hutool v5.8.21 was discovered to contain a buffer overflow via the component JSONUtil.parse().
Vulnerability exists in SCI IEC 60870-5-104 and HCI IEC 60870-5-104 that affects the RTU500 series product versions listed below. Specially crafted messages sent to the mentioned components are not validated properly and can result in buffer overflow and as final consequence to a reboot of an RTU500 CMU.
OpenAirInterface Version 2.2.0 has a Buffer Overflow vulnerability in processing UplinkNASTransport containing Authentication Response containing a NAS PDU with oversize response (For example 100 byte). The response is decoded by AMF and passed to the AUSF component for verification. AUSF crashes on receiving this oversize response. This can prohibit users from further registration and verification and can cause Denial of Services (DoS).
A buffer overflow was addressed with improved bounds checking. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. An app may be able to cause unexpected system termination.
GOST engine is a reference implementation of the Russian GOST crypto algorithms for OpenSSL. TLS clients using GOST engine when ciphersuite `TLS_GOSTR341112_256_WITH_KUZNYECHIK_CTR_OMAC` is agreed and the server uses 512 bit GOST secret keys are vulnerable to buffer overflow. GOST engine version 3.0.1 contains a patch for this issue. Disabling ciphersuite `TLS_GOSTR341112_256_WITH_KUZNYECHIK_CTR_OMAC` is a possible workaround.
Tenda TX9 Pro V22.03.02.10 is vulnerable to Buffer Overflow via the functtion setIPv6Status() in httpd module.
Buffer Overflow vulnerability in the nomath() function in Mathtex v.1.05 and before allows a remote attacker to cause a denial of service via a crafted string in the application URL.
Buffer Overflow vulnerability in Tenda i29 versions 1.0 V1.0.0.5 and 1.0 V1.0.0.2, allows remote attackers to cause a denial of service (DoS) via the pingIp parameter in the pingSet function.
A buffer overflow in websockets in UnrealIRCd 6.1.0 through 6.1.3 before 6.1.4 allows an unauthenticated remote attacker to crash the server by sending an oversized packet (if a websocket port is open). Remote code execution might be possible on some uncommon, older platforms.
ClickHouse is an open-source column-oriented database management system that allows generating analytical data reports in real-time. A heap buffer overflow issue was discovered in ClickHouse server. An attacker could send a specially crafted payload to the native interface exposed by default on port 9000/tcp, triggering a bug in the decompression logic of Gorilla codec that crashes the ClickHouse server process. This attack does not require authentication. This issue has been addressed in ClickHouse Cloud version 23.9.2.47551 and ClickHouse versions 23.10.5.20, 23.3.18.15, 23.8.8.20, and 23.9.6.20.
Buffer Overflow vulnerability in free5gc 3.3.0 allows attackers to cause a denial of service via crafted PFCP message with malformed PFCP Heartbeat message whose Recovery Time Stamp IE length is mutated to zero.
Squid is vulnerable to a Denial of Service, where a remote attacker can perform buffer overflow attack by writing up to 2 MB of arbitrary data to heap memory when Squid is configured to accept HTTP Digest Authentication.
A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an out of bounds write past the end of an allocated buffer when handling specific requests on port 4002/tcp. This could allow an attacker to crash the application. The corresponding service is auto-restarted after the crash.
A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an out of bounds write past the end of an allocated buffer when handling specific requests on port 4002/tcp and 4004/tcp. This could allow an attacker to crash the application. The corresponding service is auto-restarted after the crash.
An issue was discovered in Tenda W20E V4.0br_V15.11.0.6. Failure to validate `pPortMapIndex` may lead to buffer overflows when using `strcpy`.
nginx njs 0.7.2 is vulnerable to Buffer Overflow. Type confused in Array.prototype.concat() when a slow array appended element is fast array.
engine.c in slaacd in OpenBSD 6.9 and 7.0 before 2022-02-21 has a buffer overflow triggerable by an IPv6 router advertisement with more than seven nameservers. NOTE: privilege separation and pledge can prevent exploitation.
An issue was discovered in Tenda W20E V4.0br_V15.11.0.6. Attackers may exploit the vulnerability by specifying the value of `userInfo`. When `userInfo` is passed into the `addWewifiWhiteUser` function and processed by `sscanf` without size validation, it could lead to a buffer overflow vulnerability.
D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the SSID parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the GuardInt parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Password parameter in the SetWanSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the CurrentPassword parameter in the CheckPasswdSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the EndTime parameter in the SetParentsControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
Tenda RX3 US_RX3V1.0br_V16.03.13.11_multi_TDE01 is vulnerable to Buffer Overflow via the list parameter at /goform/SetVirtualServerCfg. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.
** UNSUPPORTED WHEN ASSIGNED **The buffer overflow vulnerability in the Zyxel PMG2005-T20B firmware version V1.00(ABNK.2)b11_C0 could allow an unauthenticated attacker to cause a denial of service condition via a crafted uid.
Buffer Overflow vulnerability in O-RAN Software Community ric-plt-lib-rmr v.4.9.0 allows a remote attacker to cause a denial of service via the packet size component.
MariaDB Server v10.7 and below was discovered to contain a global buffer overflow in the component decimal_bin_size, which is exploited via specially crafted SQL statements.
DoS vulnerability in the PMS module. Successful exploitation of this vulnerability may cause the system to restart.
Buffer Overflow vulnerability in hzeller timg v.1.5.1 and before allows a remote attacker to cause a denial of service via the 0x61200000045c address.
A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the GET parameter XNo of incoming HTTP requests. This could allow an unauthenticated remote attacker to crash affected devices.
Tenda RX3 US_RX3V1.0br_V16.03.13.11_multi_TDE01 is vulnerable to Buffer Overflow via the list parameter at /goform/setPptpUserList. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.
An issue was discovered in Samsung Mobile Processor, Wearable Processor, Automotive Processor, and Modem (Exynos 9810, 9610, 9820, 980, 850, 1080, 2100, 2200, 1280, 1380, 1330, 9110, W920, Modem 5123, Modem 5300, and Auto T5123). A buffer copy, without checking the size of the input, can cause abnormal termination of a mobile phone. This occurs in the RLC task and RLC module.
A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.
stb_truetype.h v1.26 was discovered to contain a heap-buffer-overflow via the function ttUSHORT() at stb_truetype.h. NOTE: Third party has disputed stating that the source code has also a disclaimer that it should only be used with trusted input.
Buffer Overflow vulnerability in O-RAN Software Community ric-plt-lib-rmr v.4.9.0 allows a remote attacker to cause a denial of service via a crafted packet.
FreeRDP is a free implementation of the Remote Desktop Protocol (RDP), released under the Apache license. In affected versions there is a Global-Buffer-Overflow in the ncrush_decompress function. Feeding crafted input into this function can trigger the overflow which has only been shown to cause a crash. This issue has been addressed in versions 2.11.0 and 3.0.0-beta3. Users are advised to upgrade. There are no known workarounds for this issue.
Tenda RX3 US_RX3V1.0br_V16.03.13.11_multi_TDE01 is vulnerable to Buffer Overflow via the time and timeZone parameters at /goform/SetSysTimeCfg. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.
Tenda W6_S v1.0.0.4_510 has a Buffer Overflow vulnerability in the set_local_time function, which allows remote attackers to cause web server crash via parameter time passed to the binary through a POST request.
Tenda RX3 US_RX3V1.0br_V16.03.13.11_multi_TDE01 is vulnerable to Buffer Overflow via the firewallEn parameter at /goform/SetFirewallCfg. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.
TP-Link TL-WR940N V2, TP-Link TL-WR941ND V5 and TP-Link TL-WR841N V8 were discovered to contain a buffer overflow via the component /userRpm/AccessCtrlAccessRulesRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.
Tenda AC10-1200 v15.03.06.23_EN was discovered to contain a buffer overflow in the setSmartPowerManagement function.
DoS vulnerability in the PMS module. Successful exploitation of this vulnerability may cause the system to restart.
Vulnerability of input parameters being not strictly verified in the PMS module. Successful exploitation of this vulnerability may cause newly installed apps to fail to restart.
Buffer overflow in some Zoom clients may allow an unauthenticated user to conduct a denial of service via network access.
A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.
Buffer Overflow vulnerability in NBD80S09S-KLC v.YK_HZXM_NBD80S09S-KLC_V4.03.R11.7601.Nat.OnvifC.20230414.bin and NBD80N32RA-KL-V3 v.YK_HZXM_NBD80N32RA-KL_V4.03.R11.7601.Nat.OnvifC.20220120.bin allows a remote attacker to casue a denial of service via a crafted request to the service.XM component.
Vulnerability of input parameters being not strictly verified in the PMS module. Successful exploitation of this vulnerability may cause home screen unavailability.
An issue was discovered in WinAPRS 2.9.0. A buffer overflow in DIGI address processing for VHF KISS packets allows a remote attacker to cause a denial of service (daemon crash) via a malicious AX.25 packet over the air. NOTE: This vulnerability only affects products that are no longer supported by the maintainer
* Buffer Overflow vulnerability in qdrant v.1.3.2 allows a remote attacker cause a denial of service via the chucnked_vectors.rs component.
PJSIP is a free and open source multimedia communication library written in C. Versions 2.12 and prior contain a stack buffer overflow vulnerability that affects PJSUA2 users or users that call the API `pjmedia_sdp_print(), pjmedia_sdp_media_print()`. Applications that do not use PJSUA2 and do not directly call `pjmedia_sdp_print()` or `pjmedia_sdp_media_print()` should not be affected. A patch is available on the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.