WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 qos.cgi has no filtering on parameters: qos_bandwith and qos_dat, which leads to command injection in page /qos.shtml.
WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 wireless.cgi has no filtering on parameter hiddenSSID32g and SSID2G2, which leads to command injection in page /wifi_multi_ssid.shtml.
WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 adm.cgi has no filtering on parameters: wlan_signal, web_pskValue, sel_EncrypTyp, sel_Automode, wlan_bssid, wlan_ssid and wlan_channel, which leads to command injection in page /wizard_rep.shtml.
A vulnerability has been found in WAVLINK WN535K2 and WN535K3 and classified as critical. This vulnerability affects unknown code of the file /cgi-bin/nightled.cgi. The manipulation of the argument start_hour leads to os command injection. The exploit has been disclosed to the public and may be used.
A security vulnerability has been detected in Wavlink WL-WN578W2 221110. This affects the function sub_404850 of the file /cgi-bin/wireless.cgi. The manipulation of the argument delete_list leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A remote command-line injection vulnerability in the /cgi-bin/live_api.cgi endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allows an attacker to execute arbitrary Linux commands as root without authentication.
A command injection vulnerability in the API of the Wavlink WL-WN531P3 router, version M31G3.V5030.201204, allows an attacker to achieve unauthorized remote code execution via a malicious POST request through /cgi-bin/adm.cgi.
WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 firewall.cgi has no filtering on parameters: remoteManagementEnabled, blockPortScanEnabled, pingFrmWANFilterEnabled and blockSynFloodEnabled, which leads to command injection in page /man_security.shtml.
A vulnerability classified as critical has been found in Wavlink WN579X3 up to 20230615. Affected is an unknown function of the file /cgi-bin/adm.cgi of the component Ping Test. The manipulation of the argument pingIp leads to injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-232236. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Hidden functionality issue exists in BUFFALO Wi-Fi router products, which may allow an attacker to gain access to the product’s debugging functionality, resulting in the execution of arbitrary OS commands.
An additional, nondocumented administrative account exists in mySCADA myPRO Versions 8.20.0 and prior that is not exposed through the web interface, which cannot be deleted or changed through the regular web interface.
A hidden, persistent backdoor was found in Yarbo firmware v2.3.9 that provides remote, unauthenticated (or weakly authenticated) access to privileged functionality. The backdoor is undocumented, cannot be disabled via user-facing settings, and survives factory reset and ordinary firmware updates.
MvcTools 6d48cd6830fc1df1d8c9d61caa1805fd6a1b7737 was discovered to contain a code execution backdoor via the request package (requirements.txt). This vulnerability allows attackers to access sensitive user information and execute arbitrary code.
MinMax CMS from MinMax Digital Technology contains a hidden administrator account with a fixed password that cannot be removed or disabled from the management interface. Remote attackers who obtain this account can bypass IP access control restrictions and log in to the backend system without being recorded in the system logs.
Certain models of D-Link wireless routers have a hidden functionality where the telnet service is enabled when the WAN port is plugged in. Unauthorized remote attackers can log in and execute OS commands using hard-coded credentials.
vSphere_selfuse commit 2a9fe074a64f6a0dd8ac02f21e2f10d66cac5749 was discovered to contain a code execution backdoor via the request package. This vulnerability allows attackers to access sensitive user information and digital currency keys, as well as escalate privileges.
On ORing net IAP-420(+) with FW version 2.0m a telnet server is enabled by default and cannot permanently be disabled. You can connect to the device via LAN or WiFi with hardcoded credentials and get an administrative shell. These credentials are reset to defaults with every reboot.
A malicious backdoor was embedded in the official ProFTPD 1.3.3c source tarball distributed between November 28 and December 2, 2010. The backdoor implements a hidden FTP command trigger that, when invoked, causes the server to execute arbitrary shell commands with root privileges. This allows remote, unauthenticated attackers to run any OS command on the FTP server host.
Hidden Functionality vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary OS command with the root privilege via the internet
Snap One WattBox 800 and 820 series firmware versions prior to 2.10.0.0 contain undisclosed diagnostic HTTP endpoints that require only the device MAC address and service tag for authentication, both of which are printed in plaintext on the physical device label. Attackers with access to the device label or documentation containing these values can authenticate to the several endpoints and execute arbitrary commands as root on the device.
An unauthenticated remote attacker can exploit a hidden function in the CLI prompt to escape the restricted interface, leading to full compromise of the device.
A vulnerability in Cisco Smart Licensing Utility (CSLU) could allow an unauthenticated, remote attacker to log into an affected system by using a static administrative credential. This vulnerability is due to an undocumented static user credential for an administrative account. An attacker could exploit this vulnerability by using the static credentials to login to the affected system. A successful exploit could allow the attacker to login to the affected system with administrative rights over the CSLU application API.
Delta Electronics AS320T has denial of service via the undocumented subfunction vulnerability.
The affected product is vulnerable due to an undocumented interface found on the device, which may allow an attacker to execute commands as root on the device on the N-Tron 702-W / 702M12-W (all versions).
OpenClinic GA 5.09.02 contains a hidden default user account that may be accessed if an administrator has not expressly turned off this account, which may allow an attacker to login and execute arbitrary commands.
Improper Authorization vulnerability of Pepperl+Fuchs P+F Comtrol RocketLinx ES7510-XT, ES8509-XT, ES8510-XT, ES9528-XTv2, ES7506, ES7510, ES7528, ES8508, ES8508F, ES8510, ES8510-XTE, ES9528/ES9528-XT (all versions) and ICRL-M-8RJ45/4SFP-G-DIN, ICRL-M-16RJ45/4CP-G-DIN FW 1.2.3 and below has an active TFTP-Service.
A backdoor in Solar-Log Gateway products allows remote access via web panel gaining super administration privileges to the attacker. This affects Solar-Log devices that use firmware version v4.2.7 up to v5.1.1 (included). This does not exist in SL 200, 500, 1000 / fixed in 4.2.8 for SL 250, 300, 1200, 2000, SL 50 Gateway / fixed in 5.1.2 / 6.0.0 for SL Base.
Passhunt commit 54eb987d30ead2b8ebbf1f0b880aa14249323867 was discovered to contain a code execution backdoor via the request package. This vulnerability allows attackers to access sensitive user information and digital currency keys, as well as escalate privileges.
myBB version 1.6.4 was distributed with an unauthorized backdoor embedded in the source code. The backdoor allowed remote attackers to execute arbitrary PHP code by injecting payloads into a specially crafted collapsed cookie. This vulnerability was introduced during packaging and was not part of the intended application logic. Exploitation requires no authentication and results in full compromise of the web server under the context of the web application.
Numerous Plugins and Themes from the AccessPress Themes (aka Access Keys) vendor are backdoored due to their website being compromised. Only plugins and themes downloaded via the vendor website are affected, and those hosted on wordpress.org are not. However, all of them were updated or removed to avoid any confusion