IBM Cognos Analytics 11.0, and 11.1 is vulnerable to a denial of service attack that could allow a remote user to send specially crafted requests that would consume all available CPU and memory resources. IBM X-Force ID: 158973.

A flaw was found in Undertow when using Remoting as shipped in Red Hat Jboss EAP before version 7.2.4. A memory leak in HttpOpenListener due to holding remote connections indefinitely may lead to denial of service. Versions before undertow 2.0.25.SP1 and jboss-remoting 5.0.14.SP1 are believed to be vulnerable.

An issue was discovered in xfs_setattr_nonsize in fs/xfs/xfs_iops.c in the Linux kernel through 5.2.9. XFS partially wedges when a chgrp fails on account of being out of disk quota. xfs_setattr_nonsize is failing to unlock the ILOCK after the xfs_qm_vop_chown_reserve call fails. This is primarily a local DoS attack vector, but it might result as well in remote DoS if the XFS filesystem is exported for instance via NFS.

A vulnerability was found in the Undertow HTTP server in versions before 2.0.28.SP1 when listening on HTTPS. An attacker can target the HTTPS port to carry out a Denial Of Service (DOS) to make the service unavailable on SSL.

The trim-newlines package before 3.0.1 and 4.x before 4.0.1 for Node.js has an issue related to regular expression denial-of-service (ReDoS) for the .end() method.

Squid is an open source caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to a Collapse of Data into Unsafe Value bug ,Squid may be vulnerable to a Denial of Service attack against HTTP header parsing. This problem allows a remote client or a remote server to perform Denial of Service when sending oversized headers in HTTP messages. In versions of Squid prior to 6.5 this can be achieved if the request_header_max_size or reply_header_max_size settings are unchanged from the default. In Squid version 6.5 and later, the default setting of these parameters is safe. Squid will emit a critical warning in cache.log if the administrator is setting these parameters to unsafe values. Squid will not at this time prevent these settings from being changed to unsafe values. Users are advised to upgrade to version 6.5. There are no known workarounds for this vulnerability. This issue is also tracked as SQUID-2024:2

Jetty is a Java based web server and servlet engine. An HTTP/2 SSL connection that is established and TCP congested will be leaked when it times out. An attacker can cause many connections to end up in this state, and the server may run out of file descriptors, eventually causing the server to stop accepting new connections from valid clients. The vulnerability is patched in 9.4.54, 10.0.20, 11.0.20, and 12.0.6.

StorageGRID (formerly StorageGRID Webscale) versions prior to 11.6.0.8 are susceptible to a Denial of Service (DoS) vulnerability. A successful exploit could lead to to a crash of the Local Distribution Router (LDR) service.

A vulnerability in Apache Tomcat allows an attacker to remotely trigger a denial of service. An error introduced as part of a change to improve error handling during non-blocking I/O meant that the error flag associated with the Request object was not reset between requests. This meant that once a non-blocking I/O error occurred, all future requests handled by that request object would fail. Users were able to trigger non-blocking I/O errors, e.g. by dropping a connection, thereby creating the possibility of triggering a DoS. Applications that do not use non-blocking I/O are not exposed to this vulnerability. This issue affects Apache Tomcat 10.0.3 to 10.0.4; 9.0.44; 8.5.64.

A vulnerability in the JsonMapObjectReaderWriter of Apache CXF allows an attacker to submit malformed JSON to a web service, which results in the thread getting stuck in an infinite loop, consuming CPU indefinitely. This issue affects Apache CXF versions prior to 3.4.4; Apache CXF versions prior to 3.3.11.

Unlimited memory allocation in redis protocol parser in Apache bRPC (all versions < 1.14.1) on all platforms allows attackers to crash the service via network. Root Cause: In the bRPC Redis protocol parser code, memory for arrays or strings of corresponding sizes is allocated based on the integers read from the network. If the integer read from the network is too large, it may cause a bad alloc error and lead to the program crashing. Attackers can exploit this feature by sending special data packets to the bRPC service to carry out a denial-of-service attack on it. The bRPC 1.14.0 version tried to fix this issue by limited the memory allocation size, however, the limitation checking code is not well implemented that may cause integer overflow and evade such limitation. So the 1.14.0 version is also vulnerable, although the integer range that affect version 1.14.0 is different from that affect version < 1.14.0. Affected scenarios: Using bRPC as a Redis server to provide network services to untrusted clients, or using bRPC as a Redis client to call untrusted Redis services. How to Fix: we provide two methods, you can choose one of them: 1. Upgrade bRPC to version 1.14.1. 2. Apply this patch ( https://github.com/apache/brpc/pull/3050 ) manually. No matter you choose which method, you should note that the patch limits the maximum length of memory allocated for each time in the bRPC Redis parser. The default limit is 64M. If some of you redis request or response have a size larger than 64M, you might encounter error after upgrade. For such case, you can modify the gflag redis_max_allocation_size to set a larger limit.

In Eclipse Jetty 7.2.2 to 9.4.38, 10.0.0.alpha0 to 10.0.1, and 11.0.0.alpha0 to 11.0.1, CPU usage can reach 100% upon receiving a large invalid TLS frame.

Node.js before 10.24.0, 12.21.0, 14.16.0, and 15.10.0 is vulnerable to a denial of service attack when too many connection attempts with an 'unknownProtocol' are established. This leads to a leak of file descriptors. If a file descriptor limit is configured on the system, then the server is unable to accept new connections and prevent the process also from opening, e.g. a file. If no file descriptor limit is configured, then this lead to an excessive memory usage and cause the system to run out of memory.

CXF supports (via JwtRequestCodeFilter) passing OAuth 2 parameters via a JWT token as opposed to query parameters (see: The OAuth 2.0 Authorization Framework: JWT Secured Authorization Request (JAR)). Instead of sending a JWT token as a "request" parameter, the spec also supports specifying a URI from which to retrieve a JWT token from via the "request_uri" parameter. CXF was not validating the "request_uri" parameter (apart from ensuring it uses "https) and was making a REST request to the parameter in the request to retrieve a token. This means that CXF was vulnerable to DDos attacks on the authorization server, as specified in section 10.4.1 of the spec. This issue affects Apache CXF versions prior to 3.4.3; Apache CXF versions prior to 3.3.10.

It was found that when Artemis and HornetQ before 2.4.0 are configured with UDP discovery and JGroups discovery a huge byte array is created when receiving an unexpected multicast message. This may result in a heap memory exhaustion, full GC, or OutOfMemoryError.

The jQuery Validation Plugin provides drop-in validation for your existing forms. It is published as an npm package "jquery-validation". jquery-validation before version 1.19.3 contains one or more regular expressions that are vulnerable to ReDoS (Regular Expression Denial of Service). This is fixed in 1.19.3.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is vulnerability which may allow a remote attacker to allocate 100% CPU time on the target system depending on CPU type or parallel execution of such a payload resulting in a denial of service only by manipulating the processed input stream. No user is affected who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

Schema-Inspector is an open-source tool to sanitize and validate JS objects (npm package schema-inspector). In before version 2.0.0, email address validation is vulnerable to a denial-of-service attack where some input (for example `a@0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.`) will freeze the program or web browser page executing the code. This affects any current schema-inspector users using any version to validate email addresses. Users who do not do email validation, and instead do other types of validation (like string min or max length, etc), are not affected. Users should upgrade to version 2.0.0, which uses a regex expression that isn't vulnerable to ReDoS.

In Apache SpamAssassin before 3.4.3, a message can be crafted in a way to use excessive resources. Upgrading to SA 3.4.3 as soon as possible is the recommended fix but details will not be shared publicly.

In Apache Subversion versions up to and including 1.9.10, 1.10.4, 1.12.0, Subversion's svnserve server process may exit when a client sends certain sequences of protocol commands. This can lead to disruption for users of the server.

The documentation of Apache Tomcat 10.1.0-M1 to 10.1.0-M14, 10.0.0-M1 to 10.0.20, 9.0.13 to 9.0.62 and 8.5.38 to 8.5.78 for the EncryptInterceptor incorrectly stated it enabled Tomcat clustering to run over an untrusted network. This was not correct. While the EncryptInterceptor does provide confidentiality and integrity protection, it does not protect against all risks associated with running over any untrusted network, particularly DoS risks.

An attacker, opening a HTTP/2 connection with an initial window size of 0, was able to block handling of that connection indefinitely in Apache HTTP Server. This could be used to exhaust worker resources in the server, similar to the well known "slow loris" attack pattern. This has been fixed in version 2.4.58, so that such connection are terminated properly after the configured connection timeout. This issue affects Apache HTTP Server: from 2.4.55 through 2.4.57. Users are recommended to upgrade to version 2.4.58, which fixes the issue.

The Security Team noticed that the termination condition of the for loop in the readExternal method is a controllable variable, which, if tampered with, may lead to CPU exhaustion. As a fix, we added an upper bound and termination condition in the read and write logic. We classify it as a "low-priority but useful improvement". SystemDS is a distributed system and needs to serialize/deserialize data but in many code paths (e.g., on Spark broadcast/shuffle or writing to sequence files) the byte stream is anyway protected by additional CRC fingerprints. In this particular case though, the number of decoders is upper-bounded by twice the number of columns, which means an attacker would need to modify two entries in the byte stream in a consistent manner. By adding these checks robustness was strictly improved with almost zero overhead. These code changes are available in versions higher than 2.2.1.

libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.

A regular expression used in Apache MXNet (incubating) is vulnerable to a potential denial-of-service by excessive resource consumption. The bug could be exploited when loading a model in Apache MXNet that has a specially crafted operator name that would cause the regular expression evaluation to use excessive resources to attempt a match. This issue affects Apache MXNet versions prior to 1.9.1.

net/http in Go before 1.16.12 and 1.17.x before 1.17.5 allows uncontrolled memory consumption in the header canonicalization cache via HTTP/2 requests.

A flaw was found in Undertow. A potential security issue in flow control handling by the browser over HTTP/2 may cause overhead or a denial of service in the server. This flaw exists because of an incomplete fix for CVE-2021-3629.

A vulnerability was found in RESTEasy, where RootNode incorrectly caches routes. This issue results in hash flooding, leading to slower requests with higher CPU time spent searching and adding the entry. This flaw allows an attacker to cause a denial of service.

Uncontrolled Resource Consumption vulnerability in Apache Tomcat if an HTTP/2 client did not acknowledge the initial settings frame that reduces the maximum permitted concurrent streams. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.8, from 10.1.0-M1 through 10.1.42, from 9.0.0.M1 through 9.0.106. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 through 8.5.100. Users are recommended to upgrade to version 11.0.9, 10.1.43 or 9.0.107, which fix the issue.

In Apache Thrift 0.9.3 to 0.13.0, malicious RPC clients could send short messages which would result in a large memory allocation, potentially leading to denial of service.

ESI plugin does not have the limit for maximum inclusion depth, and that allows excessive memory consumption if malicious instructions are inserted. Users can use a new setting for the plugin (--max-inclusion-depth) to limit it. This issue affects Apache Traffic Server: from 10.0.0 through 10.0.5, from 9.0.0 through 9.2.10. Users are recommended to upgrade to version 9.2.11 or 10.0.6, which fixes the issue.

The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.

Some HTTP/2 implementations are vulnerable to a flood of empty frames, potentially leading to a denial of service. The attacker sends a stream of frames with an empty payload and without the end-of-stream flag. These frames can be DATA, HEADERS, CONTINUATION and/or PUSH_PROMISE. The peer spends time processing each frame disproportionate to attack bandwidth. This can consume excess CPU.

Some HTTP/2 implementations are vulnerable to a settings flood, potentially leading to a denial of service. The attacker sends a stream of SETTINGS frames to the peer. Since the RFC requires that the peer reply with one acknowledgement per SETTINGS frame, an empty SETTINGS frame is almost equivalent in behavior to a ping. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

Some HTTP/2 implementations are vulnerable to resource loops, potentially leading to a denial of service. The attacker creates multiple request streams and continually shuffles the priority of the streams in a way that causes substantial churn to the priority tree. This can consume excess CPU.

Some HTTP/2 implementations are vulnerable to unconstrained interal data buffering, potentially leading to a denial of service. The attacker opens the HTTP/2 window so the peer can send without constraint; however, they leave the TCP window closed so the peer cannot actually write (many of) the bytes on the wire. The attacker then sends a stream of requests for a large response object. Depending on how the servers queue the responses, this can consume excess memory, CPU, or both.

Some HTTP/2 implementations are vulnerable to ping floods, potentially leading to a denial of service. The attacker sends continual pings to an HTTP/2 peer, causing the peer to build an internal queue of responses. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.

Some HTTP/2 implementations are vulnerable to window size manipulation and stream prioritization manipulation, potentially leading to a denial of service. The attacker requests a large amount of data from a specified resource over multiple streams. They manipulate window size and stream priority to force the server to queue the data in 1-byte chunks. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

Some HTTP/2 implementations are vulnerable to a reset flood, potentially leading to a denial of service. The attacker opens a number of streams and sends an invalid request over each stream that should solicit a stream of RST_STREAM frames from the peer. Depending on how the peer queues the RST_STREAM frames, this can consume excess memory, CPU, or both.

qpid-cpp: ACL policies only loaded if the acl-file option specified enabling DoS by consuming all available file descriptors

A potential denial of service vulnerability is present in versions of Apache CXF before 3.5.10, 3.6.5 and 4.0.6. In some edge cases, the CachedOutputStream instances may not be closed and, if backed by temporary files, may fill up the file system (it applies to servers and clients).

The Bzip2 decompression decoder function doesn't allow setting size restrictions on the decompressed output data (which affects the allocation size used during decompression). All users of Bzip2Decoder are affected. The malicious input can trigger an OOME and so a DoS attack