BT SDP dissector infinite loop in Wireshark 4.0.0 to 4.0.7 and 3.6.0 to 3.6.15 allows denial of service via packet injection or crafted capture file

An issue was discovered in the demo/LINUXTCP implementation of cwalter-at freemodbus v.2018-09-12 allowing attackers to reach an infinite loop via a crafted length value for a packet.

An Improperly Implemented Security Check for Standard vulnerability in storm control of Juniper Networks Junos OS QFX5k devices allows packets to be punted to ARP queue causing a l2 loop resulting in a DDOS violations and DDOS syslog. This issue is triggered when Storm control is enabled and ICMPv6 packets are present on device. This issue affects Juniper Networks: Junos OS * All versions prior to 20.2R3-S6 on QFX5k; * 20.3 versions prior to 20.3R3-S5 on QFX5k; * 20.4 versions prior to 20.4R3-S5 on QFX5k; * 21.1 versions prior to 21.1R3-S4 on QFX5k; * 21.2 versions prior to 21.2R3-S3 on QFX5k; * 21.3 versions prior to 21.3R3-S2 on QFX5k; * 21.4 versions prior to 21.4R3 on QFX5k; * 22.1 versions prior to 22.1R3 on QFX5k; * 22.2 versions prior to 22.2R2 on QFX5k.

Transient DOS while parsing IPv6 extension header when WLAN firmware receives an IPv6 packet that contains `IPPROTO_NONE` as the next header.

Certain WithSecure products allow Denial of Service (infinite loop). This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

Certain WithSecure products allow an infinite loop in a scanning engine via unspecified file types. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

Certain WithSecure products allow an infinite loop in a scanning engine via unspecified file types. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

The RemoteAddr and LocalAddr methods on the returned net.Conn may call themselves, leading to an infinite loop which will crash the program due to a stack overflow.

xz is a compression and decompression library focusing on the xz format completely written in Go. The function readUvarint used to read the xz container format may not terminate a loop provide malicous input. The problem has been fixed in release v0.5.8. As a workaround users can limit the size of the compressed file input to a reasonable size for their use case. The standard library had recently the same issue and got the CVE-2020-16845 allocated.

An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.

cumulative-distribution-function is an open source npm library used which calculates statistical cumulative distribution function from data array of x values. In versions prior to 2.0.0 apps using this library on improper data may crash or go into an infinite-loop. In the case of a nodejs server-app using this library to act on invalid non-numeric data, the nodejs server may crash. This may affect other users of this server and/or require the server to be rebooted for proper operation. In the case of a browser app using this library to act on invalid non-numeric data, that browser may crash or lock up. A flaw enabling an infinite-loop was discovered in the code for evaluating the cumulative-distribution-function of input data. Although the documentation explains that numeric data is required, some users may confuse an array of strings like ["1","2","3","4","5"] for numeric data [1,2,3,4,5] when it is in fact string data. An infinite loop is possible when the cumulative-distribution-function is evaluated for a given point when the input data is string data rather than type `number`. This vulnerability enables an infinite-cpu-loop denial-of-service-attack on any app using npm:cumulative-distribution-function v1.0.3 or earlier if the attacker can supply malformed data to the library. The vulnerability could also manifest if a data source to be analyzed changes data type from Arrays of number (proper) to Arrays of string (invalid, but undetected by earlier version of the library). Users should upgrade to at least v2.0.0, or the latest version. Tests for several types of invalid data have been created, and version 2.0.0 has been tested to reject this invalid data by throwing a `TypeError()` instead of processing it. Developers using this library may wish to adjust their app's code slightly to better tolerate or handle this TypeError. Apps performing proper numeric data validation before sending data to this library should be mostly unaffected by this patch. The vulnerability can be mitigated in older versions by ensuring that only finite numeric data of type `Array[number]` or `number` is passed to `cumulative-distribution-function` and its `f(x)` function, respectively.

encoding/xml in Go before 1.15.9 and 1.16.x before 1.16.1 has an infinite loop if a custom TokenReader (for xml.NewTokenDecoder) returns EOF in the middle of an element. This can occur in the Decode, DecodeElement, or Skip method.

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus ReadyStart V4 (All versions < V4.1.0), Nucleus Source Code (All versions including affected IPv6 stack). The function that processes the Hop-by-Hop extension header in IPv6 packets and its options lacks any checks against the length field of the header, allowing attackers to put the function into an infinite loop by supplying arbitrary length values.

A vulnerability in Drupal Core allows Excessive Allocation.This issue affects Drupal Core: from 10.2.0 before 10.2.2, from 10.1.0 before 10.1.8.

An improper handing of overflow in the UTF-8 decoder with supplementary characters can lead to an infinite loop in the decoder causing a Denial of Service. Versions Affected: Apache Tomcat 9.0.0.M9 to 9.0.7, 8.5.0 to 8.5.30, 8.0.0.RC1 to 8.0.51, and 7.0.28 to 7.0.86.

The package colors after 1.4.0 are vulnerable to Denial of Service (DoS) that was introduced through an infinite loop in the americanFlag module. Unfortunately this appears to have been a purposeful attempt by a maintainer of colors to make the package unusable, other maintainers' controls over this package appear to have been revoked in an attempt to prevent them from fixing the issue. Vulnerable Code js for (let i = 666; i < Infinity; i++;) { Alternative Remediation Suggested * Pin dependancy to 1.4.0

A flaw was found in FRRouting when parsing certain babeld unicast hello messages that are intended to be ignored. This issue may allow an attacker to send specially crafted hello messages with the unicast flag set, the interval field set to 0, or any TLV that contains a sub-TLV with the Mandatory flag set to enter an infinite loop and cause a denial of service.

DOCSIS dissector crash in Wireshark 4.2.0 allows denial of service via packet injection or crafted capture file

In Wireshark through 3.2.7, the Facebook Zero Protocol (aka FBZERO) dissector could enter an infinite loop. This was addressed in epan/dissectors/packet-fbzero.c by correcting the implementation of offset advancement.

On BIG-IP version 16.0.x before 16.0.1.1 and 15.1.x before 15.1.3, malformed HTTP/2 requests may cause an infinite loop which causes a Denial of Service for Data Plane traffic. TMM takes the configured HA action when the TMM process is aborted. There is no control plane exposure, this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

ModularSquareRoot in Crypto++ (aka cryptopp) through 8.9.0 allows attackers to cause a denial of service (infinite loop) via crafted DER public-key data associated with squared odd numbers, such as the square of 268995137513890432434389773128616504853.

Crash in DNP dissector in Wireshark 3.4.0 to 3.4.6 and 3.2.0 to 3.2.14 allows denial of service via packet injection or crafted capture file

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. In verions prior to 4.6, an attacker can perform a denial-of-service attack by triggering an infinite loop in the processing of IPv6 neighbor solicitation (NS) messages. This type of attack can effectively shut down the operation of the system because of the cooperative scheduling used for the main parts of Contiki-NG and its communication stack. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

An infinite loop in SMLLexer in Pygments versions 1.5 to 2.7.3 may lead to denial of service when performing syntax highlighting of a Standard ML (SML) source file, as demonstrated by input that only contains the "exception" keyword.

An issue was discovered in the http crate before 0.1.20 for Rust. An integer overflow in HeaderMap::reserve() could result in denial of service (e.g., an infinite loop).

picoquic (before 3rd of July 2020) allows attackers to cause a denial of service (infinite loop) via a crafted QUIC frame, related to the picoquic_decode_frames and picoquic_decode_stream_frame functions and epoch==3.

An issue was discovered in picoTCP and picoTCP-NG through 1.7.0. When an unsupported TCP option with zero length is provided in an incoming TCP packet, it is possible to cause a Denial-of-Service by achieving an infinite loop in the code that parses TCP options, aka tcp_parse_options() in pico_tcp.c.

pmm-server in Percona Monitoring and Management (PMM) 2.2.x before 2.2.1 allows unauthenticated denial of service.

GDSDB infinite loop in Wireshark 4.0.0 to 4.0.5 and 3.6.0 to 3.6.13 allows denial of service via packet injection or crafted capture file

Improper detection of complete HTTP body decompression SwiftNIO Extras provides a pair of helpers for transparently decompressing received HTTP request or response bodies. These two objects (HTTPRequestDecompressor and HTTPResponseDecompressor) both failed to detect when the decompressed body was considered complete. If trailing junk data was appended to the HTTP message body, the code would repeatedly attempt to decompress this data and fail. This would lead to an infinite loop making no forward progress, leading to livelock of the system and denial-of-service. This issue can be triggered by any attacker capable of sending a compressed HTTP message. Most commonly this is HTTP servers, as compressed HTTP messages cannot be negotiated for HTTP requests, but it is possible that users have configured decompression for HTTP requests as well. The attack is low effort, and likely to be reached without requiring any privilege or system access. The impact on availability is high: the process immediately becomes unavailable but does not immediately crash, meaning that it is possible for the process to remain in this state until an administrator intervenes or an automated circuit breaker fires. If left unchecked this issue will very slowly exhaust memory resources due to repeated buffer allocation, but the buffers are not written to and so it is possible that the processes will not terminate for quite some time. This risk can be mitigated by removing transparent HTTP message decompression. The issue is fixed by correctly detecting the termination of the compressed body as reported by zlib and refusing to decompress further data. The issue was found by Vojtech Rylko (https://github.com/vojtarylko) and reported publicly on GitHub.

Go before 1.13.15 and 14.x before 1.14.7 can have an infinite read loop in ReadUvarint and ReadVarint in encoding/binary via invalid inputs.

An issue was discovered in picoTCP 1.7.0. The routine for processing the next header field (and deducing whether the IPv6 extension headers are valid) doesn't check whether the header extension length field would overflow. Therefore, if it wraps around to zero, iterating through the extension headers will not increment the current data pointer. This leads to an infinite loop and Denial-of-Service in pico_ipv6_check_headers_sequence() in pico_ipv6.c.

Math/PrimeField.php in phpseclib 3.x before 3.0.19 has an infinite loop with composite primefields.

This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Unified Automation OPC UA C++ Demo Server 1.7.6-537 [with vendor rollup]. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of certificates. A crafted certificate can force the server into an infinite loop. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-17203.

A vulnerability has been identified in Teamcenter V12.4 (All versions < V12.4.0.15), Teamcenter V13.0 (All versions < V13.0.0.10), Teamcenter V13.1 (All versions < V13.1.0.10), Teamcenter V13.2 (All versions < V13.2.0.9), Teamcenter V13.3 (All versions < V13.3.0.5), Teamcenter V14.0 (All versions < V14.0.0.2). File Server Cache service in Teamcenter is vulnerable to denial of service by entering infinite loops and using up CPU cycles. This could allow an attacker to cause denial of service condition.

A CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability exists that could cause a denial of service of the webserver due to improper handling of the cookies. Affected Products: X80 advanced RTU Communication Module (BMENOR2200H) (V1.0), OPC UA Modicon Communication Module (BMENUA0100) (V1.10 and prior)

node-jose is a JavaScript implementation of the JSON Object Signing and Encryption (JOSE) for web browsers and node.js-based servers. Prior to version 2.2.0, when using the non-default "fallback" crypto back-end, ECC operations in `node-jose` can trigger a Denial-of-Service (DoS) condition, due to a possible infinite loop in an internal calculation. For some ECC operations, this condition is triggered randomly; for others, it can be triggered by malicious input. The issue has been patched in version 2.2.0. Since this issue is only present in the "fallback" crypto implementation, it can be avoided by ensuring that either WebCrypto or the Node `crypto` module is available in the JS environment where `node-jose` is being run.

Versions of the package asyncua before 0.9.96 are vulnerable to Denial of Service (DoS) such that an attacker can send a malformed packet and as a result, the server will enter into an infinite loop and consume excessive memory.

In BIG-IP Versions 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5, and all versions of 13.1.x, when an LTM virtual server is configured to perform normalization, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

It is possible to provide data to be read that leads the reader to loop in cycles endlessly, consuming CPU. This issue affects Rust applications using Apache Avro Rust SDK prior to 0.14.0 (previously known as avro-rs). Users should update to apache-avro version 0.14.0 which addresses this issue.

Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. Versions from 0.9.0 to 0.12.0 (including) did not properly fail blocking read operations on TLS connections when the transport hit timeouts. Instead it entered an endless loop retrying the read operation, consuming CPU resources. This could be exploited for denial of service attacks. If trace level logging was enabled, it would also produce an excessive amount of log output during the loop, consuming disk space. The problem has been fixed in commit d7eec4e598158ab6a98bf505354e84352f9715ec, please update to version 0.12.1. There are no workarounds, users who cannot update should apply the errno fix detailed in the security advisory.

In Wireshark 3.2.0 to 3.2.4, the GVCP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-gvcp.c by ensuring that an offset increases in all situations.

An infinite loop in the function httpRpmPass of TP-Link TL-WR741N/TL-WR742N V1/V2/V3_130415 allows attackers to cause a Denial of Service (DoS) via a crafted packet.

Trustwave ModSecurity 3.x through 3.0.4 allows denial of service via a special request. NOTE: The discoverer reports "Trustwave has signaled they are disputing our claims." The CVE suggests that there is a security issue with how ModSecurity handles regular expressions that can result in a Denial of Service condition. The vendor does not consider this as a security issue because1) there is no default configuration issue here. An attacker would need to know that a rule using a potentially problematic regular expression was in place, 2) the attacker would need to know the basic nature of the regular expression itself to exploit any resource issues. It's well known that regular expression usage can be taxing on system resources regardless of the use case. It is up to the administrator to decide on when it is appropriate to trade resources for potential security benefit

An issue was discovered in LibVNCServer before 0.9.13. An improperly closed TCP connection causes an infinite loop in libvncclient/sockets.c.

An issue was discovered in Mattermost Server before 5.23.0. Large webhook requests allow attackers to cause a denial of service (infinite loop), aka MMSA-2020-0021.