FirstUseAuthenticator is a JupyterHub authenticator that helps new users set their password on their first login to JupyterHub. When JupyterHub is used with FirstUseAuthenticator, a vulnerability in versions prior to 1.0.0 allows unauthorized access to any user's account if `create_users=True` and the username is known or guessed. One may upgrade to version 1.0.0 or apply a patch manually to mitigate the vulnerability. For those who cannot upgrade, there is no complete workaround, but a partial mitigation exists. One can disable user creation with `c.FirstUseAuthenticator.create_users = False`, which will only allow login with fully normalized usernames for already existing users prior to jupyterhub-firstuserauthenticator 1.0.0. If any users have never logged in with their normalized username (i.e. lowercase), they will still be vulnerable until a patch or upgrade occurs.

JupyterHub is an open source multi-user server for Jupyter notebooks. In affected versions users who have multiple JupyterLab tabs open in the same browser session, may see incomplete logout from the single-user server, as fresh credentials (for the single-user server only, not the Hub) reinstated after logout, if another active JupyterLab session is open while the logout takes place. Upgrade to JupyterHub 1.5. For distributed deployments, it is jupyterhub in the _user_ environment that needs patching. There are no patches necessary in the Hub environment. The only workaround is to make sure that only one JupyterLab tab is open when you log out.

gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.

A vulnerability was found in Forged Alliance Forever up to 3746. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component Vote Handler. The manipulation leads to improper authorization. Upgrading to version 3747 is able to address this issue. The patch is named 6880971bd3d73d942384aff62d53058c206ce644. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-217555.

The application management module has a vulnerability in permission verification. Successful exploitation of this vulnerability causes unexpected clear of device applications.

PolarLearn is a free and open-source learning program. In 0-PRERELEASE-16 and earlier, the group chat WebSocket at wss://polarlearn.nl/api/v1/ws can be used without logging in. An unauthenticated client can subscribe to any group chat by providing a group UUID, and can also send messages to any group. The server accepts the message and stores it in the group’s chatContent, so this is not just a visual spam issue.

In OpenDaylight Model-Driven Service Abstraction Layer (MD-SAL) through 13.0.1, a controller with a follower role can configure flow entries in an OpenDaylight clustering deployment.

In the module "PayPal Official" for PrestaShop 7+ releases prior to version 6.4.2 and for PrestaShop 1.6 releases prior to version 3.18.1, a malicious customer can confirm an order even if payment is finally declined by PayPal. A logical weakness during the capture of a payment in case of disabled webhooks can be exploited to create an accepted order. This could allow a threat actor to confirm an order with a fraudulent payment support. Versions 6.4.2 and 3.18.1 contain a patch for the issue. Additionally, users enable webhooks and check they are callable.

The Transposh WordPress Translation plugin for WordPress is vulnerable to unauthorized setting changes by unauthenticated users in versions up to, and including, 1.0.9.6. This is due to insufficient validation of settings on the 'tp_translation' AJAX action which makes it possible for unauthenticated attackers to bypass any restrictions and influence the data shown on the site. Please note this is a separate issue from CVE-2022-2461. Notes from the researcher: When installed Transposh comes with a set of pre-configured options, one of these is the "Who can translate" setting under the "Settings" tab. However, this option is largely ignored, if Transposh has enabled its "autotranslate" feature (it's enabled by default) and the HTTP POST parameter "sr0" is larger than 0. This is caused by a faulty validation in "wp/transposh_db.php."

Insufficient policy enforcement in Site Isolation in Google Chrome prior to 124.0.6367.60 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium)

IBM Db2 12.1.0 through 12.1.4 is vulnerable to authorization bypass when uploading to a remote object storage path with a special query.

A vulnerability was found in Fanli2012 native-php-cms 1.0 and classified as critical. This issue affects some unknown processing of the file /fladmin/sysconfig_doedit.php of the component Backend. The manipulation leads to improper authorization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Improper authorization in Microsoft Exchange Online allows an unauthorized attacker to disclose information over a network.

A vulnerability classified as critical was found in SourceCodester Prison Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /classes/Users.php?f=save of the component New User Creation. The manipulation leads to improper authorization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Improper Authorization vulnerability when multiple method constraints define an HTTP method for the same extension in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.21, from 10.1.0-M1 through 10.1.54, from 9.0.0.M1 through 9.0.117, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Users are recommended to upgrade to version 11.0.22, 10.1.55 or 9.0.118 which fix the issue.

Improper Authorization in GitHub repository cobbler/cobbler prior to 3.3.2.

free5GC is an open-source implementation of the 5G core network. In versions 1.4.2 and below of the UDR service, the handler for deleting Traffic Influence Subscriptions checks whether the influenceId path segment equals subs-to-notify, but does not return after sending the HTTP 404 response when validation fails. Execution continues and the subscription is deleted regardless. An unauthenticated attacker with access to the 5G Service Based Interface can delete arbitrary Traffic Influence Subscriptions by supplying any value for the influenceId path segment, while the API misleadingly returns a 404 Not Found response. A patched version was not available at the time of publication.

free5GC is an open-source implementation of the 5G core network. In versions 4.2.1 and below of the UDR service, the handler for creating or updating Traffic Influence Subscriptions checks whether the influenceId path segment equals subs-to-notify, but does not return after sending the HTTP 404 response when validation fails. Execution continues and the subscription is created or overwritten regardless. An unauthenticated attacker with access to the 5G Service Based Interface can create or overwrite arbitrary Traffic Influence Subscriptions, including injecting attacker-controlled notificationUri values and arbitrary SUPIs, by supplying any value for the influenceId path segment. A patched version was not available at the time of publication.

Improper authorization in Microsoft PC Manager allows an unauthorized attacker to elevate privileges over a network.

Azure Portal Elevation of Privilege Vulnerability

A vulnerability classified as critical has been found in ageerle ruoyi-ai up to 2.0.0. Affected is an unknown function of the file ruoyi-modules/ruoyi-system/src/main/java/org/ruoyi/system/controller/system/SysNoticeController.java. The manipulation leads to improper authorization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.0.1 is able to address this issue. The name of the patch is 6382e177bf90cc56ff70521842409e35c50df32d. It is recommended to upgrade the affected component.

A vulnerability was found in kishor-23 Food Waste Management System 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /admin/admin.php. The manipulation leads to improper authorization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-257056. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Next.js is a React framework for building full-stack web applications. Starting in version 1.11.4 and prior to versions 12.3.5, 13.5.9, 14.2.25, and 15.2.3, it is possible to bypass authorization checks within a Next.js application, if the authorization check occurs in middleware. If patching to a safe version is infeasible, it is recommend that you prevent external user requests which contain the x-middleware-subrequest header from reaching your Next.js application. This vulnerability is fixed in 12.3.5, 13.5.9, 14.2.25, and 15.2.3.

In express-jwt (NPM package) up and including version 5.3.3, the algorithms entry to be specified in the configuration is not being enforced. When algorithms is not specified in the configuration, with the combination of jwks-rsa, it may lead to authorization bypass. You are affected by this vulnerability if all of the following conditions apply: - You are using express-jwt - You do not have **algorithms** configured in your express-jwt configuration. - You are using libraries such as jwks-rsa as the **secret**. You can fix this by specifying **algorithms** in the express-jwt configuration. See linked GHSA for example. This is also fixed in version 6.0.0.

Improper Authorization in GitHub repository modoboa/modoboa prior to 2.1.0.

Improper Authorization vulnerability in Drupal Open Social allows Collect Data from Common Resource Locations.This issue affects Open Social: from 0.0.0 before 12.0.5.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

An issue was discovered in the fp_newsletter (aka Newsletter subscriber management) extension before 1.1.1, 1.2.0, 2.x before 2.1.2, 2.2.1 through 2.4.0, and 3.x before 3.2.6 for TYPO3. Attackers can unsubscribe everyone via a series of modified subscription UIDs in deleteAction operations.

@keystone-6/core is a core package for Keystone 6, a content management system for Node.js. Starting with version 2.2.0 and prior to version 2.3.1, users who expected their `multiselect` fields to use the field-level access control - if configured - are vulnerable to their field-level access control not being used. List-level access control is not affected. Field-level access control for fields other than `multiselect` are not affected. Version 2.3.1 contains a fix for this issue. As a workaround, stop using the `multiselect` field.

A vulnerability exists in a SDM600 endpoint. An attacker could exploit this vulnerability by running multiple parallel requests, the SDM600 web services become busy rendering the application unresponsive. This issue affects: All SDM600 versions prior to version 1.2 FP3 HF4 (Build Nr. 1.2.23000.291) List of CPEs: * cpe:2.3:a:hitachienergy:sdm600:1.0:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.1:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.9002.257:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.10002.257:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.11002.149:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.12002.222:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.13002.72:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.44:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.92:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.108:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.182:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.257:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.342:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.447:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.481:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.506:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.14002.566:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.20000.3174:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.21000.291:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.21000.931:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.21000.105:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:sdm600:1.2.23000.291:*:*:*:*:*:*:*

Dell Unisphere for PowerMax vApp version prior to 10.0.0.2, contains an authorization bypass vulnerability in the  Unisphere for VMAX application running in vApp

Improper caller check in AR Emoji prior to SMR Jun-2022 Release 1 allows untrusted applications to use some camera functions via deeplink.

Improper authorization vulnerability in Galaxy Store prior to 4.5.36.5 allows remote app installation of the allowlist.

Tad Book3 editing book page does not perform identity verification. Remote attackers can use the vulnerability to view and modify arbitrary content of books without permission.