GStreamer is a library for constructing graphs of media-handling components. An OOB-Write has been detected in the function gst_parse_vorbis_setup_packet within vorbis_parse.c. The integer size is read from the input file without proper validation. As a result, size can exceed the fixed size of the pad->vorbis_mode_sizes array (which size is 256). When this happens, the for loop overwrites the entire pad structure with 0s and 1s, affecting adjacent memory as well. This OOB-write can overwrite up to 380 bytes of memory beyond the boundaries of the pad->vorbis_mode_sizes array. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. stack-buffer overflow has been detected in the gst_opus_dec_parse_header function within `gstopusdec.c'. The pos array is a stack-allocated buffer of size 64. If n_channels exceeds 64, the for loop will write beyond the boundaries of the pos array. The value written will always be GST_AUDIO_CHANNEL_POSITION_NONE. This bug allows to overwrite the EIP address allocated in the stack. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An out-of-bounds write vulnerability was identified in the convert_to_s334_1a function in isomp4/qtdemux.c. The vulnerability arises due to a discrepancy between the size of memory allocated to the storage array and the loop condition i * 2 < ccpair_size. Specifically, when ccpair_size is even, the allocated size in storage does not match the loop's expected bounds, resulting in an out-of-bounds write. This bug allows for the overwriting of up to 3 bytes beyond the allocated bounds of the storage array. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. The program attempts to reallocate the memory pointed to by stream->samples to accommodate stream->n_samples + samples_count elements of type QtDemuxSample. The problem is that samples_count is read from the input file. And if this value is big enough, this can lead to an integer overflow during the addition. As a consequence, g_try_renew might allocate memory for a significantly smaller number of elements than intended. Following this, the program iterates through samples_count elements and attempts to write samples_count number of elements, potentially exceeding the actual allocated memory size and causing an OOB-write. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A stack-buffer overflow has been detected in the `vorbis_handle_identification_packet` function within `gstvorbisdec.c`. The position array is a stack-allocated buffer of size 64. If vd->vi.channels exceeds 64, the for loop will write beyond the boundaries of the position array. The value written will always be `GST_AUDIO_CHANNEL_POSITION_NONE`. This vulnerability allows someone to overwrite the EIP address allocated in the stack. Additionally, this bug can overwrite the `GstAudioInfo` info structure. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An uninitialized stack variable vulnerability has been identified in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. When size < 4, the program calls gst_buffer_unmap with an uninitialized map variable. Then, in the gst_memory_unmap function, the program will attempt to unmap the buffer using the uninitialized map variable, causing a function pointer hijack, as it will jump to mem->allocator->mem_unmap_full or mem->allocator->mem_unmap. This vulnerability could allow an attacker to hijack the execution flow, potentially leading to code execution. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in the function qtdemux_parse_theora_extension within qtdemux.c. The vulnerability occurs due to an underflow of the gint size variable, which causes size to hold a large unintended value when cast to an unsigned integer. This 32-bit negative value is then cast to a 64-bit unsigned integer (0xfffffffffffffffa) in a subsequent call to gst_buffer_new_and_alloc. The function gst_buffer_new_allocate then attempts to allocate memory, eventually calling _sysmem_new_block. The function _sysmem_new_block adds alignment and header size to the (unsigned) size, causing the overflow of the 'slice_size' variable. As a result, only 0x89 bytes are allocated, despite the large input size. When the following memcpy call occurs in gst_buffer_fill, the data from the input file will overwrite the content of the GstMapInfo info structure. Finally, during the call to gst_memory_unmap, the overwritten memory may cause a function pointer hijack, as the mem->allocator->mem_unmap_full function is called with a corrupted pointer. This function pointer overwrite could allow an attacker to alter the execution flow of the program, leading to arbitrary code execution. This vulnerability is fixed in 1.24.10.

GStreamer H266 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of H266 sei messages. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27381.

GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of tile list data within AV1-encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22873.

GStreamer before 1.18.4 might cause heap corruption when parsing certain malformed Matroska files.

In GStreamer through 1.26.1, the subparse plugin's tmplayer_parse_line function may dereference a NULL pointer while parsing a subtitle file, leading to a crash.

In GStreamer through 1.26.1, the subparse plugin's subrip_unescape_formatting function may dereference a NULL pointer while parsing a subtitle file, leading to a crash.

GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of metadata within AV1 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22300.

GStreamer H265 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of H265 slice headers. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26596.

GStreamer AV1 Codec Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of AV1 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22226.

The html_context_handle_element function in gst/subparse/samiparse.c in gst-plugins-base in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds write) via a crafted SMI file, as demonstrated by OneNote_Manager.smi.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been detected in the parse_lrc function within gstsubparse.c. The parse_lrc function calls strchr() to find the character ']' in the string line. The pointer returned by this call is then passed to g_strdup(). However, if the string line does not contain the character ']', strchr() returns NULL, and a call to g_strdup(start + 1) leads to a null pointer dereference. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference has been discovered in the id3v2_read_synch_uint function, located in id3v2.c. If id3v2_read_synch_uint is called with a null work->hdr.frame_data, the pointer guint8 *data is accessed without validation, resulting in a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_jpeg_dec_negotiate function in gstjpegdec.c. This function does not check for a NULL return value from gst_video_decoder_set_output_state. When this happens, dereferences of the outstate pointer will lead to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_parse_blockgroup_or_simpleblock function within matroska-demux.c. This function does not properly check the validity of the GstBuffer *sub pointer before performing dereferences. As a result, null pointer dereferences may occur. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. The function qtdemux_parse_sbgp in qtdemux.c is affected by a null dereference vulnerability. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-write vulnerability has been identified in the gst_ssa_parse_remove_override_codes function of the gstssaparse.c file. This function is responsible for parsing and removing SSA (SubStation Alpha) style override codes, which are enclosed in curly brackets ({}). The issue arises when a closing curly bracket "}" appears before an opening curly bracket "{" in the input string. In this case, memmove() incorrectly duplicates a substring. With each successive loop iteration, the size passed to memmove() becomes progressively larger (strlen(end+1)), leading to a write beyond the allocated memory bounds. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. This function does not properly check the validity of the stream->codec_priv pointer in the following code. If stream->codec_priv is NULL, the call to GST_READ_UINT16_LE will attempt to dereference a null pointer, leading to a crash of the application. This vulnerability is fixed in 1.24.10.

An exploitable denial of service vulnerability exists in the GstRTSPAuth functionality of GStreamer/gst-rtsp-server 1.14.5. A specially crafted RTSP setup request can cause a null pointer deference resulting in denial-of-service. An attacker can send a malicious packet to trigger this vulnerability.

DOS / potential heap overwrite in qtdemux using zlib decompression. Integer overflow in qtdemux element in qtdemux_inflate function which causes a segfault, or could cause a heap overwrite, depending on libc and OS. Depending on the libc used, and the underlying OS capabilities, it could be just a segfault or a heap overwrite.

Integer overflow in matroskademux element in gst_matroska_demux_add_wvpk_header function which allows a heap overwrite while parsing matroska files. Potential for arbitrary code execution through heap overwrite.

GStreamer SRT File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of SRT subtitle files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20968.

GStreamer before 1.16.0 has a heap-based buffer overflow in the RTSP connection parser via a crafted response from a server, potentially allowing remote code execution.

The _parse_pat function in the mpegts parser in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via a crafted file.

The FLIC decoder in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (out-of-bounds write and crash) via a crafted series of skip and count pairs.

The ROM mappings in the NSF decoder in gstreamer 0.10.x allow remote attackers to cause a denial of service (out-of-bounds read or write) and possibly execute arbitrary code via a crafted NSF music file.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_update_tracks function within matroska-demux.c. The vulnerability occurs when the gst_caps_is_equal function is called with invalid caps values. If this happen, then in the function gst_buffer_get_size the call to GST_BUFFER_MEM_PTR can return a null pointer. Attempting to dereference the size field of this null pointer results in a null pointer dereference. This vulnerability is fixed in 1.24.10.

Stack-based buffer overflow vulnerability exists in orcparse.c of ORC versions prior to 0.4.39. If a developer is tricked to process a specially crafted file with the affected ORC compiler, an arbitrary code may be executed on the developer's build environment. This may lead to compromise of developer machines or CI build environments.

In cd_CodeMsg of cd_codec.c, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-250100597References: N/A

In SDP_AddAttribute of sdp_db.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-261867748

Buffer overflow in system firmware for EDK II may allow unauthenticated user to potentially enable escalation of privilege and/or denial of service via network access.

In ixheaacd_adts_crc_start_reg of ixheaacd_adts_crc_check.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android-9. Android ID: A-113261928.

In CDMA PPP protocol, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privilege needed. User interaction is not needed for exploitation. Patch ID: MOLY01068234; Issue ID: ALPS08010003.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client. An attacker who successfully exploited the vulnerability could run arbitrary code on the client machine. To exploit the vulnerability, an attacker could send specially crafted DHCP responses to a client. The security update addresses the vulnerability by correcting how Windows DHCP clients handle certain DHCP responses.

In impeg2d_mc_fullx_fully of impeg2d_mc.c there is a possible out of bound write due to missing bounds check. This could lead to remote arbitrary code execution with no additional execution privileges needed. User interaction is needed for exploitation.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka "Microsoft Exchange Memory Corruption Vulnerability." This affects Microsoft Exchange Server.

In gatt_end_operation of gatt_utils.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

In the deserialization constructor of NanoAppFilter.java, there is a possible loss of data due to type confusion. This could lead to local escalation of privilege in the system server with no additional execution privileges needed. User interaction is not needed for exploitation.

The VMware vCenter Server contains a memory corruption vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger a memory corruption vulnerability which may bypass authentication.

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Improper access control settings in ASP Bootloader may allow an attacker to corrupt the return address causing a stack-based buffer overrun potentially leading to arbitrary code execution.

A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. Within `DecodeTreeBlock` which is called during the decompression of an XMI file, a UINT32 is loaded from the file and used as trusted input as the length of a buffer. An attacker can provide a malicious file to trigger this vulnerability.

A malicious DNS response can trigger a number of OOB reads, writes, and other memory issues