In the Linux kernel before 5.16.3, drivers/usb/dwc3/dwc3-qcom.c misinterprets the dwc3_qcom_create_urs_usb_platdev return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel before 5.16.3, drivers/bluetooth/hci_qca.c misinterprets the devm_gpiod_get_index_optional return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel before 6.1.2, kernel/module/decompress.c misinterprets the module_get_next_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Correctly move list in sc_disable() Commit 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()") incorrectly tries to move a list from one list head to another. The result is a kernel crash. The crash is triggered when a link goes down and there are waiters for a send to complete. The following signature is seen: BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] Call Trace: sc_disable+0x1ba/0x240 [hfi1] pio_freeze+0x3d/0x60 [hfi1] handle_freeze+0x27/0x1b0 [hfi1] process_one_work+0x1b0/0x380 ? process_one_work+0x380/0x380 worker_thread+0x30/0x360 ? process_one_work+0x380/0x380 kthread+0xd7/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 The fix is to use the correct call to move the list.

A null pointer dereference issue was found in the sctp network protocol in net/sctp/stream_sched.c in Linux Kernel. If stream_in allocation is failed, stream_out is freed which would further be accessed. A local user could use this flaw to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: rose: Fix NULL pointer dereference in rose_send_frame() The syzkaller reported an issue: KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: rcu_gp srcu_invoke_callbacks RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101 Call Trace: <IRQ> rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 [...] </IRQ> It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is called in the rose_send_frame(). It's the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr. It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf ("rose: Fix Null pointer dereference in rose_send_frame()") ever. But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ("rose: check NULL rose_loopback_neigh->loopback") again. We fix it by add NULL check in rose_transmit_clear_request(). When the 'dev' in 'neigh' is NULL, we don't reply the request and just clear it. syzkaller don't provide repro, and I provide a syz repro like: r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2) ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201}) r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0) bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40) connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c)

A null pointer dereference issue was found in can protocol in net/can/af_can.c in the Linux before Linux. ml_priv may not be initialized in the receive path of CAN frames. A local user could use this flaw to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-combo: fix NULL-deref on runtime resume Commit fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") started treating the PCS_USB registers as potentially separate from the PCS registers but used the wrong base when no PCS_USB offset has been provided. Fix the PCS_USB base used at runtime resume to prevent dereferencing a NULL pointer on platforms that do not provide a PCS_USB offset (e.g. SC7180).

In the Linux kernel, the following vulnerability has been resolved: f2fs: split initial and dynamic conditions for extent_cache Let's allocate the extent_cache tree without dynamic conditions to avoid a missing condition causing a panic as below. # create a file w/ a compressed flag # disable the compression # panic while updating extent_cache F2FS-fs (dm-64): Swapfile: last extent is not aligned to section F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N) Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k ================================================================== BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 Write of size 4 at addr 0000000000000030 by task syz-executor154/3327 CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1 Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023 Call Trace: __dump_stack out/common/lib/dump_stack.c:77 [inline] dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118 __kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415 kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428 kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186 __kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37 instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 __drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155 f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172 f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline] f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764 vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310 ksys_fallocate out/common/fs/open.c:333 [inline] __do_sys_fallocate out/common/fs/open.c:341 [inline] __se_sys_fallocate out/common/fs/open.c:339 [inline] __x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339 do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46

In the Linux kernel, the following vulnerability has been resolved: mm: migrate: fix getting incorrect page mapping during page migration When running stress-ng testing, we found below kernel crash after a few hours: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... After analyzing the vmcore, I found this issue is caused by page migration. The scenario is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. There are seveval ways to fix this issue: (1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving 'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target page has not built mappings yet. (2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing the system, however, there are still some PFN walkers that call page_mapping() without holding the page lock, such as compaction. (3) Using target page->private field to save the 'anon_vma' pointer and 2 bits page state, just as page->mapping records an anonymous page, which can remove the page_mapping() impact for PFN walkers and also seems a simple way. So I choose option 3 to fix this issue, and this can also fix other potential issues for PFN walkers, such as compaction.

In the Linux kernel, the following vulnerability has been resolved: usb: hub: Guard against accesses to uninitialized BOS descriptors Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup.

In the Linux kernel, the following vulnerability has been resolved: HID: betop: check shape of output reports betopff_init() only checks the total sum of the report counts for each report field to be at least 4, but hid_betopff_play() expects 4 report fields. A device advertising an output report with one field and 4 report counts would pass the check but crash the kernel with a NULL pointer dereference in hid_betopff_play().

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493860 ("Null pointer dereference")

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493866 ("Null pointer dereference")

kernel/trace/ftrace.c in the Linux kernel before 2.6.35.5, when debugfs is enabled, does not properly handle interaction between mutex possession and llseek operations, which allows local users to cause a denial of service (NULL pointer dereference and outage of all function tracing files) via an lseek call on a file descriptor associated with the set_ftrace_filter file.

In the Linux kernel, the following vulnerability has been resolved: thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR In some case, the GDDV returns a package with a buffer which has zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10). Then the data_vault_read() got NULL point dereference problem when accessing the 0x10 value in data_vault. [ 71.024560] BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or NULL value in data_vault.

In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: fou: Fix null-ptr-deref in GRO. We observed a null-ptr-deref in fou_gro_receive() while shutting down a host. [0] The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol in struct fou. When fou_release() is called due to netns dismantle or explicit tunnel teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data. Then, the tunnel socket is destroyed after a single RCU grace period. So, in-flight udp4_gro_receive() could find the socket and execute the FOU GRO handler, where sk->sk_user_data could be NULL. Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL checks in FOU GRO handlers. [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0 SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1 Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017 RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou] Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42 RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010 RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08 RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002 R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400 R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0 FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? no_context (arch/x86/mm/fault.c:752) ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483) ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571) ? fou_gro_receive (net/ipv4/fou.c:233) [fou] udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559) udp4_gro_receive (net/ipv4/udp_offload.c:604) inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7)) dev_gro_receive (net/core/dev.c:6035 (discriminator 4)) napi_gro_receive (net/core/dev.c:6170) ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena] ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena] napi_poll (net/core/dev.c:6847) net_rx_action (net/core/dev.c:6917) __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299) asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809) </IRQ> do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77) irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435) common_interrupt (arch/x86/kernel/irq.c:239) asm_common_interrupt (arch/x86/include/asm/idtentry.h:626) RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575) Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246 RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900 RDX: ffff93daee800000 RSI: ffff93d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rx_register() It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram() ./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer problem in free_mr_init() Lock grab occurs in a concurrent scenario, resulting in stepping on a NULL pointer. It should be init mutex_init() first before use the lock. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __mutex_lock.constprop.0+0xd0/0x5c0 __mutex_lock_slowpath+0x1c/0x2c mutex_lock+0x44/0x50 free_mr_send_cmd_to_hw+0x7c/0x1c0 [hns_roce_hw_v2] hns_roce_v2_dereg_mr+0x30/0x40 [hns_roce_hw_v2] hns_roce_dereg_mr+0x4c/0x130 [hns_roce_hw_v2] ib_dereg_mr_user+0x54/0x124 uverbs_free_mr+0x24/0x30 destroy_hw_idr_uobject+0x38/0x74 uverbs_destroy_uobject+0x48/0x1c4 uobj_destroy+0x74/0xcc ib_uverbs_cmd_verbs+0x368/0xbb0 ib_uverbs_ioctl+0xec/0x1a4 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x58/0x190 do_el0_svc+0x30/0x90 el0_svc+0x2c/0xb4 el0t_64_sync_handler+0x1a4/0x1b0 el0t_64_sync+0x19c/0x1a0

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_transport_sas: Fix error handling in sas_phy_add() If transport_add_device() fails in sas_phy_add(), the kernel will crash trying to delete the device in transport_remove_device() called from sas_remove_host(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_phy_delete+0x30/0x60 [scsi_transport_sas] do_sas_phy_delete+0x6c/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x40/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] hisi_sas_remove+0x40/0x68 [hisi_sas_main] hisi_sas_v2_remove+0x20/0x30 [hisi_sas_v2_hw] platform_remove+0x2c/0x60 Fix this by checking and handling return value of transport_add_device() in sas_phy_add().

In the Linux kernel, the following vulnerability has been resolved: net, neigh: Fix null-ptr-deref in neigh_table_clear() When IPv6 module gets initialized but hits an error in the middle, kenel panic with: KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f] CPU: 1 PID: 361 Comm: insmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370 RSP: 0018:ffff888012677908 EFLAGS: 00000202 ... Call Trace: <TASK> neigh_table_clear+0x94/0x2d0 ndisc_cleanup+0x27/0x40 [ipv6] inet6_init+0x21c/0x2cb [ipv6] do_one_initcall+0xd3/0x4d0 do_init_module+0x1ae/0x670 ... Kernel panic - not syncing: Fatal exception When ipv6 initialization fails, it will try to cleanup and calls: neigh_table_clear() neigh_ifdown(tbl, NULL) pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL)) # dev_net(NULL) triggers null-ptr-deref. Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev is NULL, to make kernel not panic immediately.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed There is a null-ptr-deref when xps sysfs alloc failed: BUG: KASAN: null-ptr-deref in sysfs_do_create_link_sd+0x40/0xd0 Read of size 8 at addr 0000000000000030 by task gssproxy/457 CPU: 5 PID: 457 Comm: gssproxy Not tainted 6.0.0-09040-g02357b27ee03 #9 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 kasan_report+0xa3/0x120 sysfs_do_create_link_sd+0x40/0xd0 rpc_sysfs_client_setup+0x161/0x1b0 rpc_new_client+0x3fc/0x6e0 rpc_create_xprt+0x71/0x220 rpc_create+0x1d4/0x350 gssp_rpc_create+0xc3/0x160 set_gssp_clnt+0xbc/0x140 write_gssp+0x116/0x1a0 proc_reg_write+0xd6/0x130 vfs_write+0x177/0x690 ksys_write+0xb9/0x150 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 When the xprt_switch sysfs alloc failed, should not add xprt and switch sysfs to it, otherwise, maybe null-ptr-deref; also initialize the 'xps_sysfs' to NULL to avoid oops when destroy it.

In the Linux kernel, the following vulnerability has been resolved: bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE When using bpftool to pin {PROG, MAP, LINK} without FILE, segmentation fault will occur. The reson is that the lack of FILE will cause strlen to trigger NULL pointer dereference. The corresponding stacktrace is shown below: do_pin do_pin_any do_pin_fd mount_bpffs_for_pin strlen(name) <- NULL pointer dereference Fix it by adding validation to the common process.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix region HPA ordering validation Some regions may not have any address space allocated. Skip them when validating HPA order otherwise a crash like the following may result: devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9 BUG: kernel NULL pointer dereference, address: 0000000000000000 [..] RIP: 0010:store_targetN+0x655/0x1740 [cxl_core] [..] Call Trace: <TASK> kernfs_fop_write_iter+0x144/0x200 vfs_write+0x24a/0x4d0 ksys_write+0x69/0xf0 do_syscall_64+0x3a/0x90 store_targetN+0x655/0x1740: alloc_region_ref at drivers/cxl/core/region.c:676 (inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850 (inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290 (inlined by) attach_target at drivers/cxl/core/region.c:1410 (inlined by) store_targetN at drivers/cxl/core/region.c:1453

A NULL pointer dereference flaw was found in rawv6_push_pending_frames in net/ipv6/raw.c in the network subcomponent in the Linux kernel. This flaw causes the system to crash.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters() On some machines the number of listed CPUs may be bigger than the actual CPUs that exist. The tracing subsystem allocates a per_cpu directory with access to the per CPU ring buffer via a cpuX file. But to save space, the ring buffer will only allocate buffers for online CPUs, even though the CPU array will be as big as the nr_cpu_ids. With the addition of waking waiters on the ring buffer when closing the file, the ring_buffer_wake_waiters() now needs to make sure that the buffer is allocated (with the irq_work allocated with it) before trying to wake waiters, as it will cause a NULL pointer dereference. While debugging this, I added a NULL check for the buffer itself (which is OK to do), and also NULL pointer checks against buffer->buffers (which is not fine, and will WARN) as well as making sure the CPU number passed in is within the nr_cpu_ids (which is also not fine if it isn't). Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1204705

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix decoder allocation crash When an intermediate port's decoders have been exhausted by existing regions, and creating a new region with the port in question in it's hierarchical path is attempted, cxl_port_attach_region() fails to find a port decoder (as would be expected), and drops into the failure / cleanup path. However, during cleanup of the region reference, a sanity check attempts to dereference the decoder, which in the above case didn't exist. This causes a NULL pointer dereference BUG. To fix this, refactor the decoder allocation and de-allocation into helper routines, and in this 'free' routine, check that the decoder, @cxld, is valid before attempting any operations on it.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix null-ptr-deref in ib_core_cleanup() KASAN reported a null-ptr-deref error: KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] CPU: 1 PID: 379 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:destroy_workqueue+0x2f/0x740 RSP: 0018:ffff888016137df8 EFLAGS: 00000202 ... Call Trace: ib_core_cleanup+0xa/0xa1 [ib_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa1a0d221b7 ... It is because the fail of roce_gid_mgmt_init() is ignored: ib_core_init() roce_gid_mgmt_init() gid_cache_wq = alloc_ordered_workqueue # fail ... ib_core_cleanup() roce_gid_mgmt_cleanup() destroy_workqueue(gid_cache_wq) # destroy an unallocated wq Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init().

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix possible use-after-free and null-ptr-deref The pernet operations structure for the subsystem must be registered before registering the generic netlink family.

In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers In case a IRQ based transfer times out the bcm2835_spi_handle_err() function is called. Since commit 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") the TX and RX DMA transfers are unconditionally canceled, leading to NULL pointer derefs if ctlr->dma_tx or ctlr->dma_rx are not set. Fix the NULL pointer deref by checking that ctlr->dma_tx and ctlr->dma_rx are valid pointers before accessing them.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel crash at mt7921_pci_remove The crash log shown it is possible that mt7921_irq_handler is called while devm_free_irq is being handled so mt76_free_device need to be postponed until devm_free_irq is completed to solve the crash we free the mt76 device too early. [ 9299.339655] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9299.339705] #PF: supervisor read access in kernel mode [ 9299.339735] #PF: error_code(0x0000) - not-present page [ 9299.339768] PGD 0 P4D 0 [ 9299.339786] Oops: 0000 [#1] SMP PTI [ 9299.339812] CPU: 1 PID: 1624 Comm: prepare-suspend Not tainted 5.15.14-1.fc32.qubes.x86_64 #1 [ 9299.339863] Hardware name: Xen HVM domU, BIOS 4.14.3 01/20/2022 [ 9299.339901] RIP: 0010:mt7921_irq_handler+0x1e/0x70 [mt7921e] [ 9299.340048] RSP: 0018:ffffa81b80c27cb0 EFLAGS: 00010082 [ 9299.340081] RAX: 0000000000000000 RBX: ffff98a4cb752020 RCX: ffffffffa96211c5 [ 9299.340123] RDX: 0000000000000000 RSI: 00000000000d4204 RDI: ffff98a4cb752020 [ 9299.340165] RBP: ffff98a4c28a62a4 R08: ffff98a4c37a96c0 R09: 0000000080150011 [ 9299.340207] R10: 0000000040000000 R11: 0000000000000000 R12: ffff98a4c4eaa080 [ 9299.340249] R13: ffff98a4c28a6360 R14: ffff98a4cb752020 R15: ffff98a4c28a6228 [ 9299.340297] FS: 00007260840d3740(0000) GS:ffff98a4ef700000(0000) knlGS:0000000000000000 [ 9299.340345] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9299.340383] CR2: 0000000000000008 CR3: 0000000004c56001 CR4: 0000000000770ee0 [ 9299.340432] PKRU: 55555554 [ 9299.340449] Call Trace: [ 9299.340467] <TASK> [ 9299.340485] __free_irq+0x221/0x350 [ 9299.340527] free_irq+0x30/0x70 [ 9299.340553] devm_free_irq+0x55/0x80 [ 9299.340579] mt7921_pci_remove+0x2f/0x40 [mt7921e] [ 9299.340616] pci_device_remove+0x3b/0xa0 [ 9299.340651] __device_release_driver+0x17a/0x240 [ 9299.340686] device_driver_detach+0x3c/0xa0 [ 9299.340714] unbind_store+0x113/0x130 [ 9299.340740] kernfs_fop_write_iter+0x124/0x1b0 [ 9299.340775] new_sync_write+0x15c/0x1f0 [ 9299.340806] vfs_write+0x1d2/0x270 [ 9299.340831] ksys_write+0x67/0xe0 [ 9299.340857] do_syscall_64+0x3b/0x90 [ 9299.340887] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: can: slcan: fix freed work crash The LTP test pty03 is causing a crash in slcan: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (events) RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185) Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968 RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0 RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734 R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0 FS: 0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0 Call Trace: <TASK> worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436) kthread (/home/rich/kernel/linux/kernel/kthread.c:376) ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312) Apparently, the slcan's tx_work is freed while being scheduled. While slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work), slcan_close() (tty side) does not. So when the netdev is never set UP, but the tty is stuffed with bytes and forced to wakeup write, the work is scheduled, but never flushed. So add an additional flush_work() to slcan_close() to be sure the work is flushed under all circumstances. The Fixes commit below moved flush_work() from slcan_close() to slcan_netdev_close(). What was the rationale behind it? Maybe we can drop the one in slcan_netdev_close()? I see the same pattern in can327. So it perhaps needs the very same fix.

In the Linux kernel, the following vulnerability has been resolved: xen/netfront: destroy queues before real_num_tx_queues is zeroed xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at https://github.com/QubesOS/qubes-issues/issues/7257

In the Linux kernel, the following vulnerability has been resolved: pinctrl: renesas: core: Fix possible null-ptr-deref in sh_pfc_map_resources() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver. MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo [172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018

In the Linux kernel, the following vulnerability has been resolved: af_unix: Get user_ns from in_skb in unix_diag_get_exact(). Wei Chen reported a NULL deref in sk_user_ns() [0][1], and Paolo diagnosed the root cause: in unix_diag_get_exact(), the newly allocated skb does not have sk. [2] We must get the user_ns from the NETLINK_CB(in_skb).sk and pass it to sk_diag_fill(). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12bbce067 P4D 12bbce067 PUD 12bc40067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 27942 Comm: syz-executor.0 Not tainted 6.1.0-rc5-next-20221118 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_user_ns include/net/sock.h:920 [inline] RIP: 0010:sk_diag_dump_uid net/unix/diag.c:119 [inline] RIP: 0010:sk_diag_fill+0x77d/0x890 net/unix/diag.c:170 Code: 89 ef e8 66 d4 2d fd c7 44 24 40 00 00 00 00 49 8d 7c 24 18 e8 54 d7 2d fd 49 8b 5c 24 18 48 8d bb 70 02 00 00 e8 43 d7 2d fd <48> 8b 9b 70 02 00 00 48 8d 7b 10 e8 33 d7 2d fd 48 8b 5b 10 48 8d RSP: 0018:ffffc90000d67968 EFLAGS: 00010246 RAX: ffff88812badaa48 RBX: 0000000000000000 RCX: ffffffff840d481d RDX: 0000000000000465 RSI: 0000000000000000 RDI: 0000000000000270 RBP: ffffc90000d679a8 R08: 0000000000000277 R09: 0000000000000000 R10: 0001ffffffffffff R11: 0001c90000d679a8 R12: ffff88812ac03800 R13: ffff88812c87c400 R14: ffff88812ae42210 R15: ffff888103026940 FS: 00007f08b4e6f700(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 000000012c58b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> unix_diag_get_exact net/unix/diag.c:285 [inline] unix_diag_handler_dump+0x3f9/0x500 net/unix/diag.c:317 __sock_diag_cmd net/core/sock_diag.c:235 [inline] sock_diag_rcv_msg+0x237/0x250 net/core/sock_diag.c:266 netlink_rcv_skb+0x13e/0x250 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x24/0x40 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4697f9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f08b4e6ec48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000077bf80 RCX: 00000000004697f9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000004d29e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf80 R13: 0000000000000000 R14: 000000000077bf80 R15: 00007ffdb36bc6c0 </TASK> Modules linked in: CR2: 0000000000000270 [1]: https://lore.kernel.org/netdev/CAO4mrfdvyjFpokhNsiwZiP-wpdSD0AStcJwfKcKQdAALQ9_2Qw@mail.gmail.com/ [2]: https://lore.kernel.org/netdev/e04315e7c90d9a75613f3993c2baf2d344eef7eb.camel@redhat.com/

In the Linux kernel, the following vulnerability has been resolved: io_uring: Fix a null-ptr-deref in io_tctx_exit_cb() Syzkaller reports a NULL deref bug as follows: BUG: KASAN: null-ptr-deref in io_tctx_exit_cb+0x53/0xd3 Read of size 4 at addr 0000000000000138 by task file1/1955 CPU: 1 PID: 1955 Comm: file1 Not tainted 6.1.0-rc7-00103-gef4d3ea40565 #75 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_tctx_exit_cb+0x53/0xd3 kasan_report+0xbb/0x1f0 ? io_tctx_exit_cb+0x53/0xd3 kasan_check_range+0x140/0x190 io_tctx_exit_cb+0x53/0xd3 task_work_run+0x164/0x250 ? task_work_cancel+0x30/0x30 get_signal+0x1c3/0x2440 ? lock_downgrade+0x6e0/0x6e0 ? lock_downgrade+0x6e0/0x6e0 ? exit_signals+0x8b0/0x8b0 ? do_raw_read_unlock+0x3b/0x70 ? do_raw_spin_unlock+0x50/0x230 arch_do_signal_or_restart+0x82/0x2470 ? kmem_cache_free+0x260/0x4b0 ? putname+0xfe/0x140 ? get_sigframe_size+0x10/0x10 ? do_execveat_common.isra.0+0x226/0x710 ? lockdep_hardirqs_on+0x79/0x100 ? putname+0xfe/0x140 ? do_execveat_common.isra.0+0x238/0x710 exit_to_user_mode_prepare+0x15f/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0023:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 002b:00000000fffb7790 EFLAGS: 00000200 ORIG_RAX: 000000000000000b RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... This happens because the adding of task_work from io_ring_exit_work() isn't synchronized with canceling all work items from eg exec. The execution of the two are ordered in that they are both run by the task itself, but if io_tctx_exit_cb() is queued while we're canceling all work items off exec AND gets executed when the task exits to userspace rather than in the main loop in io_uring_cancel_generic(), then we can find current->io_uring == NULL and hit the above crash. It's safe to add this NULL check here, because the execution of the two paths are done by the task itself. [axboe: add code comment and also put an explanation in the commit msg]

In the Linux kernel, the following vulnerability has been resolved: rtc: cmos: Fix event handler registration ordering issue Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit.

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Store vhost pointer during subcrq allocation Currently the back pointer from a queue to the vhost adapter isn't set until after subcrq interrupt registration. The value is available when a queue is first allocated and can/should be also set for primary and async queues as well as subcrqs. This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS interrupt controller where a pending subcrq interrupt from the previous kernel can be replayed immediately upon IRQ registration resulting in dereference of a garbage backpointer in ibmvfc_interrupt_scsi(). Kernel attempted to read user page (58) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000058 Faulting instruction address: 0xc008000003216a08 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc] LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 Call Trace: [c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable) [c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 [c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188 [c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310 [c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80 [c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0 [c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130 [c000000014622f60] [0000000020000000] 0x20000000 [c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0 [c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0 [c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170 [c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0 [c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0 [c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230 [c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc] [c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc] [c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc] [c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc] [c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]

In the Linux kernel, the following vulnerability has been resolved: pinctrl: renesas: rzn1: Fix possible null-ptr-deref in sh_pfc_map_resources() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes() In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode() is assigned to mode and is passed to drm_mode_probed_add() directly after that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and there is a dereference of it in list_add_tail() without recoveries, which could lead to NULL pointer dereference on failure of amdgpu_dm_create_common_mode(). Fix this by adding a NULL check of mode. This bug was found by a static analyzer. Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: net: sparx5: switchdev: fix possible NULL pointer dereference As the possible failure of the allocation, devm_kzalloc() may return NULL pointer. Therefore, it should be better to check the 'db' in order to prevent the dereference of NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: fix possible NULL pointer dereference As the possible failure of the allocation, kzalloc() may return NULL pointer. Therefore, it should be better to check the 'sgi' in order to prevent the dereference of NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix potential NULL pointer dereference If sd_probe() sees an early error before sdkp->device is initialized, sd_zbc_release_disk() is called. This causes a NULL pointer dereference when sd_is_zoned() is called inside that function. Avoid this by removing the call to sd_zbc_release_disk() in sd_probe() error path. This change is safe and does not result in zone information memory leakage because the zone information for a zoned disk is allocated only when sd_revalidate_disk() is called, at which point sdkp->disk_dev is fully set, resulting in sd_disk_release() being called when needed to cleanup a disk zone information using sd_zbc_release_disk().

In the Linux kernel, the following vulnerability has been resolved: pinctrl: ralink: Check for null return of devm_kcalloc Because of the possible failure of the allocation, data->domains might be NULL pointer and will cause the dereference of the NULL pointer later. Therefore, it might be better to check it and directly return -ENOMEM without releasing data manually if fails, because the comment of the devm_kmalloc() says "Memory allocated with this function is automatically freed on driver detach.".

In the Linux kernel, the following vulnerability has been resolved: i2c: dev: check return value when calling dev_set_name() If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref.