Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Suricata can run out of memory when parsing crafted HTTP/2 traffic. Upgrade to 6.0.20 or 7.0.6.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Crafted modbus traffic can lead to unlimited resource accumulation within a flow. Upgrade to 7.0.6. Set a limited stream.reassembly.depth to reduce the issue.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.5 and 6.0.19, a small amount of HTTP/2 traffic can lead to Suricata using a large amount of memory. The issue has been addressed in Suricata 7.0.5 and 6.0.19. Workarounds include disabling the HTTP/2 parser and reducing `app-layer.protocols.http2.max-table-size` value (default is 65536).

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4.

LibHTP is a security-aware parser for the HTTP protocol. Crafted traffic can cause excessive processing time of HTTP headers, leading to denial of service. This issue is addressed in 0.5.46.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Version 0.5.46 may parse malformed request traffic, leading to excessive CPU usage. Version 0.5.47 contains a patch for the issue. No known workarounds are available.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions 7.0.10 and below and 8.0.0-beta1 through 8.0.0-rc1, mishandling of data on HTTP2 stream 0 can lead to uncontrolled memory usage, leading to loss of visibility. Workarounds include disabling the HTTP/2 parser, and using a signature like drop http2 any any -> any any (frame:http2.hdr; byte_test:1,=,0,3; byte_test:4,=,0,5; sid: 1;) where the first byte test tests the HTTP2 frame type DATA and the second tests the stream id 0. This is fixed in versions 7.0.11 and 8.0.0.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.3, excessive memory use during pgsql parsing could lead to OOM-related crashes. This vulnerability is patched in 7.0.3. As workaround, users can disable the pgsql app layer parser.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 6.0.16 and 7.0.3, an attacker can craft traffic to cause Suricata to use far more CPU and memory for processing the traffic than needed, which can lead to extreme slow downs and denial of service. This vulnerability is patched in 6.0.16 or 7.0.3. Workarounds include disabling the affected protocol app-layer parser in the yaml and reducing the `stream.reassembly.depth` value helps reduce the severity of the issue.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.8, a specially crafted TCP stream can lead to a very large buffer overflow while being zero-filled during initialization with memset due to an unsigned integer underflow. The issue has been addressed in Suricata 7.0.8.

Suricata before 5.0.7 and 6.x before 6.0.3 has a "critical evasion."

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. A memory allocation failure due to `http.memcap` being reached leads to a NULL-ptr reference leading to a crash. Upgrade to 7.0.6.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, rules using datasets with the non-functional / unimplemented "unset" option can trigger an assertion during traffic parsing, leading to denial of service. This issue is addressed in 7.0.7. As a workaround, use only trusted and well tested rulesets.

A buffer over-read issue was discovered in Suricata 4.1.x before 4.1.4. If the input of the decode-mpls.c function DecodeMPLS is composed only of a packet of source address and destination address plus the correct type field and the right number for shim, an attacker can manipulate the control flow, such that the condition to leave the loop is true. After leaving the loop, the network packet has a length of 2 bytes. There is no validation of this length. Later on, the code tries to read at an empty position, leading to a crash.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.8, a large input buffer to the to_lowercase, to_uppercase, strip_whitespace, compress_whitespace, dotprefix, header_lowercase, strip_pseudo_headers, url_decode, or xor transform can lead to a stack overflow causing Suricata to crash. The issue has been addressed in Suricata 7.0.8.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.8, DNS resource name compression can lead to small DNS messages containing very large hostnames which can be costly to decode, and lead to very large DNS log records. While there are limits in place, they were too generous. The issue has been addressed in Suricata 7.0.8.

LibHTP is a security-aware parser for the HTTP protocol and its related bits and pieces. In versions 0.5.50 and below, there is a traffic-induced memory leak that can starve the process of memory, leading to loss of visibility. To workaround this issue, set `suricata.yaml app-layer.protocols.http.libhtp.default-config.lzma-enabled` to false. This issue is fixed in version 0.5.51.

libhtp 0.5.15 allows remote attackers to cause a denial of service (NULL pointer dereference).

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, invalid ALPN in TLS/QUIC traffic when JA4 matching/logging is enabled can lead to Suricata aborting with a panic. This issue has been addressed in 7.0.7. One may disable ja4 as a workaround.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, missing initialization of the random seed for "thash" leads to byte-range tracking having predictable hash table behavior. This can lead to an attacker forcing lots of data into a single hash bucket, leading to severe performance degradation. This issue has been addressed in 7.0.7.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, missing initialization of the random seed for "thash" leads to datasets having predictable hash table behavior. This can lead to dataset file loading to use excessive time to load, as well as runtime performance issues during traffic handling. This issue has been addressed in 7.0.7. As a workaround, avoid loading datasets from untrusted sources. Avoid dataset rules that track traffic in rules.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Datasets declared in rules have an option to specify the `hashsize` to use. This size setting isn't properly limited, so the hash table allocation can be large. Untrusted rules can lead to large memory allocations, potentially leading to denial of service due to resource starvation. This vulnerability is fixed in 7.0.9.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. The bytes setting in the decode_base64 keyword is not properly limited. Due to this, signatures using the keyword and setting can cause large memory allocations of up to 4 GiB per thread. This vulnerability is fixed in 7.0.9.

An issue in the sqlg_place_dpipes component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

An allocation-size-too-big bug in the component /imagebuf.cpp of OpenImageIO v3.1.0.0dev may cause a Denial of Service (DoS) when the program to requests to allocate too much space.

In AXESS ACS (Auto Configuration Server) through 5.2.0, unsanitized user input in the TR069 API allows remote unauthenticated attackers to cause a permanent Denial of Service via crafted TR069 requests on TCP port 9675 or 7547. Rebooting does not resolve the permanent Denial of Service.

In Matter (aka connectedhomeip or Project CHIP) through 1.4.0.0 before e3277eb, unlimited user label appends in a userlabel cluster can lead to a denial of service (resource exhaustion).

An issue was discovered in the ckb crate before 0.40.0 for Rust. Remote attackers may be able to conduct a 51% attack against the Nervos CKB blockchain by triggering an inability to allocate memory for the misbehavior HashMap.

Keep-alive HTTP and HTTPS connections can remain open and inactive for up to 2 minutes in Node.js 6.16.0 and earlier. Node.js 8.0.0 introduced a dedicated server.keepAliveTimeout which defaults to 5 seconds. The behavior in Node.js 6.16.0 and earlier is a potential Denial of Service (DoS) attack vector. Node.js 6.17.0 introduces server.keepAliveTimeout and the 5-second default.

python-multipart is a streaming multipart parser for Python. When parsing form data, python-multipart skips line breaks (CR \r or LF \n) in front of the first boundary and any tailing bytes after the last boundary. This happens one byte at a time and emits a log event each time, which may cause excessive logging for certain inputs. An attacker could abuse this by sending a malicious request with lots of data before the first or after the last boundary, causing high CPU load and stalling the processing thread for a significant amount of time. In case of ASGI application, this could stall the event loop and prevent other requests from being processed, resulting in a denial of service (DoS). This vulnerability is fixed in 0.0.18.

Synapse is an open-source Matrix homeserver. In Synapse before 1.120.1, multipart/form-data requests can in certain configurations transiently increase memory consumption beyond expected levels while processing the request, which can be used to amplify denial of service attacks. Synapse 1.120.1 resolves the issue by denying requests with unsupported multipart/form-data content type.

In Bitcoin Core before 0.18.0, a node could be stalled for hours when processing the orphans of a crafted unconfirmed transaction.

Bitcoin Core before 0.20.0 allows remote attackers to cause a denial of service (infinite loop) via a malformed GETDATA message.

Bitcoin Core before 0.20.0 allows remote attackers to cause a denial of service (memory consumption) via a crafted INV message.

An issue in Espressif Esp idf v5.3.0 allows attackers to cause a Denial of Service (DoS) via a crafted data channel packet.

Werkzeug is a Web Server Gateway Interface web application library. Applications using `werkzeug.formparser.MultiPartParser` corresponding to a version of Werkzeug prior to 3.0.6 to parse `multipart/form-data` requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds. Werkzeug version 3.0.6 fixes this issue.

An issue was discovered in FIS GT.M through V7.0-000 (related to the YottaDB code base). Using crafted input, an attacker can control the size of a memset that occurs in calls to util_format in sr_unix/util_output.c.

There is a possible denial of service vulnerability in Action View (Rails) <5.2.2.1, <5.1.6.2, <5.0.7.2, <4.2.11.1 where specially crafted accept headers can cause action view to consume 100% cpu and make the server unresponsive.

A allocation of resources without limits or throttling in Fortinet FortiSIEM 5.3 all versions, 5.4 all versions, 6.x all versions, 7.0 all versions, and 7.1.0 through 7.1.5 may allow an attacker to deny valid TLS traffic via consuming all allotted connections.

A vulnerability has been found in WEKA INTEREST Security Scanner up to 1.8 and classified as problematic. This vulnerability affects unknown code of the component Portscan. The manipulation with an unknown input leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Yeti bridges the gap between CTI and DFIR practitioners by providing a Forensics Intelligence platform and pipeline. Remote user-controlled data tags can reach a Unicode normalization with a compatibility form NFKD. Under Windows, such normalization is costly in resources and may lead to denial of service with attacks such as One Million Unicode payload. This can get worse with the use of special Unicode characters like U+2100 (℀), or U+2105 (℅) which could lead the payload size to be tripled. Versions prior to 2.1.11 are affected by this vulnerability. The patch is included in 2.1.11.

An issue was discovered in Django 3.2 before 3.2.23, 4.1 before 4.1.13, and 4.2 before 4.2.7. The NFKC normalization is slow on Windows. As a consequence, django.contrib.auth.forms.UsernameField is subject to a potential DoS (denial of service) attack via certain inputs with a very large number of Unicode characters.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.14.1), RUGGEDCOM ROX RX1400 (All versions < V2.14.1), RUGGEDCOM ROX RX1500 (All versions < V2.14.1), RUGGEDCOM ROX RX1501 (All versions < V2.14.1), RUGGEDCOM ROX RX1510 (All versions < V2.14.1), RUGGEDCOM ROX RX1511 (All versions < V2.14.1), RUGGEDCOM ROX RX1512 (All versions < V2.14.1), RUGGEDCOM ROX RX1524 (All versions < V2.14.1), RUGGEDCOM ROX RX1536 (All versions < V2.14.1), RUGGEDCOM ROX RX5000 (All versions < V2.14.1). Affected devices write crashdumps without checking if enough space is available on the filesystem. Once the crashdump fills the entire root filesystem, affected devices fail to boot successfully. An attacker can leverage this vulnerability to cause a permanent Denial-of-Service.

modern-async is an open source JavaScript tooling library for asynchronous operations using async/await and promises. In affected versions a bug affecting two of the functions in this library: forEachSeries and forEachLimit. They should limit the concurrency of some actions but, in practice, they don't. Any code calling these functions will be written thinking they would limit the concurrency but they won't. This could lead to potential security issues in other projects. The problem has been patched in 1.0.4. There is no workaround.

An excessive memory use issue (CWE-770) exists in Email-MIME, before version 1.954, which can cause denial of service when parsing multipart MIME messages. The patch set (from 2020 and 2024) limits excessive depth and the total number of parts.

OpenTelemetry-Go Contrib is a collection of third-party packages for OpenTelemetry-Go. Prior to version 0.46.0, the grpc Unary Server Interceptor out of the box adds labels `net.peer.sock.addr` and `net.peer.sock.port` that have unbound cardinality. It leads to the server's potential memory exhaustion when many malicious requests are sent. An attacker can easily flood the peer address and port for requests. Version 0.46.0 contains a fix for this issue. As a workaround to stop being affected, a view removing the attributes can be used. The other possibility is to disable grpc metrics instrumentation by passing `otelgrpc.WithMeterProvider` option with `noop.NewMeterProvider`.

In Node.js including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1, an attacker can cause a Denial of Service (DoS) by establishing an HTTP or HTTPS connection in keep-alive mode and by sending headers very slowly. This keeps the connection and associated resources alive for a long period of time. Potential attacks are mitigated by the use of a load balancer or other proxy layer. This vulnerability is an extension of CVE-2018-12121, addressed in November and impacts all active Node.js release lines including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1.

MediaWiki before 1.36.2 allows a denial of service (resource consumption because of lengthy query processing time). ApiQueryBacklinks (action=query&list=backlinks) can cause a full table scan.

ida64.dll in Hex-Rays IDA Pro through 8.4 crashes when there is a section that has many jumps linked, and the final jump corresponds to the payload from where the actual entry point will be invoked. NOTE: in many use cases, this is an inconvenience but not a security issue.

Dell EMC Open Manage System Administrator (OMSA) versions prior to 9.3.0 contain an Improper Range Header Processing Vulnerability. A remote unauthenticated attacker may send crafted requests with overlapping ranges to cause the application to compress each of the requested bytes, resulting in a crash due to excessive memory consumption and preventing users from accessing the system.