in version 1.3.

WRC-BE36QS-B and WRC-W701-B contain an improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in WebGUI. If exploited, an arbitrary OS command may be executed by a remote attacker who can log in to WebGUI.

An OS command injection vulnerability within the update functionality may allow an authenticated administrator to execute unauthorized arbitrary OS commands. Users with administrative privileges may upload update packages to upgrade the versions of Nozomi Networks Guardian and CMC. While these updates are signed and their signatures are validated prior to installation, an improper signature validation check has been identified. This issue could potentially enable users to execute commands remotely on the appliance, thereby impacting confidentiality, integrity, and availability.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

Certain models of routers from Billion Electric has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject arbitrary system commands into a specific SSH function and execute them on the device.

A post-authentication command injection vulnerability in the ”zyUtilMailSend” function of the Zyxel AX7501-B1 firmware version V5.17(ABPC.5.3)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

The Four-Faith router models F3x24 and F3x36 are affected by an operating system (OS) command injection vulnerability. At least firmware version 2.0 allows authenticated and remote attackers to execute arbitrary OS commands over HTTP when modifying the system time via apply.cgi. Additionally, this firmware version has default credentials which, if not changed, would effectively change this vulnerability into an unauthenticated and remote OS command execution issue.

A post-authentication command injection vulnerability in the "ZyEE" function of the Zyxel EX5601-T1 firmware version V5.70(ACDZ.3.6)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

A vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) which can allow an attacker with existing administrative privileges to inject commands and run as a site user.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.