Improper input validation in the Intel(R) SUR software before version 2.4.8902 may allow an unauthenticated user to potentially enable escalation of privilege via network access.

An improper input validation vulnerability has been found in Lanaccess ONSAFE MonitorHM affecting version 3.7.0. This vulnerability could lead a remote attacker to exploit the checkbox element and perform remote code execution, compromising the entire infrastructure.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. imap/command.c mishandles a long IMAP status mailbox literal count size.

Duplicate of CVE-2024-45806.

thttpd 2.25b0 writes data to a log file without sanitizing non-printable characters, which might allow remote attackers to modify a window's title, or possibly execute arbitrary commands or overwrite files, via an HTTP request containing an escape sequence for a terminal emulator.

memory corruption in modem due to improper check while calculating size of serialized CoAP message

Codiad through 2.8.4 allows Remote Code Execution, a different vulnerability than CVE-2017-11366 and CVE-2017-15689.

The Bosch Ethernet switch PRA-ES8P2S with software version 1.01.05 and earlier was found to be vulnerable to command injection through its diagnostics web interface. This allows execution of shell commands.

The Struts 1 plugin in Apache Struts 2.1.x and 2.3.x might allow remote code execution via a malicious field value passed in a raw message to the ActionMessage.

Chat Server is the chat server for Vartalap, an open-source messaging application. Versions 2.3.2 until 2.6.0 suffer from a bug in validating the access token, resulting in authentication bypass. The function `this.authProvider.verifyAccessKey` is an async function, as the code is not using `await` to wait for the verification result. Every time the function responds back with success, along with an unhandled exception if the token is invalid. A patch is available in version 2.6.0.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

The implementation of backslash parsing in the Dart URI class for versions prior to 2.18 and Flutter versions prior to 3.30 differs from the WhatWG URL standards. Dart uses the RFC 3986 syntax, which creates incompatibilities with the '\' characters in URIs, which can lead to auth bypass in webapps interpreting URIs. We recommend updating Dart or Flutter to mitigate the issue.

pretix before 2024.1.1 mishandles file validation.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability has been identified in SIMATIC IPC1047E (All versions with maxView Storage Manager < V4.14.00.26068 on Windows), SIMATIC IPC647E (All versions with maxView Storage Manager < V4.14.00.26068 on Windows), SIMATIC IPC847E (All versions with maxView Storage Manager < V4.14.00.26068 on Windows). In default installations of maxView Storage Manager where Redfish® server is configured for remote system management, a vulnerability has been identified that can provide unauthorized access.

Improper input validation together with an integer overflow in the EAP-TLS protocol implementation in PPPD may cause a crash, information disclosure, or authentication bypass. This implementation is distributed as a patch for PPPD 0.91, and includes the affected eap.c and eap-tls.c files. Configurations that use the `refuse-app` option are unaffected.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability was found in yanyutao0402 ChanCMS up to 3.1.2. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /collect/getArticle. The manipulation of the argument taskUrl leads to deserialization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.1.3 is able to address this issue. The patch is named 33d9bb464353015aaaba84e27638ac9a3912795d. It is recommended to upgrade the affected component.

klaussilveira GitList version <= 0.6 contains a Passing incorrectly sanitized input to system function vulnerability in `searchTree` function that can result in Execute any code as PHP user. This attack appear to be exploitable via Send POST request using search form. This vulnerability appears to have been fixed in 0.7 after commit 87b8c26b023c3fc37f0796b14bb13710f397b322.

In Realtek eCos RSDK 1.5.7p1 and MSDK 4.9.4p1, the SIP ALG function that rewrites SDP data has a stack-based buffer overflow. This allows an attacker to remotely execute code without authentication via a crafted SIP packet that contains malicious SDP data.

tcpdump before 4.9.3 mishandles the printing of SMB data (issue 1 of 2).

In attp_build_read_by_type_value_cmd of att_protocol.cc , there is a possible out of bounds write due to improper input validation. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

tj-actions/branch-names is a Github action to retrieve branch or tag names with support for all events. The `tj-actions/branch-names` GitHub Actions improperly references the `github.event.pull_request.head.ref` and `github.head_ref` context variables within a GitHub Actions `run` step. The head ref variable is the branch name and can be used to execute arbitrary code using a specially crafted branch name. As a result an attacker can use this vulnerability to steal secrets from or abuse `GITHUB_TOKEN` permissions. This vulnerability has been addressed in version 7.0.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An issue was discovered on Askey AP4000W TDC_V1.01.003 devices. An attacker can perform Remote Code Execution (RCE) by sending a specially crafted network packer to the bd_svr service listening on TCP port 54188.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. imap/command.c mishandles a NO response without a message.

A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition, or to execute arbitrary code on an affected device. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted Smart Install message to an affected device on TCP port 4786. A successful exploit could allow the attacker to cause a buffer overflow on the affected device, which could have the following impacts: Triggering a reload of the device, Allowing the attacker to execute arbitrary code on the device, Causing an indefinite loop on the affected device that triggers a watchdog crash. Cisco Bug IDs: CSCvg76186.

A vulnerability in the web interface of the Cisco RV132W ADSL2+ Wireless-N VPN and RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to an incomplete input validation on user-controlled input in an HTTP request to the targeted device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user and gain full control of the affected system or cause it to reload, resulting in a DoS condition. This vulnerability is fixed in firmware version 1.0.1.11 for the following Cisco products: RV132W ADSL2+ Wireless-N VPN Router and RV134W VDSL2 Wireless-AC VPN Router. Cisco Bug IDs: CSCvg92737, CSCvh60170.

A vulnerability in Java deserialization used by Cisco Secure Access Control System (ACS) prior to release 5.8 patch 9 could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a crafted serialized Java object. An exploit could allow the attacker to execute arbitrary commands on the device with root privileges. Cisco Bug IDs: CSCvh25988.

In OSSEC-HIDS 2.7 through 3.5.0, the OS_CleanMSG function in ossec-analysisd doesn't remove or encode terminal control characters or newlines from processed log messages. In many cases, those characters are later logged. Because newlines (\n) are permitted in messages processed by ossec-analysisd, it may be possible to inject nested events into the ossec log. Use of terminal control characters may allow obfuscating events or executing commands when viewed through vulnerable terminal emulators. This may be an unauthenticated remote attack for certain types and origins of logged data.

SAPCAR - version 7.22, does not contain sufficient input validation on the SAPCAR archive. As a result, the SAPCAR process may crash, and the attacker may obtain privileged access to the system.

An authorization bypass and PHP local-file-include vulnerability in the installation component of SugarCRM before 8.0, 8.0 before 8.0.7, 9.0 before 9.0.4, and 10.0 before 10.0.0 allows for unauthenticated remote code execution against a configured SugarCRM instance via crafted HTTP requests. (This is exploitable even after installation is completed.).

SMC Networks D3G0804W D3GNV5M-3.5.1.6.10_GA devices allow remote command execution by leveraging access to the Network Diagnostic Tools screen, as demonstrated by an admin login. The attacker must use a Parameter Pollution approach against goform/formSetDiagnosticToolsFmPing by providing the vlu_diagnostic_tools__ping_address parameter twice: once with a shell metacharacter and a command name, and once with a command argument.

A vulnerability of Helpcom could allow an unauthenticated attacker to execute arbitrary command. This vulnerability exists due to insufficient validation of the parameter. This issue affects: Cnesty Helpcom 10.0 versions prior to.

npm-programmatic through 0.0.12 is vulnerable to Command Injection.The packages and option properties are concatenated together without any validation and are used by the 'exec' function directly.

A vulnerability (improper input validation) in the DEXT5 Upload solution allows an unauthenticated attacker to download and execute an arbitrary file via AddUploadFile, SetSelectItem, DoOpenFile function.(CVE-2020-7832)

RAONWIZ v2018.0.2.50 and eariler versions contains a vulnerability that could allow remote files to be downloaded and excuted by lack of validation to file extension, witch can used as remote-code-excution attacks by hackers File download & execution vulnerability in ____COMPONENT____ of RAONWIZ RAON KUpload allows ____ATTACKER/ATTACK____ to cause ____IMPACT____. This issue affects: RAONWIZ RAON KUpload 2018.0.2.50 versions prior to 2018.0.2.51 on Windows.

In MaEPSBroker 2.5.0.31 and prior, a command injection vulnerability caused by improper input validation checks when parsing brokerCommand parameter.

When using XPLATFORM 9.2.2.270 or earlier versions ActiveX component, arbitrary commands can be executed due to improper input validation

In FreeBSD 12.1-STABLE before r360971, 12.1-RELEASE before p5, 11.4-STABLE before r360971, 11.4-BETA1 before p1 and 11.3-RELEASE before p9, libalias does not properly validate packet length resulting in modules causing an out of bounds read/write condition if no checking was built into the module.

A vulnerability classified as critical was found in Metasoft 美特软件 MetaCRM up to 6.4.2. This vulnerability affects the function AnalyzeParam of the file download.jsp. The manipulation of the argument p leads to deserialization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Flaw in input validation in npm package utils-extend version 1.0.8 and earlier may allow prototype pollution attack that may result in remote code execution or denial of service of applications using utils-extend.

Nexacro14/17 ExtCommonApiV13 Library under 2019.9.6 version contain a vulnerability that could allow remote attacker to execute arbitrary code by modifying the value of registry path. This can be leveraged for code execution by rebooting the victim’s PC

Trend Micro ServerProtect for Linux 3.0 before CP 1531 allows attackers to write to arbitrary files and consequently execute arbitrary code with root privileges by leveraging failure to validate software updates.

Ballcat Codegen provides the function of online editing code to generate templates. In versions prior to 1.0.0.beta.2, attackers can implement remote code execution through malicious code injection of the template engine. This happens because Velocity and freemarker templates are introduced but input verification is not done. The fault is rectified in version 1.0.0.beta.2.

The Service Appliance component in Mitel MiVoice Connect through 19.2 SP3 allows remote code execution because of incorrect data validation. The Service Appliances are SA 100, SA 400, and Virtual SA.