A buffer overflow vulnerability was discovered in D-Link DSL-3782 v1.01 via the destination, netmask, and gateway parameters. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A buffer overflow vulnerability was discovered in D-Link DSL-3782 v1.01, triggered by the destination, netmask and gateway parameters. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A buffer overflow vulnerability was discovered in D-Link DSL-3782 v1.01 via the sstartip, sendip, dstartip, and dendip parameters. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

DI-8100 v16.07.26A1 is vulnerable to Buffer Overflow In the ip_position_asp function via the ip parameter.

D-Link DSL-3782 v1.01 is vulnerable to Buffer Overflow in /New_GUI/ParentalControl.asp.

A vulnerability was found in D-Link DIR-600 up to 2.15WWb02. Affected by this vulnerability is an unknown functionality of the file hedwig.cgi of the component HTTP Header Handler. The manipulation of the argument Cookie results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in D-Link DWR-M920 up to 1.1.50. Impacted is the function sub_42261C of the file /boafrm/formFilter. The manipulation of the argument ip6addr results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited.

A vulnerability has been found in D-Link DIR-816L 2_06_b09_beta. This affects the function genacgi_main of the file gena.cgi. The manipulation of the argument SERVER_ID/HTTP_SID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-816L 2_06_b09_beta. This vulnerability affects the function scandir_main of the file /portal/__ajax_exporer.sgi. The manipulation of the argument en results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DIR-816L 2_06_b09_beta. Affected by this vulnerability is the function authenticationcgi_main of the file /authentication.cgi. Performing manipulation of the argument Password results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DCS-935L up to 1.13.01. The impacted element is the function sub_402280 of the file /HNAP1/. The manipulation of the argument HNAP_AUTH/SOAPAction results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DAP-1325 SetHostIPv6StaticSettings StaticAddress Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18833.

D-Link DSL-3788 revA1 1.01R1B036_EU_EN is vulnerable to Buffer Overflow via the COMM_MAKECustomMsg function of the webproc cgi

D-Link DIR-3040 prog.cgi SetTriggerPPPoEValidate Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-3040 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed-size stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21653.

Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service.

A weakness has been identified in D-Link DI-8400 16.07.26A1. The affected element is the function yyxz_dlink_asp of the file /yyxz.asp. This manipulation of the argument ID causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the Cookie HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12028.

A vulnerability was found in D-Link DIR-513 1.0. It has been rated as critical. This issue affects the function formLanguageChange of the file /goform/formLanguageChange of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the webproc endpoint, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12104.

A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the var:page parameter provided to the webproc endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13271.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12029.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the var:menu parameter provided to the webproc endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13270.

D-Link DIR-2640 HTTP Referer Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2640-US routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within prog.cgi, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21853.

A stack-based buffer overflow vulnerability exists in D-Link DIR-605L Wireless N300 Cloud Router firmware versions 1.12 and 1.13 via the getAuthCode() function. The flaw arises from unsafe usage of sprintf() when processing user-supplied CAPTCHA data via the FILECODE parameter in /goform/formLogin. A remote unauthenticated attacker can exploit this to execute arbitrary code with root privileges on the device.

D-Link DAP-2622 DDP Reset Auth Username Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20056.

D-Link DAP-2622 DDP Reset Factory Auth Password Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20059.

D-Link DAP-1325 get_value_from_app Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18823.

D-Link DAP-1325 SetSetupWizardStatus Enabled Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18838.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. When parsing the getpage parameter, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10932.

D-Link DAP-1360 webproc Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1360 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling requests to the /cgi-bin/webproc endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-18417.

D-Link DAP-1360 webproc var:sys_Token Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1360 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling requests to the /cgi-bin/webproc endpoint. When parsing the var:sys_Token parameter, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-18418.

D-Link COVR-2600R FW101b05 is vulnerable to Buffer Overflow. In the function sub_24E28, the HTTP_REFERER is obtained through an environment variable, and this field is controllable, allowing it to be used as the value for src.

Processing malformed SOAP messages when performing the HNAP Login action causes a buffer overflow in the stack in some D-Link DIR routers. The vulnerable XML fields within the SOAP body are: Action, Username, LoginPassword, and Captcha. The following products are affected: DIR-823, DIR-822, DIR-818L(W), DIR-895L, DIR-890L, DIR-885L, DIR-880L, DIR-868L, and DIR-850L.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formAdvNetwork.

autMan v2.9.6 allows attackers to bypass authentication via a crafted web request.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetRoute.

A vulnerability was identified in D-Link DIR-825 2.10. Affected by this vulnerability is the function get_ping_app_stat of the file ping_response.cgi of the component httpd. The manipulation of the argument ping_ipaddr leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formTcpipSetup.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the SOAPACTION parameter. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input, and possibly remote code execution.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetDomainFilter.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Cookie parameter. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input, and possibly remote code execution.

D-Link Go-RT-AC750 GORTAC750_A1_FW_v101b03 contains a stack-based buffer overflow via the function hnap_main. An attacker can send a POST request to trigger the vulnerablilify.

DIR-822 Rev. B Firmware v2.02KRB09 and DIR-822-CA Rev. B Firmware v2.03WWb01 suffer from a LAN-Side Unauthenticated Remote Code Execution (RCE) vulnerability elevated from HNAP Stack-Based Buffer Overflow.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the User-Agent parameter. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input, and possibly remote code execution.

D-Link DAP-2622 DDP Set IPv4 Address Auth Password Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20091.

D-Link DAP-1325 SetAPLanSettings Gateway Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18826.

D-Link DAP-1325 get_value_of_key Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18824.

D-Link DAP-1325 SetAPLanSettings DeviceName Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18825.

D-Link DAP-1325 SetHostIPv6StaticSettings StaticDNS2 Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18836.