If the upload course tool in Moodle was used to delete an enrollment method which did not exist or was not already enabled, the tool would erroneously enable that enrollment method. This could lead to unintended users gaining access to the course. Versions affected: 3.9 to 3.9.2, 3.8 to 3.8.5, 3.7 to 3.7.8, 3.5 to 3.5.14 and earlier unsupported versions. This is fixed in moodle 3.9.3, 3.8.6, 3.7.9, 3.5.15, and 3.10.

A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query.

A vulnerability has been found in LoveCards LoveCardsV2 up to 2.3.2 and classified as critical. This vulnerability affects unknown code of the file /api/system/other of the component Setting Handler. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An improper access control vulnerability [CWE-284] in FortiOS version 7.2.0, version 7.0.13 and below, version 6.4.14 and below and FortiProxy version 7.2.3 and below, version 7.0.9 and below, version 2.0.12 and below may allow a remote unauthenticated attacker to bypass the firewall deny geolocalisation policy via timing the bypass with a GeoIP database update.

On EX4300, EX4600, QFX3500, and QFX5100 Series, a vulnerability in the IP firewall filter component may cause the firewall filter evaluation of certain packets to fail. This issue only affects firewall filter evaluation of certain packets destined to the device Routing Engine (RE). This issue does not affect the Layer 2 firewall filter evaluation nor does it affect the Layer 3 firewall filter evaluation destined to connected hosts. This issue may occur when evaluating both IPv4 or IPv6 packets. This issue affects Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D12 on QFX5100 Series and EX4600 Series; 14.1X53 versions prior to 14.1X53-D52 on QFX3500 Series; 14.1X53 versions prior to 14.1X53-D48 on EX4300 Series; 15.1 versions prior to 15.1R7-S3 on EX4300 Series; 16.1 versions prior to 16.1R7 on EX4300 Series; 17.1 versions prior to 17.1R3 on EX4300 Series; 17.2 versions prior to 17.2R3 on EX4300 Series; 17.3 versions prior to 17.3R2-S5, 17.3R3 on EX4300 Series; 17.4 versions prior to 17.4R2 on EX4300 Series; 18.1 versions prior to 18.1R3 on EX4300 Series; 18.2 versions prior to 18.2R2 on EX4300 Series.

The web interface of the 1734-AENTR communication module mishandles authentication for HTTP POST requests. A remote, unauthenticated attacker can send a crafted request that may allow for modification of the configuration settings.

A vulnerability in the implementation of access control rules for loopback interfaces in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should have been blocked to a loopback interface. This vulnerability is due to improper enforcement of access control rules for loopback interfaces. An attacker could exploit this vulnerability by sending traffic to a loopback interface on an affected device. A successful exploit could allow the attacker to bypass configured access control rules and send traffic that should have been blocked to a loopback interface on the device.

Permission control vulnerability in the audio module. Successful exploitation of this vulnerability may cause an app to be activated automatically.

Discourse is an open source discussion platform. The embeddable comments can be exploited to create new topics as any user but without any clear title or content. This issue is patched in the latest stable, beta and tests-passed versions of Discourse. As a workaround, disable embeddable comments by deleting all embeddable hosts.

A broken access control vulnerability in the First_network_func function of spx_restservice allows an attacker to arbitrarily change the network configuration of the BMC. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Improper access control vulnerability in Smart Touch Call prior to version 1.0.0.5 allows arbitrary webpage loading in webview.

The Thrive Optimize WordPress plugin before 1.4.13.3, Thrive Comments WordPress plugin before 1.4.15.3, Thrive Headline Optimizer WordPress plugin before 1.3.7.3, Thrive Leads WordPress plugin before 2.3.9.4, Thrive Ultimatum WordPress plugin before 2.3.9.4, Thrive Quiz Builder WordPress plugin before 2.3.9.4, Thrive Apprentice WordPress plugin before 2.3.9.4, Thrive Visual Editor WordPress plugin before 2.6.7.4, Thrive Dashboard WordPress plugin before 2.3.9.3, Thrive Ovation WordPress plugin before 2.4.5, Thrive Clever Widgets WordPress plugin before 1.57.1 and Rise by Thrive Themes WordPress theme before 2.0.0, Ignition by Thrive Themes WordPress theme before 2.0.0, Luxe by Thrive Themes WordPress theme before 2.0.0, FocusBlog by Thrive Themes WordPress theme before 2.0.0, Minus by Thrive Themes WordPress theme before 2.0.0, Squared by Thrive Themes WordPress theme before 2.0.0, Voice WordPress theme before 2.0.0, Performag by Thrive Themes WordPress theme before 2.0.0, Pressive by Thrive Themes WordPress theme before 2.0.0, Storied by Thrive Themes WordPress theme before 2.0.0, Thrive Themes Builder WordPress theme before 2.2.4 register a REST API endpoint associated with Zapier functionality. While this endpoint was intended to require an API key in order to access, it was possible to access it by supplying an empty api_key parameter in vulnerable versions if Zapier was not enabled. Attackers could use this endpoint to add arbitrary data to a predefined option in the wp_options table.

An Incorrect Access Control vulnerability was found in /smsa/add_class.php and /smsa/add_class_submit.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to add a new class entry.

An Incorrect Access Control vulnerability was found in /smsa/add_subject.php and /smsa/add_subject_submit.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to add a new subject entry.

A vulnerability in the EtherChannel port subscription logic of Cisco Nexus 9500 Series Switches could allow an unauthenticated, remote attacker to bypass access control list (ACL) rules that are configured on an affected device. This vulnerability is due to oversubscription of resources that occurs when applying ACLs to port channel interfaces. An attacker could exploit this vulnerability by attempting to access network resources that are protected by the ACL. A successful exploit could allow the attacker to access network resources that would be protected by the ACL that was applied on the port channel interface.

A vulnerability in the email filtering mechanism of Cisco Secure Email Gateway could allow an unauthenticated, remote attacker to bypass the configured rules and allow emails that should have been denied to flow through an affected device.   This vulnerability is due to improper handling of email that passes through an affected device. An attacker could exploit this vulnerability by sending a crafted email through the affected device. A successful exploit could allow the attacker to bypass email filters on the affected device.

Mattermost versions 9.5.x <= 9.5.5 and 9.8.0, when using shared channels with multiple remote servers connected, fail to check that the remote server A requesting the server B to update the profile picture of a user is the remote that actually has the user as a local one . This allows a malicious remote A to change the profile images of users that belong to another remote server C that is connected to the server A.

A vulnerability in the IP geolocation rules of Snort 3 could allow an unauthenticated, remote attacker to potentially bypass IP address restrictions. This vulnerability exists because the configuration for IP geolocation rules is not parsed properly. An attacker could exploit this vulnerability by spoofing an IP address until they bypass the restriction. A successful exploit could allow the attacker to bypass location-based IP address restrictions.

An issue was discovered in Siren Investigate before 12.1.7. There is an ACL bypass on global objects.

A vulnerability in the FTP inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass FTP inspection. The vulnerability is due to ineffective flow tracking of FTP traffic. An attacker could exploit this vulnerability by sending crafted FTP traffic through an affected device. A successful exploit could allow the attacker to bypass FTP inspection and successfully complete FTP connections.

The Docker image of ownCloud Server through 10.11 contains a misconfiguration that renders the trusted_domains config useless. This could be abused to spoof the URL in password-reset e-mail messages.

A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied.

An incorrect permission assignment vulnerability allows an attacker to modify product configuration files.

Unauth. Plugin Settings Change vulnerability in Modula plugin <= 2.6.9 on WordPress.

Vulnerability in the Oracle Access Manager product of Oracle Fusion Middleware (component: Authentication Engine). The supported version that is affected is 12.2.1.3.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Access Manager. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Access Manager accessible data. CVSS 3.1 Base Score 5.3 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N).

A vulnerability classified as critical has been found in SourceCodester Alphaware Simple E-Commerce System 1.0. This affects an unknown part of the file /alphaware/summary.php of the component Payment Handler. The manipulation of the argument amount leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-221733 was assigned to this vulnerability.

A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic.&nbsp; This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials. SNMP with IPv6 ACL configurations is not affected. For more information, see the section of this advisory.

An issue was discovered in Gajim through 1.4.7. The vulnerability allows attackers, via crafted XML stanzas, to correct messages that were not sent by them. The attacker needs to be part of the group chat or single chat. The fixed version is 1.5.0.

Access control vulnerability in Evoh NFT EvohClaimable contract with sha256 hash code fa2084d5abca91a62ed1d2f1cad3ec318e6a9a2d7f1510a00d898737b05f48ae allows remote attackers to execute fraudulent NFT transfers.

Dell Wyse Management Suite 3.6.1 and below contains an Improper Access control vulnerability in UI. An attacker with no access to Alert Classification page could potentially exploit this vulnerability, leading to the change the alert categories.

Some Dahua embedded products have a vulnerability of unauthorized modification of the device timestamp. By sending a specially crafted packet to the vulnerable interface, an attacker can modify the device system time.

ICG.AspNetCore.Utilities.CloudStorage is a collection of cloud storage utilities to assist with the management of files for cloud upload. Users of this library that set a duration for a SAS Uri with a value other than 1 hour may have generated a URL with a duration that is longer, or shorter than desired. Users not implemented SAS Uri's are unaffected. This issue was resolved in version 8.0.0 of the library.

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.