In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the dumpSyslog function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doSSLTunnel function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the ldap_search_dn function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the packet_monitor function.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the pingtrace function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doCertificate function.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in DrayTek Vigor 2960 1.5.1.4/1.5.1.5. Affected is an unknown function of the file mainfunction.cgi of the component Web Management Interface. The manipulation of the argument password leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-222258 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the value parameter in the filter_string function.

In DrayTek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the rename_table function.

Draytek devices Vigor 165/166 prior to v4.2.6 , Vigor 2620/LTE200 prior to v3.9.8.8, Vigor 2860/2925 prior to v3.9.7, Vigor 2862/2926 prior to v3.9.9.4, Vigor 2133/2762/2832 prior to v3.9.8, Vigor 2135/2765/2766 prior to v4.4.5.1, Vigor 2865/2866/2927 prior to v4.4.5.3, Vigor 2962/3910 prior to v4.3.2.7, Vigor 3912 prior to v4.3.5.2, and Vigor 2925 up to v3.9.6 were discovered to not utilize certificate verification, allowing attackers to upload crafted APPE modules from non-official servers, leading to arbitrary code execution.

An issue in the CGI endpoint used to upload configurations in Draytek devices Vigor 165/166 prior to v4.2.6 , Vigor 2620/LTE200 prior to v3.9.8.8, Vigor 2860/2925 prior to v3.9.7, Vigor 2862/2926 prior to v3.9.9.4, Vigor 2133/2762/2832 prior to v3.9.8, Vigor 2135/2765/2766 prior to v4.4.5.1, Vigor 2865/2866/2927 prior to v4.4.5.3, Vigor 2962/3910 prior to v4.3.2.7, Vigor 3912 prior to v4.3.5.2, and Vigor 2925 up to v3.9.6 allows attackers to upload a crafted kernel module, allowing for arbitrary code execution.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doIPSec function.

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the modifyrow function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doPPPo function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the sign_cacertificate function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the ruequest_certificate function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the setup_cacertificate function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the get_subconfig function.

DrayTek Vigor 3900 before v1.5.1.5_Beta, DrayTek Vigor 2960 before v1.5.1.5_Beta and DrayTek Vigor 300B before v1.5.1.5_Beta were discovered to contain a command injection vulnerability via the action parameter at cgi-bin/mainfunction.cgi.

/cgi-bin/activate.cgi on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve command injection via a remote HTTP request in DEBUG mode.

A Remote Command Injection vulnerability exists in DrayTek Vigor 2960 1.5.1.3, DrayTek Vigor 3900 1.5.1.3, and DrayTek Vigor 300B 1.5.1.3 via a crafted HTTP message containing malformed QUERY STRING in mainfunction.cgi, which could let a remote malicious user execute arbitrary code.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

On Draytek Vigor3900, Vigor2960, and Vigor 300B devices before 1.5.1.1, there are some command-injection vulnerabilities in the mainfunction.cgi file.

DrayTek Vigor2960 v1.5.1.4 allows an authenticated attacker with network access to the web management interface to inject operating system commands via the mainfunction.cgi 'parameter' parameter. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the acme_process function.

A vulnerability was determined in Belkin F9K1015 1.00.10. Impacted is an unknown function of the file /goform/formSetWanStatic. Executing manipulation of the argument m_wan_ipaddr can lead to command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Gerapy is a distributed crawler management framework. Prior to version 0.9.9, an authenticated user could execute arbitrary commands. This issue is fixed in version 0.9.9. There are no known workarounds.

A vulnerability was detected in Belkin F9K1015 1.00.10. Affected is an unknown function of the file /goform/mp. Performing manipulation of the argument command results in command injection. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Belkin F9K1015 1.00.10. Affected is an unknown function of the file /goform/formBSSetSitesurvey. Executing manipulation of the argument wan_ipaddr can lead to command injection. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

Improper neutralization of special elements used in a user input allows an authenticated malicious user to perform remote code execution in the host system. This vulnerability impacts SonicWall Switch 1.1.1.0-2s and earlier versions

A vulnerability was determined in D-Link DIR-823X 250416. The impacted element is the function uci_del of the file /goform/delete_prohibiting. This manipulation of the argument delvalue causes command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

A flaw has been found in D-Link DI-7100G C1 24.04.18D1. This affects the function start_proxy_client_email. Executing a manipulation can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used.

A vulnerability was detected in D-Link DIR-823x up to 250416. The affected element is an unknown function of the file /goform/diag_ping. Performing manipulation of the argument target_addr results in command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A vulnerability was determined in D-Link DIR-852 1.00CN B09. This issue affects the function ssdpcgi_main of the file htodcs/cgibin of the component Simple Service Discovery Protocol Service. Executing manipulation of the argument ST can lead to command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DIR-823X 250416. This vulnerability affects unknown code of the file /goform/delete_offline_device. Performing manipulation of the argument delvalue results in command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A vulnerability was identified in Wavlink WL-WN578W2 221110. This impacts the function sub_401340/sub_401BA4 of the file /cgi-bin/login.cgi. Such manipulation of the argument ipaddr leads to command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Wavlink NU516U1 M16U1_V240425. This impacts the function sub_403198 of the file /cgi-bin/wireless.cgi of the component SetName Page. The manipulation of the argument mac_5g leads to command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability exists when the authorized user passes crafted parameter to background process in the router. This affects 360 router series products (360 Safe Router P0,P1,P2,P3,P4), the affected version is V2.0.61.58897.

A vulnerability was found in Wavlink NU516U1 M16U1_V240425. The impacted element is the function sub_402D1C of the file /cgi-bin/wireless.cgi of the component DeleteMac Page. Performing manipulation of the argument delete_list results in command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Wavlink NU516U1 M16U1_V240425. Affected is the function sub_4016F0 of the file /cgi-bin/firewall.cgi. The manipulation of the argument del_flag results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

OpenProject is an open-source, web-based project management software. Versions prior to 16.6.6 and 17.0.2 have an arbitrary file write vulnerability in OpenProject’s repository diff download endpoint (`/projects/:project_id/repository/diff.diff`) when rendering a single revision via git show. By supplying a specially crafted rev value (for example, `rev=--output=/tmp/poc.txt)`, an attacker can inject git show command-line options. When OpenProject executes the SCM command, Git interprets the attacker-controlled rev as an option and writes the output to an attacker-chosen path. As a result, any user with the `:browse_repository` permission on the project can create or overwrite arbitrary files that the OpenProject process user is permitted to write. The written contents consist of git show output (commit metadata and patch), but overwriting application or configuration files still leads to data loss and denial of service, impacting integrity and availability. The issue has been fixed in OpenProject 17.0.2 and 16.6.6.

A weakness has been identified in D-Link DIR-823X 250416. Affected by this issue is the function sub_412E7C of the file /goform/set_switch_settings. This manipulation of the argument port causes command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited.

A flaw has been found in D-Link DIR-823X 250416. This issue affects some unknown processing of the file /goform/diag_traceroute. Executing manipulation of the argument target_addr can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used.

A weakness has been identified in Wavlink NU516U1. Affected by this vulnerability is the function sub_401B30 of the file /cgi-bin/firewall.cgi. This manipulation of the argument remoteManagementEnabled causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in mirweiye wenkucms up to 3.4. This impacts the function createPathOne of the file app/common/common.php. The manipulation results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used.

WeKnora is an LLM-powered framework designed for deep document understanding and semantic retrieval. Prior to version 0.2.5, there is a command injection vulnerability that allows authenticated users to inject stdio_config.command/args into MCP stdio settings, causing the server to execute subprocesses using these injected values. This issue has been patched in version 0.2.5.

A flaw has been found in Wavlink NU516U1 M16U1_V240425. Impacted is the function sub_403010 of the file /cgi-bin/wireless.cgi of the component AddMac Page. This manipulation of the argument macAddr causes command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.