Tolgee is an open-source localization platform. Tolgee 3.81.1 included the all configuration properties in the PublicConfiguratioDTO publicly exposed to users. This vulnerability is fixed in v3.81.2.

Emerson Dixell XWEB-500 products are affected by arbitrary file write vulnerability in /cgi-bin/logo_extra_upload.cgi, /cgi-bin/cal_save.cgi, and /cgi-bin/lo_utils.cgi. An attacker will be able to write any file on the target system without any kind of authentication mechanism, and this can lead to denial of service and potentially remote code execution. Note: the product has not been supported since 2018 and should be removed or replaced

An Information Exposure issue was discovered in Schneider Electric Wonderware InTouch Access Anywhere, version 11.5.2 and prior. Credentials may be exposed to external systems via specific URL parameters, as arbitrary destination addresses may be specified.

Elcomplus SmartPTT SCADA Server is vulnerable to an unauthenticated user can request various files from the server without any authentication or authorization.

A vulnerability reported in Lenovo Solution Center version 03.12.003, which is no longer supported, could allow log files to be written to non-standard locations, potentially leading to privilege escalation. Lenovo ended support for Lenovo Solution Center and recommended that customers migrate to Lenovo Vantage or Lenovo Diagnostics in April 2018.

CubeFS is an open-source cloud-native file storage system. A vulnerability was found in CubeFS prior to version 3.3.1 that could allow users to read sensitive data from the logs which could allow them escalate privileges. CubeFS leaks configuration keys in plaintext format in the logs. These keys could allow anyone to carry out operations on blobs that they otherwise do not have permissions for. For example, an attacker that has succesfully retrieved a secret key from the logs can delete blogs from the blob store. The attacker can either be an internal user with limited privileges to read the log, or they can be an external user who has escalated privileges sufficiently to access the logs. The vulnerability has been patched in v3.3.1. There is no other mitigation than upgrading.

ECOA BAS controller is vulnerable to configuration disclosure when direct object reference is made to the specific files using an HTTP GET request. This will enable the unauthenticated attacker to remotely disclose sensitive information and help her in authentication bypass, privilege escalation and full system access.

A vulnerability in Brocade SANnav exposes Kafka in the wan interface. The vulnerability could allow an unauthenticated attacker to perform various attacks, including DOS against the Brocade SANnav.

There are vulnerabilities in the Soft AP Daemon Service which could allow a threat actor to execute an unauthenticated RCE attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.

An issue in wishnet Nepstech Wifi Router NTPL-XPON1GFEVN v1.0 allows a remote attacker to obtain sensitive information via the cookie's parameter

A flaw in netfilter could allow a network-connected attacker to infer openvpn connection endpoint information for further use in traditional network attacks.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Membership Software WishList Member X.This issue affects WishList Member X: from n/a before 3.26.7.

Certain Anpviz products allow unauthenticated users to download arbitrary files from the device's filesystem via a HTTP GET request to the /playback/ URI. This affects IPC-D250, IPC-D260, IPC-B850, IPC-D850, IPC-D350, IPC-D3150, IPC-D4250, IPC-D380, IPC-D880, IPC-D280, IPC-D3180, MC800N, YM500L, YM800N_N2, YMF50B, YM800SV2, YM500L8, and YM200E10 (IP Cameras) firmware v3.2.2.2 and lower and possibly more vendors/models of IP camera.

The sensitive information of webcam device is not properly protected. Remote attackers can unauthentically grant administrator’s credential and further control the devices.

A critical unauthenticated remote code execution vulnerability was found all recent versions of Apache Tapestry. The affected versions include 5.4.5, 5.5.0, 5.6.2 and 5.7.0. The vulnerability I have found is a bypass of the fix for CVE-2019-0195. Recap: Before the fix of CVE-2019-0195 it was possible to download arbitrary class files from the classpath by providing a crafted asset file URL. An attacker was able to download the file `AppModule.class` by requesting the URL `http://localhost:8080/assets/something/services/AppModule.class` which contains a HMAC secret key. The fix for that bug was a blacklist filter that checks if the URL ends with `.class`, `.properties` or `.xml`. Bypass: Unfortunately, the blacklist solution can simply be bypassed by appending a `/` at the end of the URL: `http://localhost:8080/assets/something/services/AppModule.class/` The slash is stripped after the blacklist check and the file `AppModule.class` is loaded into the response. This class usually contains the HMAC secret key which is used to sign serialized Java objects. With the knowledge of that key an attacker can sign a Java gadget chain that leads to RCE (e.g. CommonsBeanUtils1 from ysoserial). Solution for this vulnerability: * For Apache Tapestry 5.4.0 to 5.6.1, upgrade to 5.6.2 or later. * For Apache Tapestry 5.7.0, upgrade to 5.7.1 or later.

An unauthenticated Insecure Direct Object Reference (IDOR) to the database has been found in the SO Planning tool that occurs when the public view setting is enabled. An attacker could use this vulnerability to gain access to the underlying database by exporting it as a CSV file. The vulnerability has been remediated in version 1.52.02.

CasaOS-UserService provides user management functionalities to CasaOS. Prior to version 0.4.7, path filtering of the URL for user avatar image files was not strict, making it possible to get any file on the system. This could allow an unauthorized actor to access, for example, the CasaOS user database, and possibly obtain system root privileges. Version 0.4.7 fixes this issue.

open-irs is an issue response robot that reponds to issues in the installed repository. The `.env` file was accidentally uploaded when working with git actions. This problem is fixed in 1.0.1. Discontinuing all sensitive keys and turning into secrets.

Multiple unspecified vulnerabilities in Adobe Reader and Acrobat before 8.1.2 have unknown impact and attack vectors.

Label Studio is a multi-type data labeling and annotation tool with standardized output format. There is a vulnerability that can be chained within the ORM Leak vulnerability to impersonate any account on Label Studio. An attacker could exploit these vulnerabilities to escalate their privileges from a low privilege user to a Django Super Administrator user. The vulnerability was found to affect versions before `1.8.2`, where a patch was introduced.

The CE21 Suite plugin for WordPress is vulnerable to sensitive information disclosure via the plugin-log.txt in versions up to, and including, 2.2.0. This makes it possible for unauthenticated attackers to log in the user associated with the JWT token.

For ABB products ABB Ability™ System 800xA and related system extensions versions 5.1, 6.0 and 6.1, Compact HMI versions 5.1 and 6.0, Control Builder Safe 1.0, 1.1 and 2.0, Symphony Plus -S+ Operations 3.0 to 3.2 Symphony Plus -S+ Engineering 1.1 to 2.2, Composer Harmony 5.1, 6.0 and 6.1, Melody Composer 5.3, 6.1/6.2 and SPE for Melody 1.0SPx (Composer 6.3), Harmony OPC Server (HAOPC) Standalone 6.0, 6.1 and 7.0, ABB Ability™ System 800xA/ Advant® OCS Control Builder A 1.3 and 1.4, Advant® OCS AC100 OPC Server 5.1, 6.0 and 6.1, Composer CTK 6.1 and 6.2, AdvaBuild 3.7 SP1 and SP2, OPCServer for MOD 300 (non-800xA) 1.4, OPC Data Link 2.1 and 2.2, Knowledge Manager 8.0, 9.0 and 9.1, Manufacturing Operations Management 1812 and 1909, confidential data is written in an unprotected file. An attacker who successfully exploited this vulnerability could take full control of the computer.

Under certain circumstances IQ Panel4 and IQ4 Hub panel software prior to version 4.4.2 could allow unauthorized access to settings.

NETGEAR RAX40 devices before 1.0.3.64 are affected by disclosure of administrative credentials.

The Syrus4 IoT gateway utilizes an unsecured MQTT server to download and execute arbitrary commands, allowing a remote unauthenticated attacker to execute code on any Syrus4 device connected to the cloud service. The MQTT server also leaks the location, video and diagnostic data from each connected device. An attacker who knows the IP address of the server is able to connect and perform the following operations: * Get location data of the vehicle the device is connected to * Send CAN bus messages via the ECU module ( https://syrus.digitalcomtech.com/docs/ecu-1 https://syrus.digitalcomtech.com/docs/ecu-1 ) * Immobilize the vehicle via the safe-immobilizer module ( https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization ) * Get live video through the connected video camera * Send audio messages to the driver ( https://syrus.digitalcomtech.com/docs/system-tools#apx-tts https://syrus.digitalcomtech.com/docs/system-tools#apx-tts )

A vulnerability in the “plug-and-play” services component of Cisco Industrial Network Director (IND) could allow an unauthenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to improper access restrictions on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to access running configuration information about devices managed by the IND, including administrative credentials.

Advantech R-SeeNet v2.4.23 allows an unauthenticated remote attacker to read from and write to the snmpmon.ini file, which contains sensitive information.

AdRem NetCrunch 10.6.0.4587 has an Improper Session Handling vulnerability in the NetCrunch web client, which can lead to an authentication bypass or escalation of privileges.

A vulnerability in Veeam ONE allows an unauthenticated user to gain information about the SQL server connection Veeam ONE uses to access its configuration database. This may lead to remote code execution on the SQL server hosting the Veeam ONE configuration database.

A flaw was discovered in FasterXML jackson-databind in all versions before 2.9.10 and 2.10.0, where it would permit polymorphic deserialization of malicious objects using the xalan JNDI gadget when used in conjunction with polymorphic type handling methods such as `enableDefaultTyping()` or when @JsonTypeInfo is using `Id.CLASS` or `Id.MINIMAL_CLASS` or in any other way which ObjectMapper.readValue might instantiate objects from unsafe sources. An attacker could use this flaw to execute arbitrary code.

Password disclosure in the web interface on socomec DIRIS A-40 devices before 48250501 allows a remote attacker to get full access to a device via the /password.jsn URI.

In Gradle Enterprise before 2018.5.2, Build Cache Nodes would reflect the configured password back when viewing the HTML page source of the settings page.

A vulnerability of remote credential disclosure was discovered in Advan VD-1 firmware versions up to 230. An attacker can export system configuration which is not encrypted to get the administrator’s account and password in plain text via cgibin/ExportSettings.cgi?Export=1 without any authentication.

CWE-200: Exposure of Sensitive Information to an Unauthorized Actor vulnerability exists that could cause exposure of credentials when attacker has access to application on network over http

A vulnerability was found in yanyutao0402 ChanCMS up to 3.1.2. It has been classified as problematic. Affected is an unknown function of the file /sysApp/find. The manipulation of the argument accessKey/secretKey leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.1.3 is able to address this issue. It is recommended to upgrade the affected component.

A flaw was discovered in jackson-databind in versions before 2.9.10, 2.8.11.5 and 2.6.7.3, where it would permit polymorphic deserialization of a malicious object using commons-configuration 1 and 2 JNDI classes. An attacker could use this flaw to execute arbitrary code.

In Gxlcms QY v1.0.0713, Lib\Lib\Action\Home\HitsAction.class.php allows remote attackers to read data from a database by embedding a FROM clause in a query string within a Home-Hits request, as demonstrated hy sid=user,password%20from%20mysql.user%23.

http4k is a functional toolkit for Kotlin HTTP applications. Prior to version 5.41.0.0, there is a potential XXE (XML External Entity Injection) vulnerability when http4k handling malicious XML contents within requests, which might allow attackers to read local sensitive information on server, trigger Server-side Request Forgery and even execute code under some circumstances. Version 5.41.0.0 contains a patch for the issue.

An attacker with basic privileges in SAP BusinessObjects Business Intelligence Platform (Promotion Management) - versions 420, 430, can get access to lcmbiar file and further decrypt the file. After this attacker can gain access to BI user’s passwords and depending on the privileges of the BI user, the attacker can perform operations that can completely compromise the application.

Jizhicms v2.5 was discovered to contain an arbitrary file download vulnerability via the component /admin/c/PluginsController.php.

HGiga PowerStation has a vulnerability of Information Leakage. An unauthenticated remote attacker can exploit this vulnerability to obtain the administrator's credential. This credential can then be used to login PowerStation or Secure Shell to achieve remote code execution.

Within White Rabbit Switch it's possible as an unauthenticated user to retrieve sensitive information such as password hashes and the SNMP community strings.

An issue was discovered in Foxit PhantomPDF before 8.3.6. It allows Remote Code Execution via a GoToE or GoToR action.

Adobe Framemaker Publishing Server versions 2020.3, 2022.2 and earlier are affected by an Information Exposure vulnerability (CWE-200) that could lead to privilege escalation. An attacker could exploit this vulnerability to gain access to sensitive information which may include system or user privileges. Exploitation of this issue does not require user interaction.

An issue was discovered on KuWFi GC111 GC111-GL-LM321_V3.0_20191211 devices. The TELNET service is enabled by default and exposed over the WAN interface without authentication.

An SQL injection vulnerability exists in the BIG-IP Next Central Manager API (URI).  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

The Memos application, up to version v0.24.3, allows for the embedding of markdown images with arbitrary URLs. When a user views a memo containing such an image, their browser automatically fetches the image URL without explicit user consent or interaction beyond viewing the memo. This can be exploited by an attacker to disclose the viewing user's IP address, browser User-Agent string, and potentially other request-specific information to the attacker-controlled server, leading to information disclosure and user tracking.

Dell BSAFE Crypto-C Micro Edition, versions before 4.1.5, and Dell BSAFE Micro Edition Suite, versions before 4.6, contain an Observable Timing Discrepancy Vulnerability.

An OData injection vulnerability exists in the BIG-IP Next Central Manager API (URI).  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Exposure of sensitive information to an unauthorized actor in Power Automate allows an unauthorized attacker to elevate privileges over a network.